All Products

Crossing Heated Dab Tool (Hot Knife) Load clean. Drop clean. No mess. The Crossing Heated Dab Tool is the easy way to load sticky concentrates into your wax pen or e-rig without scraping the sides of the bowl. A ceramic hot-knife tip, three voltage levels, and simple one-button controls let you warm and release your dab with precision. It’s compact, USB-C rechargeable, and comes with a protective cap for pocket-safe carry. Key Features Heated ceramic tip for smooth, mess-free loading 3 voltages (Blue / Green / Red) to match different concentrate textures Two heat modes: quick cycle (double-click) or manual hold USB-C charging with included cable Protective cover cap for safe storage 550 mAh battery for plenty of reloads between charges One-button operation—fast to learn, easy to use Why You’ll Like It Less mess: Warm the tip and your dab slides cleanly into the chamber—no more hard scraping. Better control: Choose a lower level for softer waxes or higher for firmer concentrates like shatter. Pocket-friendly: Lightweight, capped, and ready to travel. How to Use the Crossing Heated Dab Tool Remove the glass/plastic cap. Power on: Press the button 5× to turn on (repeat to turn off). Select voltage: Press 3× to cycle Blue → Green → Red. Heat the tip: Quick cycle: Press 2× to start a short auto heat. Manual: Press & hold to heat while you load. Scoop your concentrate, hover over the chamber, then warm the tip—after a few seconds the dab will slide off cleanly. Replace the cap when finished and power off. Tip: Use Blue/low for most waxes; bump to Red/high for firmer textures. Battery & Charging The integrated 550 mAh battery delivers many reloads per charge. Top up with the included USB-C cable. As with any small device, actual run-time will vary by heat level and usage. Easy Cleaning While the tip is still warm (not red-hot), wipe it with a vape-safe cleaning wipe to remove residue. Keep the protective cap on during storage to extend tip life and prevent debris. Specifications Tip Ceramic heated “hot-knife” style Heat Levels 3 voltages (Blue / Green / Red) Controls 1 button • 5× power • 3× level • 2× cycle • hold to heat Battery 550 mAh (integrated) Charging USB-C Cap Included protective cover Use Case Loading wax pens & e-rig chambers What’s in the Box Crossing Heated Dab Tool (Hot Knife) Protective tip cover USB-C charging cable Owner’s manual FAQs Which heat level should I use? Start on Blue for softer waxes. If the dab doesn’t release cleanly, step up to Green or Red for firmer concentrates like shatter. How do I keep the tip clean? Wipe the tip while warm with a vape-safe cleaning wipe every few sessions. Avoid scraping with metal tools. Will it work with my wax pen or e-rig? Yes—this tool is brand-agnostic. It simply helps you transfer concentrates cleanly into most chambers. Is there an auto shut-off? The quick-cycle heat runs for a short, pre-set interval. Always power off when finished and replace the cap. Safety Notes The tip gets hot—keep away from skin, fabrics, and flammables. Allow the tip to cool before capping or cleaning. Charge with a quality USB-C cable and reputable power source. Store capped, out of reach of children and pets.

Read more less

Vector Speed Single Flame Torch Lighter The Vector Speed is a compact and powerful single flame torch lighter that delivers reliable performance with smart features in a stylish design. Measuring just 3" tall, 2.5" wide, and 0.75" deep, it’s easy to carry while offering the quality Vector is known for. Key Features Angled Flame: 45° flame output for more comfortable lighting Flame Lock: Hands-free operation with simple thumb control Fuel Gauge: Transparent window shows butane level at a glance Large Adjustment Dial: Quickly fine-tune flame size from the base Stylish Finishes: Available in vibrant colour fade or matte black The intuitive thumb ignition makes the Vector Speed one of the easiest lighters to use. Just press down on the built-in safety, ignite with a push, and lock the flame on with an upward slide for continuous use. Whether you prefer the sleek matte finish or the eye-catching fade pattern, this lighter is designed to look sharp and work flawlessly. Built for portability and performance, the Vector Speed Torch Lighter is an excellent choice for anyone seeking a reliable single flame torch that’s easy to use and maintain. With Vector’s reputation for quality, you can count on it for years to come.

