Hot New Vaporizers & Accessories

Crossing Heated Dab Tool (Hot Knife) Load clean. Drop clean. No mess. The Crossing Heated Dab Tool is the easy way to load sticky concentrates into your wax pen or e-rig without scraping the sides of the bowl. A ceramic hot-knife tip, three voltage levels, and simple one-button controls let you warm and release your dab with precision. It’s compact, USB-C rechargeable, and comes with a protective cap for pocket-safe carry. Key Features Heated ceramic tip for smooth, mess-free loading 3 voltages (Blue / Green / Red) to match different concentrate textures Two heat modes: quick cycle (double-click) or manual hold USB-C charging with included cable Protective cover cap for safe storage 550 mAh battery for plenty of reloads between charges One-button operation—fast to learn, easy to use Why You’ll Like It Less mess: Warm the tip and your dab slides cleanly into the chamber—no more hard scraping. Better control: Choose a lower level for softer waxes or higher for firmer concentrates like shatter. Pocket-friendly: Lightweight, capped, and ready to travel. How to Use the Crossing Heated Dab Tool Remove the glass/plastic cap. Power on: Press the button 5× to turn on (repeat to turn off). Select voltage: Press 3× to cycle Blue → Green → Red. Heat the tip: Quick cycle: Press 2× to start a short auto heat. Manual: Press & hold to heat while you load. Scoop your concentrate, hover over the chamber, then warm the tip—after a few seconds the dab will slide off cleanly. Replace the cap when finished and power off. Tip: Use Blue/low for most waxes; bump to Red/high for firmer textures. Battery & Charging The integrated 550 mAh battery delivers many reloads per charge. Top up with the included USB-C cable. As with any small device, actual run-time will vary by heat level and usage. Easy Cleaning While the tip is still warm (not red-hot), wipe it with a vape-safe cleaning wipe to remove residue. Keep the protective cap on during storage to extend tip life and prevent debris. Specifications Tip Ceramic heated “hot-knife” style Heat Levels 3 voltages (Blue / Green / Red) Controls 1 button • 5× power • 3× level • 2× cycle • hold to heat Battery 550 mAh (integrated) Charging USB-C Cap Included protective cover Use Case Loading wax pens & e-rig chambers What’s in the Box Crossing Heated Dab Tool (Hot Knife) Protective tip cover USB-C charging cable Owner’s manual FAQs Which heat level should I use? Start on Blue for softer waxes. If the dab doesn’t release cleanly, step up to Green or Red for firmer concentrates like shatter. How do I keep the tip clean? Wipe the tip while warm with a vape-safe cleaning wipe every few sessions. Avoid scraping with metal tools. Will it work with my wax pen or e-rig? Yes—this tool is brand-agnostic. It simply helps you transfer concentrates cleanly into most chambers. Is there an auto shut-off? The quick-cycle heat runs for a short, pre-set interval. Always power off when finished and replace the cap. Safety Notes The tip gets hot—keep away from skin, fabrics, and flammables. Allow the tip to cool before capping or cleaning. Charge with a quality USB-C cable and reputable power source. Store capped, out of reach of children and pets.

