All Vaporizer Brands

Tornado Full Rig – Dry-Use Power, Water-Ready Flex Same Tornado engine, now ready to rip dry right out of the box – and still compatible with water through our Master Adapter. Why choose the Full Rig? The original Tornado is designed for water-piece sessions. The Tornado Full Rig gives you the same CopperCore performance and secondary atomizer technology but includes a native stem so you can enjoy it dry immediately. Want the cooling comfort of water? Pair it with our Master Adapter and your favourite rig. Key Highlights Secondary atomizer: breaks down vapour into an ultra-fine mist for smoother hits and improved bioavailability. Patented CopperCore: fast, precise heating with torch or induction heater. Dry-use ready: ships with a Tornado stem for immediate dry sessions. TXL Bowl capacity: ~0.3 g with a medium grind; designed for a loose pack to maximize convection airflow. Medical-grade build: internal steel layer with magnetic outer casing for reliable heating. Customizable airflow: regulate naturally with your breath or adjust via compatible stems. What’s in the Box Tornado Oven (Full Rig) Tornado TXL Herb Chamber Tornado Stem (dry-use) Stainless steel screen How It Works Load the TXL Bowl with a loose medium grind. Heat with a torch or induction heater, then draw steadily for full convection + atomization. Want water filtration? Swap to your favourite rig using the Master Adapter. Fit & Compatibility Not compatible with USA 8 mm or Integrated stems; Tornado’s connector is shorter and fit will be loose. TXL Bowls are 55% larger than ThermoCore XL and do not fit ThermoCORE/DuraCORE ovens. Uses the same screen as Anvil-series parts; O-ring kits match Integrated-stem kits where applicable. Care Notes & Cautions Always insert threaded bowls into a cool oven. Tighten snug, then back off 1/16 turn to prevent binding. Units are crafted in small batches; slight variations are normal. Temperature-sensing chambers are not cold-start compatible (may cause thermal lock). Specs at a Glance Heating: CopperCore hybrid with secondary atomizer Heat Source: Torch or FORGE induction heater Chamber: TXL (~0.3 g, loose pack recommended) Materials: Medical-grade steel interior; magnetic outer casing Use Modes: Dry out of the box; water-ready with Master Adapter FAQ What’s the difference between the Tornado and the Tornado Full Rig? The Full Rig includes a native stem for dry use. The standard Tornado is designed for water-only setups. Both share the same CopperCore engine and secondary atomizer. Can I heat it with induction? Yes. The FORGE induction heater is tuned for Tornado performance, and torch heating works equally well. How much does the TXL Bowl hold? Approximately 0.3 g with a medium grind. A loose pack always delivers the best results. Is it compatible with USA or Integrated stems? No. The Tornado’s connector is shorter and does not support a proper seal with those stems.  

Read more less

DynaVap HyperDyn TygerDyn: Titanium Big Bowl Dry Herb Vaporizer DynaVap HyperDyn – TygerDyn Introducing the TygerDyn HyperDyn, a bold new release with a striped DuraDyn finish that is as durable as it is striking. Built from medical-grade titanium and engineered for serious sessions, this is the first Big Bowl vaporizer from DynaVap — designed to deliver heavy hits, extended sessions, and adjustable control in the palm of your hand. Who is the HyperDyn for? The HyperDyn is made for connoisseurs who want a “session style” thermal extraction — bigger rips, longer bowls, and precision control without batteries. Key Benefits Massive rips & extended sessions: 0.25 g chamber capacity pushes extractions further before reloads. Durability you can feel: Fully machined titanium construction with scratch-resistant DuraDyn finish. Flavour focused: Clean thermal extraction brings terpene-rich vapour without combustion. Water piece ready: Built-in 10 mm and 14 mm tapers for easy bong integration. Battery-free design: No electronics, no charging. Heat with a torch or induction heater anywhere. Discreet & modular: Pocket-sized and compatible with previous DynaVap midsections, tips, and mouthpieces. HyperDyn Features Bigger tip chamber/bowl (~0.25 g) for session-length extractions Clean, durable look with DynaVap’s DuraDyn striped TygerDyn finish Hardened titanium build for lifetime performance Dual taper (10 mm / 14 mm) for water piece fitment Modular compatibility with legacy DynaVap parts (except Hyper Cap ↔ Hyper Tip is unique) Ergonomic stem with easy airport access Precision-machined Hyper Cap with consistent Captive Cap click technology Seven adjustable airflow settings via condenser depth control How to Use the HyperDyn Remove the Hyper Cap and load ground herb into the titanium Tip chamber. Re-attach the Cap, then heat evenly with a torch or induction heater until it clicks. Inhale through the mouthpiece. A second click signals cooldown. Reheat for more extraction, or save AVB (already vaped bud) for later uses. Parts & Build Hyper Cap – TygerDyn Titanium Hyper Tip – TygerDyn Titanium Stem – TygerDyn Titanium Condenser Assembly with Mouthpiece Titanium CCD (screen) High-temp O-rings (4 total) Also Includes DynaVap Hyper Dosing Capsule (~0.125 g capacity, fits Hyper Tip; also sold in 5-packs) DynaVap Tin Case Accessory Compatibility The Wand with Adaptor DynaStash XL SlimStash XL SlingStash (with storage cup removed) Specs Bowl size ~0.25 g (Hyper Tip chamber) Material Medical-grade titanium Finish DuraDyn TygerDyn striped pattern Heat source Butane torch or induction heater Tapers 10 mm & 14 mm Airflow settings 7 adjustable positions via condenser depth