Read more less

Affordable and Versatile: The Mini Cartomizer for Concentrates Looking for an easy and cost-effective way to enjoy concentrates like shatter, wax, and rosin? The Mini Cartomizer is a 510-threaded concentrate atomizer that works with any standard 510-threaded battery, making it a simple yet powerful addition to any setup. What is the Mini Cartomizer? The Mini Cartomizer is a compact, inexpensive solution for vaporizing concentrates. Instead of investing in a full dab rig or a dedicated concentrate vaporizer, this 510-threaded attachment lets you transform any compatible battery into a portable concentrate system. Why Use a 510-Threaded Concentrate Atomizer? Universal Compatibility – Works with most 510-threaded batteries for ultimate flexibility. Affordable Concentrate Setup – No need to buy an expensive rig or dedicated concentrate vaporizer. Easy to Use – Simply attach it to your battery, load your concentrate, and enjoy. Compact and Portable – Take your concentrates on the go without extra bulk. How to Use the Mini Cartomizer Attach the Mini Cartomizer to your 510-threaded battery. Load a small amount of concentrate into the atomizer. Activate the battery and inhale for smooth, flavourful vapor. Who is This For? If you already own a 510-threaded battery and want a low-cost way to enjoy concentrates, the Mini Cartomizer is the perfect solution. It’s great for beginners looking to try concentrates or experienced users who want a portable, discreet option. Final Thoughts The Mini Cartomizer is one of the easiest and most affordable ways to add concentrates to your vaporizing experience. If you’re looking for a simple, efficient, and universal concentrate atomizer, this is a must-have accessory.

Read more less

Minimalist Design, Maximum Performance Discover the perfect fusion of minimalist design and exceptional performance with the Camouflet Injector. Lightweight and versatile, this injector heater is designed for use with 20mm coils powered by PID temperature controllers, or with the Camouflet Inductor induction heater (you can even use it with a big ol' torch as well). Signature Technology, Unique Power Utilizing the same cutting-edge technology developed for the Convector but applied in a larger format, the Camouflet Injector delivers a unique and powerful signature that's sure to tantalize your senses and delight your taste buds. The Injector is plenty powerful after a proper heating, don't let the small size fool you. Camouflet Injector Features: - Stainless Steel Housing: Built to last, the Camouflet Injector features a durable stainless steel housing for longevity and durability. - Patent-Pending Heater Matrix: Experience enhanced performance with the patent-pending heater matrix, ensuring rapid and consistent heating for optimal vaping sessions. - 18mm Male Attachment: Compatible with 20mm e-nail coils with 4 or 5 coil wraps, the Camouflet Injector offers versatility and convenience. - Compatible with the Inductor: Pair the Camouflet Injector with the Inductor for seamless integration, enhanced performance, and a little magic in your next session. - 3mm Threading for Handle Connection: Connect with ease using the included handle or use a custom handle, offering flexibility and customization in usage. - Tethered or Untethered Use: Enjoy the freedom to use the Camouflet Injector tethered or untethered, providing versatility to suit your preferences. A wireless/untethered Injector is the height of convenience and must be experienced for yourself to fully appreciate just how sweet it is. What's Included: - 1x Injector - 1x Handle - 1x Retention Ring

Read more less

Keep Your Utillian 5 Performing Like New The Utillian 5 is an exceptional wax and concentrate pen and we bet that you get a lot of use out of yours. Even with light use, your coil wick will need replacement at some point, and we recommend swapping in a new one when you notice that you’re not getting the full flavour experience you expect from your concentrates with the Utillian 5 Replacement Coil 2 Pack. Choose Between Kanthal and Titanium Coils The Jumbo Twisted Kanthal coil boasts a 4mm diameter, offering ample surface area for maximum vaporization of both large and small concentrate loads. Meanwhile, the Triple Titanium Coil is perfect for heavy hitters, featuring three coils for rapid heating and exceptional vapour production. Both Replacement Coil Packs come with two replacement coils.

Read more less

Camouflet Super Capacitor The Ultimate Upgrade for XL Performance The Super Capacitor is the enhanced heating powerhouse for the Convector XL and Ceramo XL. Built from pure stainless steel and packed with quadruple the thermal mass, it delivers unmatched heat retention, increased extraction, and smoother sessions — even with a torch. Key Features: 100% Stainless Steel Construction – Designed for optimal induction compatibility and long-lasting durability 4x the Thermal Mass – Retains heat far longer for extended sessions and back-to-back hits without reheating Expanded Heating Matrix – More internal plates deliver deeper, more complete extraction Compatible with Convector XL & Ceramo XL – Plug-and-play with your existing Camouflet XL gear Forgiving Heat-Up – Easier for torch users with more margin for error and longer heat windows Why Choose the Super Capacitor? This is the biggest and most capable heater in Camouflet's lineup. Whether you’re just entering the battery-free vaporizer world or looking to push your XL rig further, the Super Capacitor gives you longer sessions, more consistent vapour, and higher extraction efficiency — all with less precision required. It’s a smoother ride with much more horsepower. Heat it with any source, but for best results, we recommend pairing it with Camouflet’s Inductor. Includes: 1x Super Capacitor Compatible With: Convector XL Ceramo XL