Read more less

Ruby Twist Injector Vaporizer Kit – Titanium Ball Vape with Ruby Core The Ruby Twist Injector is a next-generation ball vape thermal injector designed for massive heat retention, smooth airflow, and incredibly efficient extractions. Built from durable titanium and filled with ~230 gem-cut ruby pearls, this desktop powerhouse delivers stable heat, huge clouds, and the kind of performance usually reserved for much more expensive injectors. Why the Ruby Twist Stands Out Twisting Airflow Design: A vortex-style intake path spirals the output air, maximizing contact for consistent vaporization and richer flavour. 230 Ruby Thermal Mass: Gem-cut ruby holds and radiates heat evenly, preventing hot spots and allowing powerful, repeatable hits back-to-back. Titanium Housing: Lightweight yet strong, the titanium injector ensures quick responsiveness and durability. Fast Heat-Up: Reaches operating temp in mere minutes thanks to the 20 mm coil and precision PID controller. Low Maintenance: Easy to clean, simple design—no moving parts, no hassle. Complete Kit – Everything You Need Ruby Twist Injector Core (titanium housing with ~230 ruby media) Crossing Tech PID Controller (digital screen, auto shutoff, °F/°C toggle) 20 mm Heater Coil with handle Coil Heat Guard for safe operation Adjustable Microdose Diffuser Chamber (pass-through design, compatible with small or large loads) 14 mm → 19 mm Glass Adapter Coil Stand to safely rest the hot injector Herb Scoop & Wood Brush for easy prep and cleaning Note: Water pieces/bubblers are sold separately, but the kit works with 14mm and 18mm glass. Technical Specifications PID Controller Power: up to 150 W Voltage: 120 V standard (auto-switches for 220 V when paired with 220 V coil) Temperature Range: 220°F – 990°F Connector: 5-pin XLR Controller Size: 72 × 36 × 108 mm (2.83 × 1.42 × 4.25 in) Weight: ~0.8 kg Heat-Up Time: ~45 seconds How It Works Plug the titanium Ruby Twist injector into the PID and place it in the heat stand. Set your target temperature on the PID (typical range 270–330°C / 518–626°F for efficient vaporization). Load your herb into the microdose diffuser or compatible bowl. Place the injector on top of the bowl and draw steadily. The twisting airflow ensures even heating without stirring. Return the injector to the coil stand between hits. Safety & Care Do not preheat the injector while seated in glass; thermal expansion can damage the bowl. Always use the included stand when the injector is hot. Keep loose sleeves, hair etc. clear of the coil and injector. Clean glass with ISO, rinse and dry thoroughly before use. Who It’s For Ball vape enthusiasts seeking premium performance at an unbeatable value. Users who want consistent results with low-temp efficiency or high-temp extraction power. Everyday desktop users looking for simple, reliable, and hard-hitting design. Why Choose the Ruby Twist? With its titanium housing, massive ruby thermal core, and twisting airflow, the Ruby Twist Injector is one of the most efficient and powerful ball vapes available today. It outperforms many pricier competitors by delivering smoother, denser vapour at lower temps—all while staying simple to set up and easy to maintain. If you want serious desktop performance in a complete kit, this is it.

Read more less

Vector Mystique Single Flame Torch Lighter The Vector Mystique pairs a sleek, vertical profile with one of the most comfortable ignition systems we’ve used. At 3.37" tall, 0.78" wide, and 0.94" deep, it’s slim, pocket-friendly, and built from metal for everyday durability. Key Features Side-Lever Ignition: Low-effort, natural thumb press to ignite and hold the flame Ultra-Slim Vertical Design: Tall, narrow body for easy everyday carry Large Flame Dial: Oversized adjuster at the base—turn with thumb and finger (no tool needed) Metal Construction: Solid feel and long-lasting durability Stylish Finishes: Metallic blue or gunmetal satin The side-lever ignition is the star here: press the small metal lever that rests flush against the body to fire the torch, then keep it comfortably depressed as long as you need. Because you’re holding a lever—not pushing in or flicking sideways—it’s exceptionally easy on the thumb and a great choice for anyone with mobility or grip issues. With its slim profile, simple operation, and large, easy-to-use flame adjustment, the Vector Mystique is an outstanding everyday carry torch lighter that blends comfort, style, and performance.

Read more less

Vector Stratos Single Flame Torch Lighter The Vector Stratos is a single flame torch lighter that stands out with its bold steampunk-inspired design and durable metal build. Compact at 2.87" tall, 1.30" wide, and 0.73" deep, it blends eye-catching style with practical performance. Key Features Steampunk Aesthetic: Unique industrial design with tactile controls Protective Jet Cover: Prevents dust and debris from entering the flame jet One-Press Ignition: Single button both opens the cover and ignites the flame Metal Construction: Built to last with premium textured or glossy finishes Adjustable Flame: Screwdriver-friendly control at the base Unlike most lighters with exposed jets, the Stratos features a built-in protective cover that flips open as you ignite, keeping the torch clear and ready to use. The push-down ignition is highly tactile — one smooth press opens the cover and sparks the torch, making it feel as satisfying as it is functional. Available in a textured matte black finish or a glossy sparkle burgundy reminiscent of a sports car, the Vector Stratos delivers both style and substance for anyone who wants their everyday carry lighter to stand out.