Read more less

DynaVap M7 TwoToniuM Meet TwoToniuM — the first two-tone Fall colour from DynaVap. With a sharp, dark-to-light contrast and all the performance of the latest M 7, this eye-catching, pocket-friendly device is built for flavour, efficiency, and total portability — no batteries required. Available in limited supply. Why you’ll love the M7 TwoToniuM Battery-free freedom: Heat with a butane torch or induction heater and enjoy anywhere, anytime. Durable by design: Medical-grade stainless steel, made in the USA. Flavour first: Thermal extraction unlocks terpene-rich vapour and clean taste. Use less, get more: Stretch your herb — many users report using >50% less material with excellent results. Discreet & modular: Palm-sized, pocket-ready, and compatible with DynaVap accessories. Who is the M7 for? Anyone who wants an exceptional dry herb experience — from microdosing to complete extractions — without electronics. M7 feature highlights Bigger rips & heat retention: A higher-mass tip and chamber for stronger, more controlled extractions. Finless tip, cooler fingers: Up to 20% less heat transfer from tip to stem. Even extractions: Refined mass distribution reduces scorching and hot spots. More airflow: Redesigned captive cap fitment + increased convection vs previous M models. Simple airflow control: New airport with “Pivot”-style rocker for on-the-fly tuning. Microdose-ready: “Adjust-a-bowl” halves the chamber size in seconds. Streamlined grip: Textured stem pattern for secure handling and a fresh look. Captive Cap “click”: Audible temperature cue for consistent, user-controlled sessions. How to use the M7 TwoToniuM Remove the Cap and load ground dry herb into the Tip chamber. Re-cap, then heat the Cap (not the stem) with a torch or induction heater until it clicks (about 5–7 seconds). Inhale from the mouthpiece. When the Cap clicks again, it has cooled. Re-heat for further extraction, or save your AVB for later uses. Tip: Cover or feather the airport to fine-tune vapour density and temperature draw-by-draw. Parts & build DynaVap Captive Cap Stainless Steel Tip: M 7 — TwoToniuM Stainless Steel Stem: M 7 — TwoToniuM Stainless Steel CCD (screen) High-temp O-rings (2) Stainless Steel Condenser + O-rings (2) What’s in the box DynaVap Tin Case DynaTorch (single flame / empty) Pink Slip Specs Bowl size ~0.1 g (adjust-a-bowl compatible) Material Medical-grade stainless steel Heat source Butane torch or induction heater (sold separately) Design Two-tone “TwoToniuM” finish; finless M7 tip; textured stem FAQ Is the M7 TwoToniuM good for microdosing? Yes. Use the adjust-a-bowl to reduce the chamber by half for efficient micro-loads. What’s the best heat source? It works with virtually any flame, but a quality butane torch or an induction heater delivers the best flavour and consistency. How do I control vapour? Feather the airport and experiment with heat placement/rotation on the Cap. The Captive Cap’s click gives a repeatable temperature cue.

Read more less

Crossing Heated Dab Tool (Hot Knife) Load clean. Drop clean. No mess. The Crossing Heated Dab Tool is the easy way to load sticky concentrates into your wax pen or e-rig without scraping the sides of the bowl. A ceramic hot-knife tip, three voltage levels, and simple one-button controls let you warm and release your dab with precision. It’s compact, USB-C rechargeable, and comes with a protective cap for pocket-safe carry. Key Features Heated ceramic tip for smooth, mess-free loading 3 voltages (Blue / Green / Red) to match different concentrate textures Two heat modes: quick cycle (double-click) or manual hold USB-C charging with included cable Protective cover cap for safe storage 550 mAh battery for plenty of reloads between charges One-button operation—fast to learn, easy to use Why You’ll Like It Less mess: Warm the tip and your dab slides cleanly into the chamber—no more hard scraping. Better control: Choose a lower level for softer waxes or higher for firmer concentrates like shatter. Pocket-friendly: Lightweight, capped, and ready to travel. How to Use the Crossing Heated Dab Tool Remove the glass/plastic cap. Power on: Press the button 5× to turn on (repeat to turn off). Select voltage: Press 3× to cycle Blue → Green → Red. Heat the tip: Quick cycle: Press 2× to start a short auto heat. Manual: Press & hold to heat while you load. Scoop your concentrate, hover over the chamber, then warm the tip—after a few seconds the dab will slide off cleanly. Replace the cap when finished and power off. Tip: Use Blue/low for most waxes; bump to Red/high for firmer textures. Battery & Charging The integrated 550 mAh battery delivers many reloads per charge. Top up with the included USB-C cable. As with any small device, actual run-time will vary by heat level and usage. Easy Cleaning While the tip is still warm (not red-hot), wipe it with a vape-safe cleaning wipe to remove residue. Keep the protective cap on during storage to extend tip life and prevent debris. Specifications Tip Ceramic heated “hot-knife” style Heat Levels 3 voltages (Blue / Green / Red) Controls 1 button • 5× power • 3× level • 2× cycle • hold to heat Battery 550 mAh (integrated) Charging USB-C Cap Included protective cover Use Case Loading wax pens & e-rig chambers What’s in the Box Crossing Heated Dab Tool (Hot Knife) Protective tip cover USB-C charging cable Owner’s manual FAQs Which heat level should I use? Start on Blue for softer waxes. If the dab doesn’t release cleanly, step up to Green or Red for firmer concentrates like shatter. How do I keep the tip clean? Wipe the tip while warm with a vape-safe cleaning wipe every few sessions. Avoid scraping with metal tools. Will it work with my wax pen or e-rig? Yes—this tool is brand-agnostic. It simply helps you transfer concentrates cleanly into most chambers. Is there an auto shut-off? The quick-cycle heat runs for a short, pre-set interval. Always power off when finished and replace the cap. Safety Notes The tip gets hot—keep away from skin, fabrics, and flammables. Allow the tip to cool before capping or cleaning. Charge with a quality USB-C cable and reputable power source. Store capped, out of reach of children and pets.