Read more less

Volcano Balloon with Adapter The Volcano Balloon with Adapter is a convenient replacement accessory designed for the iconic Volcano Classic and Hybrid vaporizers. Whether your old bag is worn out or you're just looking for a fresh experience, this single balloon setup is the easiest way to restore top-tier performance and flavour to your device. Convenient Single-Bag Option Gone are the days of having to buy a full set. Now available individually, this single Volcano balloon is perfect for solo users or anyone who just needs one high-quality bag. It’s an ideal choice for those who want to minimize waste, save money, and keep their setup simple. Maintain Peak Flavour and Performance Over time, vapour residue builds up and can affect both taste and vapour quality. Replacing your balloon is one of the easiest and most effective ways to maintain your Volcano’s legendary performance. A fresh balloon ensures you’re getting the cleanest, most flavourful vapour possible—exactly what the Volcano is known for. Fits Volcano Classic and Hybrid This balloon is compatible with both the Volcano Classic and Volcano Hybrid models. It comes preassembled with the adapter for fast, hassle-free setup—just connect it and you’re ready to go. Key Features Includes: 1 x Volcano Balloon with Adapter Compatible with: Volcano Classic, Volcano Hybrid Preassembled for easy use Helps maintain optimal vapour quality Ideal for solo or occasional users Why Replace Your Volcano Balloon? The Volcano is one of the most respected desktop vaporizers on the market, and regular maintenance is key to keeping it running at its best. Replacing your balloon periodically ensures your vapour stays smooth, clean, and flavourful. It's a small step that makes a big difference. Get the Most Out of Your Volcano If you want to experience your dry herb the way it was meant to taste, start with a fresh balloon. This affordable single option makes it easy to stay on top of maintenance without overbuying or creating waste.

Read more less

OEM Replacement For The Tafee Bowle This set includes both tall and flat mouthpiece options, providing versatility for your Tafee Bowle 2 (or original Bowle). These are OEM (Original Equipment Manufacturer) components, ensuring the same quality and fit as the mouthpieces that come with the original device. Compatible with both the short and long stems, these mouthpieces are a perfect replacement or backup, maintaining the performance and comfort you're used to with your Tafee Bowle 2. Keep your device functioning optimally with these high-quality replacements.

Read more less

Use Concentrate With Your Tafee Bowle 2 Enhance your Tafee Bowle 2 sessions with Naturally Degummed Hemp Fibres, crafted for ultimate versatility in extract use. Each package includes two strand variations—fine and coarse—allowing you to customize your vaping experience. The fine strands are ideal for more delicate extracts, while the coarse strands offer a robust option for thicker substances. Simply place the fibres in your ceramic pot, add your favourite extract, and enjoy a smooth, flavourful vape. These fibres let you explore a broader spectrum of extracts, ensuring a tailored experience every time.

Read more less

Custom-Made for the MiniNail Flower Wand The Ed’s TNT Flower Wand Bowl is expertly designed to perfectly complement your MiniNail Flower Wand, one of our favourite ball vapes. This custom creation enhances your vaping experience by ensuring a seamless fit and superior performance. Maximum Compatibility Featuring a 14mm connection, the Ed’s TNT Flower Wand Bowl works with most water pieces, making it a versatile addition to your collection. Handcrafted Beauty from Mississippi Each Flower Wand Bowl is handmade by Ed in Mississippi, using the finest Tigerwood. This stunning wood not only adds a touch of natural elegance to your setup but also ensures that every bowl is one-of-a-kind. Thoughtful Design Details The bowl is designed with a small shelf where the Flower Wand rests, providing a 3/4” load area and a 1/2” depth. The screens are easily changeable, and extras are included to keep your setup fresh. Natural Insulation for Cooler Hits Tigerwood is a natural insulator, ensuring that these bowls don’t retain heat like metal and glass alternatives. Enjoy cool, smooth hits with this beautifully crafted accessory. Upgrade your MiniNail Flower Wand with the Ed’s TNT Flower Wand Bowl and experience the perfect blend of functionality and artistry.

Read more less

Extra Large Chill Ice Cube Tray Set The ultimate ice solution for your Chill Steel Pipe. This custom-moulded tray is designed to create the largest possible ice cubes that will still fit perfectly inside your Chill Pipe — no wasted space, no compromises. Made Specifically for Chill Steel Pipes Each tray produces seven extra-large cubes engineered to match the internal dimensions of your Chill Pipe. That means you get maximum ice volume for a longer-lasting chill — keeping your water icy cold for up to 24 hours. Why Use This Instead of Regular Ice? Perfect Fit — No jamming or melting cubes to make it work Maximum Chill — Fills the pipe with ice for extended cooling Purpose-Built — Designed for your Chill, not your cocktail A Must-Have Accessory Using regular freezer ice just doesn't cut it. With this tray, you're always ready to load up your Chill Pipe with precision-sized cubes that perform better and last longer. It’s the easiest upgrade you'll ever make. What’s Included: 1 x Extra Large Ice Cube Tray (7 cube capacity) Made from durable, food-safe silicone Upgrade your Chill experience with the ice tray designed to match it — because Chill deserves better than standard cubes.