Read more less

Vector Summit Single Flame Torch Lighter The Vector Summit combines the classic feel of a flint ignition with the power of a modern butane torch. Measuring 3.38" tall, 0.88" wide, and just 0.67" deep, this slim vertical design is perfect for everyday carry while still offering serious performance. Key Features Flint Ignition: Traditional spark-wheel design with modern torch flame Slim Vertical Build: Compact, portable lighter with a narrow profile Adjustable Flame Dial: Fingernail or screwdriver-friendly control at the base Stylish Finishes: Available in gunmetal or bold red matte Everyday Carry Ready: Lightweight and highly portable design Instead of electronic ignition, the Vector Summit uses a classic flint-style spark wheel — just flick the wheel to spark, and the butane torch ignites with a clean, blue flame. This makes it a unique option for anyone who enjoys the tactile feel of a traditional lighter but wants the performance of a modern torch. Sleek, stylish, and pocket-friendly, the Vector Summit is ideal for everyday carry or anyone who appreciates a lighter that blends classic design with modern function.

Read more less

Vector Ultra Slim Single Flame Torch Lighter The Vector Ultra is a sleek, pocket-friendly torch lighter designed for everyday carry. Measuring just 2.4" tall, 1.36" wide, and only 0.45" deep, this ultra-slim design makes it one of the most compact single flame lighters available. Built from durable metal, it feels solid in the hand while staying light and easy to carry. Key Features Ultra-Slim Design: Just 0.45" deep for a discreet everyday carry Angled Flame: 45° flame output for easier, more comfortable lighting Simple Thumb Ignition: Push-to-the-side action with intuitive grip point Durable Metal Build: Satin rose gold or metallic speckled blue finish Adjustable Flame: Fine-tune with a coin or small screwdriver Operating the Vector Ultra is simple and intuitive. Rest your thumb on the raised grip near the top, push to the side, and the angled flame ignites instantly. The compact flame adjuster at the bottom lets you dial in the flame size for your needs. If you’re looking for a compact and stylish torch lighter that’s as slim as it is reliable, the Vector Ultra is a perfect choice. Sleek, discreet, and built to last, it’s ideal for anyone who values everyday carry performance without the bulk.

Read more less

Vector Speed Single Flame Torch Lighter The Vector Speed is a compact and powerful single flame torch lighter that delivers reliable performance with smart features in a stylish design. Measuring just 3" tall, 2.5" wide, and 0.75" deep, it’s easy to carry while offering the quality Vector is known for. Key Features Angled Flame: 45° flame output for more comfortable lighting Flame Lock: Hands-free operation with simple thumb control Fuel Gauge: Transparent window shows butane level at a glance Large Adjustment Dial: Quickly fine-tune flame size from the base Stylish Finishes: Available in vibrant colour fade or matte black The intuitive thumb ignition makes the Vector Speed one of the easiest lighters to use. Just press down on the built-in safety, ignite with a push, and lock the flame on with an upward slide for continuous use. Whether you prefer the sleek matte finish or the eye-catching fade pattern, this lighter is designed to look sharp and work flawlessly. Built for portability and performance, the Vector Speed Torch Lighter is an excellent choice for anyone seeking a reliable single flame torch that’s easy to use and maintain. With Vector’s reputation for quality, you can count on it for years to come.