Read more less

Ruby Twist Injector Vaporizer Kit – Titanium Ball Vape with Ruby Core The Ruby Twist Injector is a next-generation ball vape thermal injector designed for massive heat retention, smooth airflow, and incredibly efficient extractions. Built from durable titanium and filled with ~230 gem-cut ruby pearls, this desktop powerhouse delivers stable heat, huge clouds, and the kind of performance usually reserved for much more expensive injectors. Why the Ruby Twist Stands Out Twisting Airflow Design: A vortex-style intake path spirals the output air, maximizing contact for consistent vaporization and richer flavour. 230 Ruby Thermal Mass: Gem-cut ruby holds and radiates heat evenly, preventing hot spots and allowing powerful, repeatable hits back-to-back. Titanium Housing: Lightweight yet strong, the titanium injector ensures quick responsiveness and durability. Fast Heat-Up: Reaches operating temp in mere minutes thanks to the 20 mm coil and precision PID controller. Low Maintenance: Easy to clean, simple design—no moving parts, no hassle. Complete Kit – Everything You Need Ruby Twist Injector Core (titanium housing with ~230 ruby media) Crossing Tech PID Controller (digital screen, auto shutoff, °F/°C toggle) 20 mm Heater Coil with handle Coil Heat Guard for safe operation Adjustable Microdose Diffuser Chamber (pass-through design, compatible with small or large loads) 14 mm → 19 mm Glass Adapter Coil Stand to safely rest the hot injector Herb Scoop & Wood Brush for easy prep and cleaning Note: Water pieces/bubblers are sold separately, but the kit works with 14mm and 18mm glass. Technical Specifications PID Controller Power: up to 150 W Voltage: 120 V standard (auto-switches for 220 V when paired with 220 V coil) Temperature Range: 220°F – 990°F Connector: 5-pin XLR Controller Size: 72 × 36 × 108 mm (2.83 × 1.42 × 4.25 in) Weight: ~0.8 kg Heat-Up Time: ~45 seconds How It Works Plug the titanium Ruby Twist injector into the PID and place it in the heat stand. Set your target temperature on the PID (typical range 270–330°C / 518–626°F for efficient vaporization). Load your herb into the microdose diffuser or compatible bowl. Place the injector on top of the bowl and draw steadily. The twisting airflow ensures even heating without stirring. Return the injector to the coil stand between hits. Safety & Care Do not preheat the injector while seated in glass; thermal expansion can damage the bowl. Always use the included stand when the injector is hot. Keep loose sleeves, hair etc. clear of the coil and injector. Clean glass with ISO, rinse and dry thoroughly before use. Who It’s For Ball vape enthusiasts seeking premium performance at an unbeatable value. Users who want consistent results with low-temp efficiency or high-temp extraction power. Everyday desktop users looking for simple, reliable, and hard-hitting design. Why Choose the Ruby Twist? With its titanium housing, massive ruby thermal core, and twisting airflow, the Ruby Twist Injector is one of the most efficient and powerful ball vapes available today. It outperforms many pricier competitors by delivering smoother, denser vapour at lower temps—all while staying simple to set up and easy to maintain. If you want serious desktop performance in a complete kit, this is it.

Read more less

Vector Mystique Single Flame Torch Lighter The Vector Mystique pairs a sleek, vertical profile with one of the most comfortable ignition systems we’ve used. At 3.37" tall, 0.78" wide, and 0.94" deep, it’s slim, pocket-friendly, and built from metal for everyday durability. Key Features Side-Lever Ignition: Low-effort, natural thumb press to ignite and hold the flame Ultra-Slim Vertical Design: Tall, narrow body for easy everyday carry Large Flame Dial: Oversized adjuster at the base—turn with thumb and finger (no tool needed) Metal Construction: Solid feel and long-lasting durability Stylish Finishes: Metallic blue or gunmetal satin The side-lever ignition is the star here: press the small metal lever that rests flush against the body to fire the torch, then keep it comfortably depressed as long as you need. Because you’re holding a lever—not pushing in or flicking sideways—it’s exceptionally easy on the thumb and a great choice for anyone with mobility or grip issues. With its slim profile, simple operation, and large, easy-to-use flame adjustment, the Vector Mystique is an outstanding everyday carry torch lighter that blends comfort, style, and performance.

Read more less

Vector Stratos Single Flame Torch Lighter The Vector Stratos is a single flame torch lighter that stands out with its bold steampunk-inspired design and durable metal build. Compact at 2.87" tall, 1.30" wide, and 0.73" deep, it blends eye-catching style with practical performance. Key Features Steampunk Aesthetic: Unique industrial design with tactile controls Protective Jet Cover: Prevents dust and debris from entering the flame jet One-Press Ignition: Single button both opens the cover and ignites the flame Metal Construction: Built to last with premium textured or glossy finishes Adjustable Flame: Screwdriver-friendly control at the base Unlike most lighters with exposed jets, the Stratos features a built-in protective cover that flips open as you ignite, keeping the torch clear and ready to use. The push-down ignition is highly tactile — one smooth press opens the cover and sparks the torch, making it feel as satisfying as it is functional. Available in a textured matte black finish or a glossy sparkle burgundy reminiscent of a sports car, the Vector Stratos delivers both style and substance for anyone who wants their everyday carry lighter to stand out.

Read more less

Vector Summit Single Flame Torch Lighter The Vector Summit combines the classic feel of a flint ignition with the power of a modern butane torch. Measuring 3.38" tall, 0.88" wide, and just 0.67" deep, this slim vertical design is perfect for everyday carry while still offering serious performance. Key Features Flint Ignition: Traditional spark-wheel design with modern torch flame Slim Vertical Build: Compact, portable lighter with a narrow profile Adjustable Flame Dial: Fingernail or screwdriver-friendly control at the base Stylish Finishes: Available in gunmetal or bold red matte Everyday Carry Ready: Lightweight and highly portable design Instead of electronic ignition, the Vector Summit uses a classic flint-style spark wheel — just flick the wheel to spark, and the butane torch ignites with a clean, blue flame. This makes it a unique option for anyone who enjoys the tactile feel of a traditional lighter but wants the performance of a modern torch. Sleek, stylish, and pocket-friendly, the Vector Summit is ideal for everyday carry or anyone who appreciates a lighter that blends classic design with modern function.