Read more less

Ed’s TNT Venty Water Pipe Adapter – Handmade in Mississippi Ed, a true OG in the custom wood accessory game, has been crafting unique, high-end pieces for longer than just about anyone. If you're someone who appreciates premium quality, the Ed’s TNT Venty Water Pipe Adapter (WPA) is exactly what you’re looking for. Premium Craftsmanship Each piece is handmade by Ed in Mississippi, ensuring exceptional quality. Ed personally inspects everything he creates, guaranteeing a perfect fit for your Venty. This adapter couples seamlessly with a silicone shoe, letting you use your Venty with any 14mm water piece for a luxurious experience. Extra Filtration Option This WPA also includes an optional basket screen, giving you the option for additional filtration. Whether you prefer basic or high-end accessories, Ed excels at delivering premium quality with a personalized touch. Versatile Design While the main intent is to pair with the Venty, a happy accident is that it also fits in a Tinymight 2. It works perfectly as a 14mm WPA for the Tinymight 2, as long as you use the included basket screen, offering unexpected versatility to this piece. Gorgeous Cocobolo Wood Crafted from stunning cocobolo wood, each adapter is completely unique. Since no two pieces of wood are alike, you’re guaranteed a one-of-a-kind piece that’s as visually striking as it is functional. This is another great accessory from Ed, and it showcases the skill and attention to detail he’s become known for over the years.

Read more less

Purpose-Built Design The Potter is the ultimate grinder for the Tafee Bowle 2, designed to streamline your sessions by preloading your ceramic pots. Efficient Pot Loading Grind your herb like a normal grinder, and as you do, it fills four ceramic pots, making it incredibly easy to switch out a new one. No extra steps, just perfectly preloaded pots ready for use. High-Quality Materials Available in grey or green, The Potter is made from durable metal, a superior upgrade from the plastic grinder included with the system. Includes 4 Ceramic Pots With each grinder, you get four ceramic pots, perfect for ensuring seamless vaping sessions. Ideal for users invested in the Tafee system.

Read more less

Tornado Full Rig – Dry-Use Power, Water-Ready Flex Same Tornado engine, now ready to rip dry right out of the box – and still compatible with water through our Master Adapter. Why choose the Full Rig? The original Tornado is designed for water-piece sessions. The Tornado Full Rig gives you the same CopperCore performance and secondary atomizer technology but includes a native stem so you can enjoy it dry immediately. Want the cooling comfort of water? Pair it with our Master Adapter and your favourite rig. Key Highlights Secondary atomizer: breaks down vapour into an ultra-fine mist for smoother hits and improved bioavailability. Patented CopperCore: fast, precise heating with torch or induction heater. Dry-use ready: ships with a Tornado stem for immediate dry sessions. TXL Bowl capacity: ~0.3 g with a medium grind; designed for a loose pack to maximize convection airflow. Medical-grade build: internal steel layer with magnetic outer casing for reliable heating. Customizable airflow: regulate naturally with your breath or adjust via compatible stems. What’s in the Box Tornado Oven (Full Rig) Tornado TXL Herb Chamber Tornado Stem (dry-use) Stainless steel screen How It Works Load the TXL Bowl with a loose medium grind. Heat with a torch or induction heater, then draw steadily for full convection + atomization. Want water filtration? Swap to your favourite rig using the Master Adapter. Fit & Compatibility Not compatible with USA 8 mm or Integrated stems; Tornado’s connector is shorter and fit will be loose. TXL Bowls are 55% larger than ThermoCore XL and do not fit ThermoCORE/DuraCORE ovens. Uses the same screen as Anvil-series parts; O-ring kits match Integrated-stem kits where applicable. Care Notes & Cautions Always insert threaded bowls into a cool oven. Tighten snug, then back off 1/16 turn to prevent binding. Units are crafted in small batches; slight variations are normal. Temperature-sensing chambers are not cold-start compatible (may cause thermal lock). Specs at a Glance Heating: CopperCore hybrid with secondary atomizer Heat Source: Torch or FORGE induction heater Chamber: TXL (~0.3 g, loose pack recommended) Materials: Medical-grade steel interior; magnetic outer casing Use Modes: Dry out of the box; water-ready with Master Adapter FAQ What’s the difference between the Tornado and the Tornado Full Rig? The Full Rig includes a native stem for dry use. The standard Tornado is designed for water-only setups. Both share the same CopperCore engine and secondary atomizer. Can I heat it with induction? Yes. The FORGE induction heater is tuned for Tornado performance, and torch heating works equally well. How much does the TXL Bowl hold? Approximately 0.3 g with a medium grind. A loose pack always delivers the best results. Is it compatible with USA or Integrated stems? No. The Tornado’s connector is shorter and does not support a proper seal with those stems.  