Read more less

DynaVap B2 – Complete Entry Kit (Silicone Stem, 0.075 g Bowl, DynaTorch) The DynaVap B2 is a refined evolution of the original B: an ultra-accessible, durable dry herb vaporizer that keeps things simple while adding real quality-of-life upgrades. You get a bigger 0.075 g bowl, an unbreakable silicone stem with an O-ring-free tip interface, a full stainless-steel airpath, 10 mm water-piece compatibility, and the brand-new DynaTorch lighter in the box — all in one ready-to-go kit. Ships from Canada with fast, tracked delivery and Canadian customer support. Key Features 0.075 g bowl (~50% larger than the original B) for satisfying, efficient sessions. Silicone stem: flexible, pocket-safe, O-ring-free tip interface; improved anti-roll geometry. Stainless-steel airpath via the condenser for clean, durable performance. 10 mm water-piece fit — drop into compatible glass for cooler draws. DynaTorch included — DynaVap’s custom butane torch with cap-inspired styling. Protective tin case — cap-shaped, sized to store the B2 and DynaTorch together. Induction-heater compatible — stainless tip & cap play nicely with IH units. Tip-swappable — use other DynaVap tips; O-rings can remain installed. What’s Included DynaVap B2 device (silicone stem + stainless-steel tip & condenser) DynaTorch butane lighter Protective tin case (cap-inspired design) Specifications Bowl size 0.075 g (fixed; no adjustable CCD positions) Stem Silicone; O-ring-free tip interface; anti-roll shaping Airpath Stainless-steel tip → stainless-steel condenser → mouth Water-piece compatibility 10 mm Heating Butane torch (included) or induction heater Case Cap-inspired protective tin; fits device + torch Who the DynaVap B2 Is For Great Fit If You Want… An entry-friendly, budget-conscious DynaVap starter kit An unbreakable, pocketable stem with low maintenance Water-piece options without extra adapters (10 mm) Induction-heater flexibility Consider Alternatives If You Want… Adjustable bowl depth (CCD position changes) Premium/exotic materials throughout Advanced airflow controls and fine-tuning Quick Start & Tips Grind & load lightly to the rim (0.075 g). Don’t overpack. Heat evenly while rotating the cap; avoid hovering on one spot. Listen for the click — start drawing on the first click; reheat after the cool-down click. Try water: seat the B2 in a 10mm glass piece for cooler, smoother vapour. IH users: stainless tip & cap make induction heating consistent and convenient. DynaVap B vs DynaVap B2 (Quick Comparison) Feature B B2 Bowl size ~0.05 g 0.075 g (~+50%) Tip Very basic Redesigned geometry Stem Silicone, O-ring-free interface Silicone with anti-roll shaping; O-ring-free interface Airpath Stainless via condenser Stainless via condenser Water-piece fit 10 mm 10 mm Included torch Not included DynaTorch included Case Varies Protective tin (cap-inspired) Frequently Asked Questions What’s new on the B2 versus the original B? The B2 adds a 0.075 g bowl (~50% larger), a redesigned tip, an O-ring-free tip interface on the silicone stem with anti-roll shaping, keeps the stainless-steel airpath, and now includes the DynaTorch and a protective tin case. Does the B2 work with induction heaters? Yes. The stainless-steel tip and cap make the B2 compatible with common DynaVap-style induction heaters. Can I use other DynaVap tips on the B2 stem? Yes. The B2 stem accepts other DynaVap tips. If your tip has O-rings installed, you can typically leave them on. Will the B2 fit a water piece? Yes — the B2 interfaces with 10 mm connections for quick, compact water cooling. Is the CCD adjustable on the B2? No. The B2 uses a fixed 0.075 g bowl for straightforward loading and repeatable results. Why Buy from VapeNorth.ca Canadian retailer — fast, tracked shipping from within Canada Real support — knowledgeable help from a team that actually uses this gear Carefully curated — we stock the parts and accessories to complete your setup Tip: Pair your B2 with a 10mm glass piece, extra CCDs, and an induction heater for the most versatile experience. Read our full DynaVap B2 review here.

Read more less

Dr. Dabber Drop – The Heated Loading Tool Reimagined The Dr. Dabber Drop is the long-awaited evolution of the original heated loading tool—the iconic Budder Cutter, first released in 2014. Redesigned from the ground up, this next-generation tool makes loading sticky, hard-to-manage waxes and oils into your eRig, banger, or pen faster, cleaner, and more efficient than ever. The Successor to a Game-Changer This is more than just an update. The Dr. Dabber Drop is a complete reimagining of one of the most innovative concentrate tools ever created. With a sleeker design, better performance, and enhanced versatility, it delivers everything you loved about the original—plus a whole lot more. Multi-Use Compatibility Whether you’re using an electric dab rig, a traditional setup, or a vape pen, the Dr. Dabber Drop fits seamlessly into your routine. It’s the ideal solution for anyone tired of messy loading or wasting concentrates on sticky tools that just don’t work. Calibrated Heating That Won’t Waste Your Concentrates The Drop features a carefully calibrated heating element that delivers just the right amount of heat—enough to handle sticky extracts, but not enough to burn or vaporize your valuable concentrates. It heats up quickly and maintains a stable temperature throughout use. Two Heat Settings for Total Control With dual heat settings, the Dr. Dabber Drop gives you the flexibility to handle any concentrate type with confidence. Toggle between heat levels depending on the thickness or consistency of your wax or oil. Designed for Everyday Convenience It’s not just functional—it’s smart. The Dr. Dabber Drop features a magnetic cap that attaches to the back of the unit while in use, so you never lose it. And with USB-C charging (cable included), it’s always ready when you are. Features At a Glance Next-gen heated loading tool for concentrates Successor to the original Budder Cutter (2014) Works with eRigs, bangers, and vape pens Prevents waste—doesn’t burn or vaporize concentrates Dual heat settings for different concentrate types Magnetic cap and USB-C charging included