Read more less

Vector Ultra Slim Single Flame Torch Lighter The Vector Ultra is a sleek, pocket-friendly torch lighter designed for everyday carry. Measuring just 2.4" tall, 1.36" wide, and only 0.45" deep, this ultra-slim design makes it one of the most compact single flame lighters available. Built from durable metal, it feels solid in the hand while staying light and easy to carry. Key Features Ultra-Slim Design: Just 0.45" deep for a discreet everyday carry Angled Flame: 45° flame output for easier, more comfortable lighting Simple Thumb Ignition: Push-to-the-side action with intuitive grip point Durable Metal Build: Satin rose gold or metallic speckled blue finish Adjustable Flame: Fine-tune with a coin or small screwdriver Operating the Vector Ultra is simple and intuitive. Rest your thumb on the raised grip near the top, push to the side, and the angled flame ignites instantly. The compact flame adjuster at the bottom lets you dial in the flame size for your needs. If you’re looking for a compact and stylish torch lighter that’s as slim as it is reliable, the Vector Ultra is a perfect choice. Sleek, discreet, and built to last, it’s ideal for anyone who values everyday carry performance without the bulk.

Read more less

Vector Speed Single Flame Torch Lighter The Vector Speed is a compact and powerful single flame torch lighter that delivers reliable performance with smart features in a stylish design. Measuring just 3" tall, 2.5" wide, and 0.75" deep, it’s easy to carry while offering the quality Vector is known for. Key Features Angled Flame: 45° flame output for more comfortable lighting Flame Lock: Hands-free operation with simple thumb control Fuel Gauge: Transparent window shows butane level at a glance Large Adjustment Dial: Quickly fine-tune flame size from the base Stylish Finishes: Available in vibrant colour fade or matte black The intuitive thumb ignition makes the Vector Speed one of the easiest lighters to use. Just press down on the built-in safety, ignite with a push, and lock the flame on with an upward slide for continuous use. Whether you prefer the sleek matte finish or the eye-catching fade pattern, this lighter is designed to look sharp and work flawlessly. Built for portability and performance, the Vector Speed Torch Lighter is an excellent choice for anyone seeking a reliable single flame torch that’s easy to use and maintain. With Vector’s reputation for quality, you can count on it for years to come.

Read more less

DynaVap B2 — Complete Entry Kit (Silicone Stem + DynaTorch Included) The DynaVap B2 refines the original B design with a larger 0.075 g bowl, a durable O-ring-free silicone stem, and the brand-new DynaTorch lighter — all in one compact, Canadian-ready kit. Sorry, your browser doesn’t support embedded videos. See the DynaVap B2 Complete Kit in action — bigger bowl, better flavour, built to last. Overview The DynaVap B2 is a true evolution of the entry-level B — simpler, tougher, and more enjoyable. With a 0.075 g bowl, stainless-steel airpath, and unbreakable silicone stem, it delivers consistent, flavour-rich sessions anywhere. The kit also includes the DynaTorch lighter and a protective tin case for convenient portability. Ships from Canada 🇨🇦 with fast, tracked delivery and Canadian support from VapeNorth.ca. Key Features 0.075 g bowl (~50% larger than the original B) for satisfying draws. Silicone stem: O-ring-free, anti-roll, pocket-safe and durable. Stainless-steel airpath for clean taste and longevity. 10 mm water-piece fit for cooler, smoother vapour. DynaTorch included — cap-inspired butane lighter made for the B2. Protective tin case stores both B2 and DynaTorch together. Induction-heater compatible for hands-free use. Tip-swappable with other DynaVap tips (O-rings may remain installed). What’s Included 1 × DynaVap B2 device (silicone stem + stainless-steel tip & condenser) 1 × DynaTorch butane lighter 1 × Protective tin case (cap-inspired design) Performance & Design Compact, durable, and easy to use — the DynaVap B2 delivers precision manual vaporization without electronics. The silicone stem keeps cool to the touch, while the stainless-steel airpath preserves purity of flavour. Compatible with standard butane torches or induction heaters for consistent heating and repeatable sessions. B vs B2 — At a Glance Bowl Size: 0.075 g (~50% larger than the original B) Tip Design: Redesigned geometry for more even heating Stem: Anti-roll silicone stem with O-ring-free connection Lighter: DynaTorch included (instead of sold separately) Case: Protective tin included in kit Specifications Bowl Capacity: 0.075 g (fixed) Stem Material: Silicone (O-ring-free design) Airpath: Stainless Steel Water-Piece Fit: 10 mm connection Heating Method: Butane torch (included) or induction heater Case: Cap-shaped protective tin Who It’s For The DynaVap B2 is perfect for anyone looking for a simple, affordable entry into thermal extraction. It’s compact, unbreakable, and Canadian-ready — a great starter for new users and a fun addition for veterans who want a daily carry device. Frequently Asked Questions What’s new on the B2 compared to the original B? The B2 adds a larger bowl, redesigned tip, anti-roll silicone stem, and includes the DynaTorch and tin case right in the box. Can I use the B2 with an induction heater? Yes — its stainless-steel tip and cap make it fully compatible with most DynaVap-style induction heaters. Is the CCD adjustable on the B2? No, the B2 uses a fixed 0.075 g bowl for consistent and repeatable loads. Can I swap other tips onto the B2 stem? Yes — most DynaVap tips fit perfectly, even with O-rings installed. Does the B2 fit water pieces? Yes — it connects seamlessly with 10 mm joints for cooler draws.