Read more less

The Triple Play Pipe – A Classic Shape With a Functional Twist Meet the Triple Play Pipe: a familiar favourite reimagined with a subtle yet powerful design upgrade. This is the kind of water pipe that feels instantly familiar — but delivers more flavour, more cooling, and more compatibility with your favourite setups. Whether you’re using a vaporizer with a 14mm water pipe adapter or just love the smooth chug of a great piece, this one’s built for performance. 🔹 Classic Bong Shape – Modern Function Standing at a compact 10 inches tall, the Triple Play Pipe sports a time-tested silhouette: a broad cone-shaped base for water volume, leading up to a slightly flared comfort-fit mouthpiece. Not too big, not too tight — just right for easy draws and flavour-packed sessions. 🔹 Built for Vaporizers and Adapters This pipe features an 18mm joint with a 14mm downstem, giving you broad compatibility across most 14mm water pipe adapters used in the vaporizer world. If your vape has a WPA, chances are this piece is plug-and-play. 🔹 The Iconic Chug – With Airflow Upgrades At the base of the removable downstem, you’ll find a 6-slit classic tube percolator — a tried-and-true design that gives you that deep, familiar bong rumble with a touch of extra airflow. The added side slits help open up the pull, balancing backpressure with satisfying diffusion. 🔹 Triple Chamber Splash Protection What sets the Triple Play Pipe apart is its upper section. Nestled between the water reservoir and the mouthpiece is a visually striking triple-glass splash catcher. This triple-tiered structure doesn’t just look cool — it actively reduces water splashback, keeping your lips dry and your session clean. It’s a rare blend of form and function in one smooth piece. 🔹 Designed for Ball Vapes – But Great With Any Setup If you’re using a ball vape or another high-performance desktop vaporizer, you’ll appreciate the cooling capacity here. The large base holds enough water for heat dissipation, while the airflow and percolation aren’t so intense that they mute flavour. It’s the sweet spot between smooth and tasty. 📦 Features at a Glance: Height: 10” tall Joint: 18mm female with included 14mm downstem Percolator: Classic tube-style with 6 diffusion slits Unique triple-glass splash catcher section Cone-style base holds solid water volume for cooling Comfort-fit mouthpiece Compatible with 14mm water pipe adapters Ideal for use with vaporizers 🚀 Final Thoughts The Triple Play Pipe is exactly what it sounds like — a three-way win: iconic design, vaporizer compatibility, and standout splash control. Whether you’re upgrading your setup or adding a new daily driver to your rotation, this piece delivers classic function with a premium touch.

Read more less

Light Years Ahead of the Original Focus V pioneers the forefront of technology with a futuristic smart rig tailored for tomorrow. Introducing the CARTA 2, featuring an enhanced atomizer boasting a 360° heating element and optimized airflow for an unparalleled dabbing experience.  Bright, Easy & Vibrant Interface Keep track of every detail in real-time with the vibrant OLED screen. Take full control with the newly revamped mobile app, offering responsiveness and a sleek, intuitive interface. Transform your sessions with a fully customizable light show, courtesy of adjustable RGB LEDs that can flash, pulse, and glow at your command. Stay ahead of the curve with OTA technology, enabling easy software updates and endless customization possibilities, unlocking a future of potential for your CARTA 2! Unlock the Potential with the App The fully redesigned app places control in your hands. Offering a wealth of options for user configuration, it opens doors to endless customization possibilities. Dive into a realm where you shape your experience to perfection. With integrated social and community trackers alongside a suite of tools, the app enhances your journey and connects you with fellow enthusiasts, amplifying your experience in a unique way. Or - Do It on the Device Conveniently placed tactile buttons integrated into the device's ergonomic base offer seamless time and temperature adjustments on the go. With a simple touch, you can tweak your settings in an instant, eliminating the need for an app. Whether it's fine-tuning your session on device or adjusting LED settings using the app, control is always at your fingertips with the Focus V Carta 2.

Read more less

Keep Your Vapman Running Like New Revitalize your Vapman and keep it like new with the all-inclusive Restore Kit. Crafted with precision, it includes springs, screws, filter, and a convenient screwdriver for effortless maintenance - it’s truly everything you need for a full day at the spa for your Vapman. Experience a rejuvenated vaping journey and a fresh new Vapman with enhanced performance and convenience.

Read more less

DynaVap HyperDyn TygerDyn: Titanium Big Bowl Dry Herb Vaporizer DynaVap HyperDyn – TygerDyn Introducing the TygerDyn HyperDyn, a bold new release with a striped DuraDyn finish that is as durable as it is striking. Built from medical-grade titanium and engineered for serious sessions, this is the first Big Bowl vaporizer from DynaVap — designed to deliver heavy hits, extended sessions, and adjustable control in the palm of your hand. Who is the HyperDyn for? The HyperDyn is made for connoisseurs who want a “session style” thermal extraction — bigger rips, longer bowls, and precision control without batteries. Key Benefits Massive rips & extended sessions: 0.25 g chamber capacity pushes extractions further before reloads. Durability you can feel: Fully machined titanium construction with scratch-resistant DuraDyn finish. Flavour focused: Clean thermal extraction brings terpene-rich vapour without combustion. Water piece ready: Built-in 10 mm and 14 mm tapers for easy bong integration. Battery-free design: No electronics, no charging. Heat with a torch or induction heater anywhere. Discreet & modular: Pocket-sized and compatible with previous DynaVap midsections, tips, and mouthpieces. HyperDyn Features Bigger tip chamber/bowl (~0.25 g) for session-length extractions Clean, durable look with DynaVap’s DuraDyn striped TygerDyn finish Hardened titanium build for lifetime performance Dual taper (10 mm / 14 mm) for water piece fitment Modular compatibility with legacy DynaVap parts (except Hyper Cap ↔ Hyper Tip is unique) Ergonomic stem with easy airport access Precision-machined Hyper Cap with consistent Captive Cap click technology Seven adjustable airflow settings via condenser depth control How to Use the HyperDyn Remove the Hyper Cap and load ground herb into the titanium Tip chamber. Re-attach the Cap, then heat evenly with a torch or induction heater until it clicks. Inhale through the mouthpiece. A second click signals cooldown. Reheat for more extraction, or save AVB (already vaped bud) for later uses. Parts & Build Hyper Cap – TygerDyn Titanium Hyper Tip – TygerDyn Titanium Stem – TygerDyn Titanium Condenser Assembly with Mouthpiece Titanium CCD (screen) High-temp O-rings (4 total) Also Includes DynaVap Hyper Dosing Capsule (~0.125 g capacity, fits Hyper Tip; also sold in 5-packs) DynaVap Tin Case Accessory Compatibility The Wand with Adaptor DynaStash XL SlimStash XL SlingStash (with storage cup removed) Specs Bowl size ~0.25 g (Hyper Tip chamber) Material Medical-grade titanium Finish DuraDyn TygerDyn striped pattern Heat source Butane torch or induction heater Tapers 10 mm & 14 mm Airflow settings 7 adjustable positions via condenser depth

Read more less

DynaVap M7 TwoToniuM Meet TwoToniuM — the first two-tone Fall colour from DynaVap. With a sharp, dark-to-light contrast and all the performance of the latest M 7, this eye-catching, pocket-friendly device is built for flavour, efficiency, and total portability — no batteries required. Available in limited supply. Why you’ll love the M7 TwoToniuM Battery-free freedom: Heat with a butane torch or induction heater and enjoy anywhere, anytime. Durable by design: Medical-grade stainless steel, made in the USA. Flavour first: Thermal extraction unlocks terpene-rich vapour and clean taste. Use less, get more: Stretch your herb — many users report using >50% less material with excellent results. Discreet & modular: Palm-sized, pocket-ready, and compatible with DynaVap accessories. Who is the M7 for? Anyone who wants an exceptional dry herb experience — from microdosing to complete extractions — without electronics. M7 feature highlights Bigger rips & heat retention: A higher-mass tip and chamber for stronger, more controlled extractions. Finless tip, cooler fingers: Up to 20% less heat transfer from tip to stem. Even extractions: Refined mass distribution reduces scorching and hot spots. More airflow: Redesigned captive cap fitment + increased convection vs previous M models. Simple airflow control: New airport with “Pivot”-style rocker for on-the-fly tuning. Microdose-ready: “Adjust-a-bowl” halves the chamber size in seconds. Streamlined grip: Textured stem pattern for secure handling and a fresh look. Captive Cap “click”: Audible temperature cue for consistent, user-controlled sessions. How to use the M7 TwoToniuM Remove the Cap and load ground dry herb into the Tip chamber. Re-cap, then heat the Cap (not the stem) with a torch or induction heater until it clicks (about 5–7 seconds). Inhale from the mouthpiece. When the Cap clicks again, it has cooled. Re-heat for further extraction, or save your AVB for later uses. Tip: Cover or feather the airport to fine-tune vapour density and temperature draw-by-draw. Parts & build DynaVap Captive Cap Stainless Steel Tip: M 7 — TwoToniuM Stainless Steel Stem: M 7 — TwoToniuM Stainless Steel CCD (screen) High-temp O-rings (2) Stainless Steel Condenser + O-rings (2) What’s in the box DynaVap Tin Case DynaTorch (single flame / empty) Pink Slip Specs Bowl size ~0.1 g (adjust-a-bowl compatible) Material Medical-grade stainless steel Heat source Butane torch or induction heater (sold separately) Design Two-tone “TwoToniuM” finish; finless M7 tip; textured stem FAQ Is the M7 TwoToniuM good for microdosing? Yes. Use the adjust-a-bowl to reduce the chamber by half for efficient micro-loads. What’s the best heat source? It works with virtually any flame, but a quality butane torch or an induction heater delivers the best flavour and consistency. How do I control vapour? Feather the airport and experiment with heat placement/rotation on the Cap. The Captive Cap’s click gives a repeatable temperature cue.