Read more less

Dr. Dabber Drop – The Heated Loading Tool Reimagined The Dr. Dabber Drop is the long-awaited evolution of the original heated loading tool—the iconic Budder Cutter, first released in 2014. Redesigned from the ground up, this next-generation tool makes loading sticky, hard-to-manage waxes and oils into your eRig, banger, or pen faster, cleaner, and more efficient than ever. The Successor to a Game-Changer This is more than just an update. The Dr. Dabber Drop is a complete reimagining of one of the most innovative concentrate tools ever created. With a sleeker design, better performance, and enhanced versatility, it delivers everything you loved about the original—plus a whole lot more. Multi-Use Compatibility Whether you’re using an electric dab rig, a traditional setup, or a vape pen, the Dr. Dabber Drop fits seamlessly into your routine. It’s the ideal solution for anyone tired of messy loading or wasting concentrates on sticky tools that just don’t work. Calibrated Heating That Won’t Waste Your Concentrates The Drop features a carefully calibrated heating element that delivers just the right amount of heat—enough to handle sticky extracts, but not enough to burn or vaporize your valuable concentrates. It heats up quickly and maintains a stable temperature throughout use. Two Heat Settings for Total Control With dual heat settings, the Dr. Dabber Drop gives you the flexibility to handle any concentrate type with confidence. Toggle between heat levels depending on the thickness or consistency of your wax or oil. Designed for Everyday Convenience It’s not just functional—it’s smart. The Dr. Dabber Drop features a magnetic cap that attaches to the back of the unit while in use, so you never lose it. And with USB-C charging (cable included), it’s always ready when you are. Features At a Glance Next-gen heated loading tool for concentrates Successor to the original Budder Cutter (2014) Works with eRigs, bangers, and vape pens Prevents waste—doesn’t burn or vaporize concentrates Dual heat settings for different concentrate types Magnetic cap and USB-C charging included

Read more less

Vapvana All-Star Glass Bowl – Clean Flavour, Smart Airflow Built specifically for the All-Star heater, the All-Star Glass Bowl brings clean, pure glass performance to your desktop setup. It mirrors the All-Star’s heater profile for efficient heat transfer and dense, flavour-rich vapour, while the glass build keeps the taste crisp and true. Purpose-Built for the All-Star This bowl’s geometry matches the All-Star heater shape for consistent extractions and smooth airflow. A replaceable fine-mesh screen is pre-installed, and extra screens are included so you can keep sessions fresh with minimal downtime. Clear Without Lifting the Heater A built-in 10 mm pass-through on the side lets you clear your piece without removing the heater head. It’s faster, cleaner, and easier - especially during back-to-back draws. Fits Most Rigs Out of the Box The bowl features a 14 mm male joint to pair with the majority of water pieces. Running an 18 mm rig like Vapvana’s Big League Bubbler? You’re covered—an 18 mm adapter is included. Locked-In, Dialled-In An included Keck clip (joint clip) secures your connection, helping prevent accidental pulls when you lift the heater or clear the piece. What’s Included All-Star Glass Bowl (profile-matched to All-Star heater) Fine-mesh screen (installed) + extra screens 14mm male joint (bowl base) 18mm adapter Keck clip (joint clip)

Read more less

Vapvana All-Star Cordless Kit – Wireless Ball Vape Power and Freedom The All-Star Cordless Kit by Vapvana takes the same affordable power and performance of the All-Star lineup and removes the tether. With a cordless heater head and an organized wooden dugout dock, this system delivers massive, flavour-rich vapour without being tied to a wall. Designed for both flower and concentrates, the All-Star Cordless is a complete dual-use solution built for enthusiasts who want freedom, performance, and convenience in one package. Wireless Performance, Desktop Reliability Vapvana is known for its powerful ball vapes, and the All-Star Cordless continues that tradition with a stainless steel heater packed with 300 ruby balls (2.5mm). While the premium Ace system is made from titanium and uses gem-cut rubies with a larger bowl capacity, the All-Star Cordless provides a more accessible entry point to the same high-level performance. You still get dense vapour, strong flavour, and dependable heat - now with true wireless convenience. Dual-Use Design: Flower or Concentrates What sets the All-Star Cordless apart from the wired version is its dual-use capability. Out of the box, it’s ready for flower with the All-Star Modular Bowl, which can be used in half-size mode (0.1g microdose) or full-size mode (0.2g heavy hits). But the kit also includes a 25mm quartz auto-spinner banger with pearls and marble top, making it a fully capable concentrate system as well. With the included glass reducer, you can fit the banger onto 10mm or 14mm rigs. The Dugout Dock: Organized and Ready The wooden dugout dock is the control centre of the All-Star Cordless Kit. It holds the digital PID controller, heating coil, heat shield, heater stand, and all included accessories in one compact station. Built-in slots for 10mm, 14mm, and 18mm joints mean you can keep everything neatly in place. This isn’t just a heater - it’s a complete desktop setup designed for convenience and everyday use. Freedom vs. Endurance Going cordless means you gain tether-free freedom to move and use your setup without being locked to a wall plug. The trade-off is that, unlike the wired version, you won’t get endless back-to-back sessions without breaks. For many users, the ability to untether more than makes up for it, especially with the added dual-use flexibility and all-in-one dock design. What’s in the Box All-Star Cordless Heater (stainless steel, pre-assembled with rubies) All-Star Modular Bowl with removable wooden handle Heating Coil Assembly (25mm “Hot Hole”) Wooden Dugout Dock with built-in accessory slots Quartz Banger (25mm Auto Spinner) with pearls and marble top Glass Reducer (14mm to 10mm) Digital Temperature Controller (PID) Power cable (North American) Heater Stand Post for the dock Scoop & Tamper Tool (SQP) Wooden Cleaning Brush Spare screens, o-rings, and screws Why Choose the All-Star Cordless Kit? If you want premium ball vape performance in a complete, organized package at an affordable price, the All-Star Cordless Kit is your answer. With wireless freedom, dual-use compatibility, and Vapvana’s reputation for reliable performance, this system is built to impress. Whether you’re chasing massive clouds, rich flavour, or the convenience of a docked all-in-one setup, the All-Star Cordless delivers inning after inning.