Read more less

Vector Mystique Single Flame Torch Lighter The Vector Mystique pairs a sleek, vertical profile with one of the most comfortable ignition systems we’ve used. At 3.37" tall, 0.78" wide, and 0.94" deep, it’s slim, pocket-friendly, and built from metal for everyday durability. Key Features Side-Lever Ignition: Low-effort, natural thumb press to ignite and hold the flame Ultra-Slim Vertical Design: Tall, narrow body for easy everyday carry Large Flame Dial: Oversized adjuster at the base—turn with thumb and finger (no tool needed) Metal Construction: Solid feel and long-lasting durability Stylish Finishes: Metallic blue or gunmetal satin The side-lever ignition is the star here: press the small metal lever that rests flush against the body to fire the torch, then keep it comfortably depressed as long as you need. Because you’re holding a lever—not pushing in or flicking sideways—it’s exceptionally easy on the thumb and a great choice for anyone with mobility or grip issues. With its slim profile, simple operation, and large, easy-to-use flame adjustment, the Vector Mystique is an outstanding everyday carry torch lighter that blends comfort, style, and performance.

Read more less

Vector Stratos Single Flame Torch Lighter The Vector Stratos is a single flame torch lighter that stands out with its bold steampunk-inspired design and durable metal build. Compact at 2.87" tall, 1.30" wide, and 0.73" deep, it blends eye-catching style with practical performance. Key Features Steampunk Aesthetic: Unique industrial design with tactile controls Protective Jet Cover: Prevents dust and debris from entering the flame jet One-Press Ignition: Single button both opens the cover and ignites the flame Metal Construction: Built to last with premium textured or glossy finishes Adjustable Flame: Screwdriver-friendly control at the base Unlike most lighters with exposed jets, the Stratos features a built-in protective cover that flips open as you ignite, keeping the torch clear and ready to use. The push-down ignition is highly tactile — one smooth press opens the cover and sparks the torch, making it feel as satisfying as it is functional. Available in a textured matte black finish or a glossy sparkle burgundy reminiscent of a sports car, the Vector Stratos delivers both style and substance for anyone who wants their everyday carry lighter to stand out.

Read more less

Dr. Dabber Drop – The Heated Loading Tool Reimagined The Dr. Dabber Drop is the long-awaited evolution of the original heated loading tool—the iconic Budder Cutter, first released in 2014. Redesigned from the ground up, this next-generation tool makes loading sticky, hard-to-manage waxes and oils into your eRig, banger, or pen faster, cleaner, and more efficient than ever. The Successor to a Game-Changer This is more than just an update. The Dr. Dabber Drop is a complete reimagining of one of the most innovative concentrate tools ever created. With a sleeker design, better performance, and enhanced versatility, it delivers everything you loved about the original—plus a whole lot more. Multi-Use Compatibility Whether you’re using an electric dab rig, a traditional setup, or a vape pen, the Dr. Dabber Drop fits seamlessly into your routine. It’s the ideal solution for anyone tired of messy loading or wasting concentrates on sticky tools that just don’t work. Calibrated Heating That Won’t Waste Your Concentrates The Drop features a carefully calibrated heating element that delivers just the right amount of heat—enough to handle sticky extracts, but not enough to burn or vaporize your valuable concentrates. It heats up quickly and maintains a stable temperature throughout use. Two Heat Settings for Total Control With dual heat settings, the Dr. Dabber Drop gives you the flexibility to handle any concentrate type with confidence. Toggle between heat levels depending on the thickness or consistency of your wax or oil. Designed for Everyday Convenience It’s not just functional—it’s smart. The Dr. Dabber Drop features a magnetic cap that attaches to the back of the unit while in use, so you never lose it. And with USB-C charging (cable included), it’s always ready when you are. Features At a Glance Next-gen heated loading tool for concentrates Successor to the original Budder Cutter (2014) Works with eRigs, bangers, and vape pens Prevents waste—doesn’t burn or vaporize concentrates Dual heat settings for different concentrate types Magnetic cap and USB-C charging included