Read more less

Vapvana All-Star Wired Kit – Affordable Powerhouse Ball Vape The All-Star Wired Kit by Vapvana is the newest addition to their lineup of high-performance desktop vaporizers. Built with a stainless steel housing and a modular design, the All-Star delivers massive, reliable vapour at a fraction of the price of premium titanium units. If you’ve wanted to experience the upper echelon of ball vape performance without breaking the bank, this kit is your ticket. Ball Vape Performance Without the Premium Price The All-Star borrows from Vapvana’s proven design philosophy: powerful heat, efficient airflow, and dense, flavour-rich vapour. While the Screwball remains Vapvana’s flagship titanium heavy-hitter, the All-Star provides an affordable entry point into the same league of performance. With its stainless steel build, diffuser-style heating, and 300 2.5mm ruby balls, the All-Star is engineered to satisfy both daily users and connoisseurs alike. Customizable Bowl for Microdosing or Full Sessions One of the standout features of the All-Star is its two-in-one modular bowl. Use it in half-size mode for a 0.1g load - perfect for microdosing or solo use - or switch to full-size mode for a 0.2g load, ideal for sharing or when you want huge, lung-expanding clouds. This flexibility makes the All-Star a versatile choice, bridging the gap between efficiency and raw power. Back-to-Back Power with Corded Convenience Unlike portable units that rely on battery life, the All-Star is a corded desktop vaporizer. Once it heats up, it’s ready to deliver back-to-back sessions without losing performance. No downtime, no waiting—just consistent, dense vapour whenever you want it. For daily drivers who want reliability and endurance, a wired setup is the gold standard. Engineered for Flavour and Reliability The All-Star’s stainless steel heater and ruby ball-filled diffuser maximize thermal retention and airflow, ensuring every hit is smooth, flavourful, and potent. Combined with the modular bowl, glass joint adapters, and a digital PID temperature controller, the All-Star Wired Kit offers a complete package designed to perform for years. What’s in the Box All-Star Wired Heater (stainless steel, pre-assembled with rubies) All-Star Modular Bowl with removable wooden handle 18mm and 14mm glass adapters for bowl Digital Temperature Controller (PID) Power cable (North American) Heater stand Scoop & Tamper Tool (SQP) Wooden cleaning brush Spare screens & O-rings Why Choose the All-Star Wired Kit? If you’re looking for a powerful, affordable ball vape that can stand toe-to-toe with premium models, the All-Star Wired Kit is a clear choice. It combines Vapvana’s reputation for dependable performance with a price point that makes top-tier vapour accessible to more enthusiasts. For anyone wanting to experience the next level of desktop vaporization, the All-Star delivers inning after inning.

Read more less

Puffco Pivot Glass Stems – Improve Your Portable Concentrate Experience The Puffco Pivot is widely considered the best portable concentrate vaporizer on the market today — and for good reason. With its default silicone mouthpiece, it already delivers smooth, flavourful vapour in a highly portable package. But as every connoisseur knows, adding a glass stem or water attachment can dramatically improve both flavour and comfort. That’s why we’re proud to offer this exclusive line of Puffco Pivot Glass Stems — three distinct options designed to bring more cooling, more smoothness, and more style to your sessions. Each stem is crafted for a secure fit, easy installation, and serious performance gains — all without compromising portability. 🔧 Simple Installation – Secure Fit Each glass stem is designed to fit the Puffco Pivot perfectly and securely. Just open the atomizer lid, and insert the glass stem under the silicone lip — it snaps into place just like the lid would. Once installed, it stays firmly in place until you remove it. 💨 Why Switch to Glass? Glass offers a substantial upgrade over silicone by providing greater vapour cooling and smoother airflow. These stems increase the distance between the vaporization chamber and your mouth, while also introducing features like beads, spikes, or water filtration to actively cool and condition the vapour. The result? Cooler, smoother, and more flavourful hits — all while preserving the Pivot’s pocketable form factor. 🧪 Choose Your Cooling: 3 Stem Options 🚀 The Puffco Pivot Evolution Stem This is your go-to for maximum dry cooling in the shortest possible space. The 2.5-inch Evolution Stem is filled with multicolour glass beads that increase the internal surface area, slowing vapour down and pulling heat from it before it reaches your lips. These beads act as both a heat sink and a vapour maze, giving you smoother hits without the need for water or bulk. Length: 2.5 inches Cooling Method: Multicolour glass bead fill Best for: Maximum dry cooling 🌵 The Puffco Pivot Cactus Stem Compact and clever, the Cactus Stem is just 1.5 inches long, making it the best choice for users who want to keep their Pivot ultra-portable. Inside, you’ll find three paired spike sets designed to break up vapour flow, forcing it throughout the stem for better cooling. It adds serious smoothness without greatly changing the form factor of your device. Length: 1.5 inches Cooling Method: Triple-spike vapour disruption Best for: Discreet cooling with minimal size increase 💧 The Puffco Pivot BubbleStem Looking for the ultimate in cool, smooth draws? The BubbleStem takes your Puffco Pivot and turns it into a mini water pipe. At 3.5 inches tall, it incorporates a small water chamber that acts like a portable bubbler. Just a bit of water makes a massive difference in reducing harshness and smoothing out every inhale — perfect for sensitive lungs or high-temp dabs. Height: 3.5 inches Cooling Method: Built-in water chamber Best for: Maximum cooling and smoothness 📦 Features at a Glance: All stems fit securely under the Puffco Pivot lid system Zero tools or mods required — install in seconds Enhanced vapour cooling without sacrificing portability Made from durable, high-quality borosilicate glass Compatible with all Puffco Pivot units 🚀 Why It Matters The Puffco Pivot is already an elite portable concentrate device — but adding a glass stem upgrades the experience dramatically. Whether you're looking for a subtle cooling boost or full-blown water filtration, this trio of stems gives you options to customize your draw and enhance your flavour. Don’t settle for harsh hits — upgrade your Pivot with the glass stem that fits your style.

Read more less

The Triple Play Pipe – A Classic Shape With a Functional Twist Meet the Triple Play Pipe: a familiar favourite reimagined with a subtle yet powerful design upgrade. This is the kind of water pipe that feels instantly familiar — but delivers more flavour, more cooling, and more compatibility with your favourite setups. Whether you’re using a vaporizer with a 14mm water pipe adapter or just love the smooth chug of a great piece, this one’s built for performance. 🔹 Classic Bong Shape – Modern Function Standing at a compact 10 inches tall, the Triple Play Pipe sports a time-tested silhouette: a broad cone-shaped base for water volume, leading up to a slightly flared comfort-fit mouthpiece. Not too big, not too tight — just right for easy draws and flavour-packed sessions. 🔹 Built for Vaporizers and Adapters This pipe features an 18mm joint with a 14mm downstem, giving you broad compatibility across most 14mm water pipe adapters used in the vaporizer world. If your vape has a WPA, chances are this piece is plug-and-play. 🔹 The Iconic Chug – With Airflow Upgrades At the base of the removable downstem, you’ll find a 6-slit classic tube percolator — a tried-and-true design that gives you that deep, familiar bong rumble with a touch of extra airflow. The added side slits help open up the pull, balancing backpressure with satisfying diffusion. 🔹 Triple Chamber Splash Protection What sets the Triple Play Pipe apart is its upper section. Nestled between the water reservoir and the mouthpiece is a visually striking triple-glass splash catcher. This triple-tiered structure doesn’t just look cool — it actively reduces water splashback, keeping your lips dry and your session clean. It’s a rare blend of form and function in one smooth piece. 🔹 Designed for Ball Vapes – But Great With Any Setup If you’re using a ball vape or another high-performance desktop vaporizer, you’ll appreciate the cooling capacity here. The large base holds enough water for heat dissipation, while the airflow and percolation aren’t so intense that they mute flavour. It’s the sweet spot between smooth and tasty. 📦 Features at a Glance: Height: 10” tall Joint: 18mm female with included 14mm downstem Percolator: Classic tube-style with 6 diffusion slits Unique triple-glass splash catcher section Cone-style base holds solid water volume for cooling Comfort-fit mouthpiece Compatible with 14mm water pipe adapters Ideal for use with vaporizers 🚀 Final Thoughts The Triple Play Pipe is exactly what it sounds like — a three-way win: iconic design, vaporizer compatibility, and standout splash control. Whether you’re upgrading your setup or adding a new daily driver to your rotation, this piece delivers classic function with a premium touch.

Read more less

The Natural Kit – All-Glass Ball Vape System by Vapvana 🔥 The Pinnacle of Purity – No Metal, No Compromise If you’re the kind of person who wants the best, then this is the kit for you. The Natural Kit from Vapvana isn’t just another Ball Vape—it’s a statement. Featuring a completely metal-free vapor path made entirely of quartz and sapphire, this is the first of its kind. From the injector housing to the glass bowl, The Natural delivers ultra-clean flavour in an all-in-one, no-missing-parts setup designed for those who truly know what they’re looking for. 💨 Why Choose The Natural Kit? 100% Quartz + Sapphire Heating Engine – Zero metal. All glass. Just pure thermal extraction. Complete Connoisseur-Grade Kit – Includes every single part you need (except water piece & flower). Precision PID Controller – Dial in your exact temp with confidence. Concentrate-Ready – Includes a full quartz banger setup with spinner action. Wooden Dugout Dock – Keeps your station clean, organized, and ready for launch. ⚙️ Kit Contents The Natural Heater – 18mm Quartz Injector housing with ~205 sapphire pearls, threaded lid, and quartz handle All-Glass Backstop Bowl – Built-in 10mm adapter and dry catch PID Temperature Controller – For total heat control Power Cable – 110v for North American systems Dugout Dock – Solid wooden base for controller, coil, and tools 20mm Hot Hole Coil – Delivers powerful, stable heat Heater Stand Post (with Glass Insert) – Keeps the quartz heater safely parked Quartz Banger Set – 20mm auto spinner with 8mm pearl and marble cap Tools Included – Scoop + brush = ready for game time BONUS: Early orders include a FREE Basic Glass Injector Bowl 🎯 Who Is This Kit For? Connoisseurs who crave the cleanest flavour possible Ball Vape enthusiasts who want an all-in-one setup Users ready to ditch metal and embrace full quartz & sapphire performance Anyone who appreciates great design and organized function 🧠 FAQ Q: Does this kit include everything I need to get started? A: Yes—everything except your water pipe and herb. You’re fully loaded with tools, heat system, bowls, and concentrate gear. Q: Is the heater pathway 100% metal-free? A: Yes. The heater is built entirely from quartz and sapphire—no metal at all in the airpath or engine design. Q: Can I use this with concentrates? A: Absolutely. The kit includes a quartz banger set specifically for concentrate use. Q: How does the flavour compare to other Ball Vapes? A: With no metal in the mix and full quartz & sapphire internals, The Natural delivers a noticeably cleaner, purer flavourthan standard setups. 🏆 Step Up to The Natural The Natural Kit isn’t for everyone—it’s for those who know exactly what they want. No plastic, no metal, no weak links—just full flavour and flawless function. If you’ve been waiting for the ultimate glass-on-glass Ball Vape experience, this is it. Read our full review of the VapVana Natural here.