Read more less

VapVana The Natural Kit — All-Glass Ball Vape System The Natural Kit from VapVana represents the pinnacle of purity and performance in desktop vaporization. Featuring an all-glass, metal-free design crafted entirely from quartz and sapphire, it delivers a flawless, flavour-rich experience that defines what a true connoisseur-grade system can be. Sorry, your browser doesn’t support embedded videos. Overview The VapVana The Natural Kit sets a new benchmark for clean, all-glass thermal extraction. With a 100% quartz and sapphire heating engine, this revolutionary system eliminates metal entirely from the airpath for unmatched purity and true-to-flower flavour. Built as a complete connoisseur-grade setup, The Natural is ready for dry herb or concentrates straight out of the box. Key Features All-Glass Heating System: Constructed entirely from quartz and sapphire for a completely metal-free vapour path. Complete Desktop Kit: Includes every essential component for both dry herb and concentrate sessions. Precision PID Controller: Adjust your temperature with exact control for consistent results. Dual-Use Capability: Includes a full quartz banger setup for concentrate compatibility. Custom Wooden Dugout Dock: Organizes your heater, controller, and tools in one elegant base. 20 mm Coil + Stand: Provides rapid, stable heat with secure storage between sessions. What’s Included 1 × The Natural Heater – Quartz Injector with ~205 Sapphire Pearls and Quartz Handle 1 × All-Glass Backstop Bowl – 10 mm Adapter and Dry Catch 1 × PID Temperature Controller 1 × Power Cable (110V North America) 1 × Solid Wooden Dugout Dock 1 × 20 mm Hot Hole Coil 1 × Heater Stand Post with Glass Insert 1 × Quartz Banger Set – Auto Spinner with 8 mm Pearl and Marble Cap 1 × Scoop and Brush Tool Set Performance & Design Every component of The Natural Kit is designed for purity, precision, and effortless performance. The 205 sapphire pearls inside the quartz injector retain and distribute heat evenly across your material, producing smooth, flavour-forward vapour with no metallic interference. The glass-on-glass bowl and injector pairing ensures a frictionless seal and minimal draw resistance. The included PID controller provides consistent, precise temperature management. The 20 mm coil reaches full temperature rapidly and maintains stability across extended sessions, while the wooden dock keeps everything organized and safe between uses. Why Choose The Natural Kit? For enthusiasts who demand the cleanest possible flavour and performance, The Natural Kit offers a truly uncompromised experience. With zero metal in the vapour path, every session delivers the essence of your material — nothing more, nothing less. This kit is ideal for connoisseurs, collectors, and anyone who values design simplicity paired with advanced thermal engineering. Read our full review of the VapVana Natural here. Specifications Materials: 100% Quartz + Sapphire (no metal) Heating Type: Convection Compatibility: Dry Herb & Concentrates Coil Size: 20 mm Controller: Digital PID with Adjustable Temperature Power: 110V (North America) Bonus: Basic Glass Injector Bowl (early orders) Final Thoughts The VapVana The Natural Kit stands alone as the world’s first all-glass, sapphire-enhanced ball vape system. Combining cutting-edge design with flawless execution, it offers unparalleled purity and performance for users who won’t settle for less. From dry herb to concentrates, it’s the definition of clean power and refined engineering.

Read more less

Ceramo XL – The Pinnacle of Battery-Free Convection Welcome to a new standard in dry herb vaporization. The Ceramo XL is a precision-engineered convection device built for purists who value clean flavour, efficient extraction, and rock-solid durability. It’s designed to outperform traditional vaporizers — all without batteries or electronics. One-Piece Zirconia Construction The Ceramo XL is machined from a solid block of black zirconia — a tough, heat-resistant ceramic known for its stability and neutral flavour. Its friction-fit screen and no-o-ring design reduces maintenance and keeps performance consistent session after session. Designed for Performance, Built to Last Ceramic Airpath – Smooth airflow with minimal heat soak or flavour distortion Ultra-High-Flow (UHF) Stem – Built for strong, easy draws and fast clearing Heater Plate Matrix – Optimized for deep, even convection extraction 0.2g Chamber Capacity – Wide and shallow for easy loading and quick clearing 14mm Male Taper – Compatible with your favourite glass pieces Replaceable Metal Screen – Friction-fit for easy cleaning or swapping How to Use the Ceramo XL Loosely fill the chamber with a medium grind of dry herb. Place the XL Camo Cap onto the heater end of the device. Apply heat to the tip using a torch or the Inductor. Heat for 4–7 seconds (Inductor) or 7–15 seconds (torch). Inhale gently from the stem. Rotate and reheat for 2–3 cycles to fully extract your material. What’s Included 1 x Ceramo XL (Black Zirconia) 1 x XL Camo Cap 1 x Replaceable Metal Chamber Screen 1 x Bambox Storage Case 1 x Burner Torch Lighter 1 x Cap Adjustment Tool Inspired by the Convector XL The Ceramo XL expands on the proven design of the Convector XL, delivering even greater airflow, upgraded materials, and a simplified, o-ring-free structure. It retains the trusted heater matrix and 14mm taper while pushing flavour and form to the next level. Why Choose Ceramo XL? Ceramic Airpath – Smooth flavour and high heat resistance Low Maintenance – No o-rings or fragile seals Fast Extraction – Full sessions in 2–3 heat cycles Glass Ready – 14mm taper fits water pieces right out of the box If you’re ready for high-performance convection without batteries or complexity, the Ceramo XL is your next move.

Read more less