Read more less

DynaVap G3 – Battery-Free Glass Vaporizer for Dry Herb The Purest Way to Vape, Now Under $50 Experience Thermal Freedom No batteries. No buttons. No nonsense. The DynaVap G3 brings back the joy of pure, direct vaporization—with just a flame and a flick of the wrist. Built around the power of thermal extraction, this all-glass portable vaporizer delivers rich flavour and smooth hits in seconds. Whether you're a microdoser, minimalist, or just tired of charging, the G3 keeps it simple without cutting corners. Why Choose the G3? Battery-Free by Design – Heat it with a torch - no cables, no chargers, no waiting. Glass-on-Glass Purity – A unibody stem and tip combo built from quality glass for clean flavour and easy maintenance. Captive Cap Technology – Audible “click” lets you know exactly when it’s ready—no guesswork, no overheating. Tri-Lobe Stem – Anti-roll design keeps your G3 from slipping off the table and onto the floor. Pocket-Sized Efficiency – The G3 tin case fits anywhere. Just toss it in your pocket, heat it up, and go. Simplify Your Session Load the chamber with just a pinch - around 0.05g is all it takes. Then cap it, heat it, and inhale. The G3’s click-to-vape system means you don’t need to guess when it’s ready. It’s fast, efficient, and designed to stretch your herb further than you thought possible. Want a stronger hit? Just let it soak up a few more seconds of heat, then ride the clouds. What’s in the Box? 1 × G3 Glass UniBody (tip + stem) 1 × Stainless Steel Captive Cap 1 × Slim Metal Storage Tin Recommended Tips Heat the cap evenly near the tip until you hear the first “click.” Inhale slowly for best vapour density and flavour. Listen for the second “click” to know when it’s cooling down. For stronger hits, heat for an extra second or two after the first click. Lightweight. Portable. Powerful. The DynaVap G3 isn’t just a budget-friendly entry into the world of dry herb vaporization - it’s a fully capable, highly efficient tool in a glass package. Whether you’re new to vaping or just want something simple and effective, this is one of the best value buys under $50. Perfect For: Anyone new to vaporizing looking for an easy entry point Fans of clean flavour and full manual control Microdosers and budget-conscious users People who hate charging and just want to heat and go Ready to Cut the Cord? Step away from batteries and into total control. The DynaVap G3 is your new go-to for flavourful, on-demand thermal extraction—whenever and wherever you want it. No batteries. No limits. Just glass, flame, and performance. Read our full review of the DynaVap G3 here.

Read more less

Camouflet Super Capacitor The Ultimate Upgrade for XL Performance The Super Capacitor is the enhanced heating powerhouse for the Convector XL and Ceramo XL. Built from pure stainless steel and packed with quadruple the thermal mass, it delivers unmatched heat retention, increased extraction, and smoother sessions — even with a torch. Key Features: 100% Stainless Steel Construction – Designed for optimal induction compatibility and long-lasting durability 4x the Thermal Mass – Retains heat far longer for extended sessions and back-to-back hits without reheating Expanded Heating Matrix – More internal plates deliver deeper, more complete extraction Compatible with Convector XL & Ceramo XL – Plug-and-play with your existing Camouflet XL gear Forgiving Heat-Up – Easier for torch users with more margin for error and longer heat windows Why Choose the Super Capacitor? This is the biggest and most capable heater in Camouflet's lineup. Whether you’re just entering the battery-free vaporizer world or looking to push your XL rig further, the Super Capacitor gives you longer sessions, more consistent vapour, and higher extraction efficiency — all with less precision required. It’s a smoother ride with much more horsepower. Heat it with any source, but for best results, we recommend pairing it with Camouflet’s Inductor. Includes: 1x Super Capacitor Compatible With: Convector XL Ceramo XL

Read more less

Ceramo XL – The Pinnacle of Battery-Free Convection Welcome to a new standard in dry herb vaporization. The Ceramo XL is a precision-engineered convection device built for purists who value clean flavour, efficient extraction, and rock-solid durability. It’s designed to outperform traditional vaporizers — all without batteries or electronics. One-Piece Zirconia Construction The Ceramo XL is machined from a solid block of black zirconia — a tough, heat-resistant ceramic known for its stability and neutral flavour. Its friction-fit screen and no-o-ring design reduces maintenance and keeps performance consistent session after session. Designed for Performance, Built to Last Ceramic Airpath – Smooth airflow with minimal heat soak or flavour distortion Ultra-High-Flow (UHF) Stem – Built for strong, easy draws and fast clearing Heater Plate Matrix – Optimized for deep, even convection extraction 0.2g Chamber Capacity – Wide and shallow for easy loading and quick clearing 14mm Male Taper – Compatible with your favourite glass pieces Replaceable Metal Screen – Friction-fit for easy cleaning or swapping How to Use the Ceramo XL Loosely fill the chamber with a medium grind of dry herb. Place the XL Camo Cap onto the heater end of the device. Apply heat to the tip using a torch or the Inductor. Heat for 4–7 seconds (Inductor) or 7–15 seconds (torch). Inhale gently from the stem. Rotate and reheat for 2–3 cycles to fully extract your material. What’s Included 1 x Ceramo XL (Black Zirconia) 1 x XL Camo Cap 1 x Replaceable Metal Chamber Screen 1 x Bambox Storage Case 1 x Burner Torch Lighter 1 x Cap Adjustment Tool Inspired by the Convector XL The Ceramo XL expands on the proven design of the Convector XL, delivering even greater airflow, upgraded materials, and a simplified, o-ring-free structure. It retains the trusted heater matrix and 14mm taper while pushing flavour and form to the next level. Why Choose Ceramo XL? Ceramic Airpath – Smooth flavour and high heat resistance Low Maintenance – No o-rings or fragile seals Fast Extraction – Full sessions in 2–3 heat cycles Glass Ready – 14mm taper fits water pieces right out of the box If you’re ready for high-performance convection without batteries or complexity, the Ceramo XL is your next move.

Read more less

Extra Large Chill Ice Cube Tray Set The ultimate ice solution for your Chill Steel Pipe. This custom-moulded tray is designed to create the largest possible ice cubes that will still fit perfectly inside your Chill Pipe — no wasted space, no compromises. Made Specifically for Chill Steel Pipes Each tray produces seven extra-large cubes engineered to match the internal dimensions of your Chill Pipe. That means you get maximum ice volume for a longer-lasting chill — keeping your water icy cold for up to 24 hours. Why Use This Instead of Regular Ice? Perfect Fit — No jamming or melting cubes to make it work Maximum Chill — Fills the pipe with ice for extended cooling Purpose-Built — Designed for your Chill, not your cocktail A Must-Have Accessory Using regular freezer ice just doesn't cut it. With this tray, you're always ready to load up your Chill Pipe with precision-sized cubes that perform better and last longer. It’s the easiest upgrade you'll ever make. What’s Included: 1 x Extra Large Ice Cube Tray (7 cube capacity) Made from durable, food-safe silicone Upgrade your Chill experience with the ice tray designed to match it — because Chill deserves better than standard cubes.

Read more less