Read more less

Vapvana All-Star Glass Bowl – Clean Flavour, Smart Airflow Built specifically for the All-Star heater, the All-Star Glass Bowl brings clean, pure glass performance to your desktop setup. It mirrors the All-Star’s heater profile for efficient heat transfer and dense, flavour-rich vapour, while the glass build keeps the taste crisp and true. Purpose-Built for the All-Star This bowl’s geometry matches the All-Star heater shape for consistent extractions and smooth airflow. A replaceable fine-mesh screen is pre-installed, and extra screens are included so you can keep sessions fresh with minimal downtime. Clear Without Lifting the Heater A built-in 10 mm pass-through on the side lets you clear your piece without removing the heater head. It’s faster, cleaner, and easier - especially during back-to-back draws. Fits Most Rigs Out of the Box The bowl features a 14 mm male joint to pair with the majority of water pieces. Running an 18 mm rig like Vapvana’s Big League Bubbler? You’re covered—an 18 mm adapter is included. Locked-In, Dialled-In An included Keck clip (joint clip) secures your connection, helping prevent accidental pulls when you lift the heater or clear the piece. What’s Included All-Star Glass Bowl (profile-matched to All-Star heater) Fine-mesh screen (installed) + extra screens 14mm male joint (bowl base) 18mm adapter Keck clip (joint clip)

Read more less

Vapvana All-Star Cordless Kit – Wireless Ball Vape Power and Freedom The All-Star Cordless Kit by Vapvana takes the same affordable power and performance of the All-Star lineup and removes the tether. With a cordless heater head and an organized wooden dugout dock, this system delivers massive, flavour-rich vapour without being tied to a wall. Designed for both flower and concentrates, the All-Star Cordless is a complete dual-use solution built for enthusiasts who want freedom, performance, and convenience in one package. Wireless Performance, Desktop Reliability Vapvana is known for its powerful ball vapes, and the All-Star Cordless continues that tradition with a stainless steel heater packed with 300 ruby balls (2.5mm). While the premium Ace system is made from titanium and uses gem-cut rubies with a larger bowl capacity, the All-Star Cordless provides a more accessible entry point to the same high-level performance. You still get dense vapour, strong flavour, and dependable heat - now with true wireless convenience. Dual-Use Design: Flower or Concentrates What sets the All-Star Cordless apart from the wired version is its dual-use capability. Out of the box, it’s ready for flower with the All-Star Modular Bowl, which can be used in half-size mode (0.1g microdose) or full-size mode (0.2g heavy hits). But the kit also includes a 25mm quartz auto-spinner banger with pearls and marble top, making it a fully capable concentrate system as well. With the included glass reducer, you can fit the banger onto 10mm or 14mm rigs. The Dugout Dock: Organized and Ready The wooden dugout dock is the control centre of the All-Star Cordless Kit. It holds the digital PID controller, heating coil, heat shield, heater stand, and all included accessories in one compact station. Built-in slots for 10mm, 14mm, and 18mm joints mean you can keep everything neatly in place. This isn’t just a heater - it’s a complete desktop setup designed for convenience and everyday use. Freedom vs. Endurance Going cordless means you gain tether-free freedom to move and use your setup without being locked to a wall plug. The trade-off is that, unlike the wired version, you won’t get endless back-to-back sessions without breaks. For many users, the ability to untether more than makes up for it, especially with the added dual-use flexibility and all-in-one dock design. What’s in the Box All-Star Cordless Heater (stainless steel, pre-assembled with rubies) All-Star Modular Bowl with removable wooden handle Heating Coil Assembly (25mm “Hot Hole”) Wooden Dugout Dock with built-in accessory slots Quartz Banger (25mm Auto Spinner) with pearls and marble top Glass Reducer (14mm to 10mm) Digital Temperature Controller (PID) Power cable (North American) Heater Stand Post for the dock Scoop & Tamper Tool (SQP) Wooden Cleaning Brush Spare screens, o-rings, and screws Why Choose the All-Star Cordless Kit? If you want premium ball vape performance in a complete, organized package at an affordable price, the All-Star Cordless Kit is your answer. With wireless freedom, dual-use compatibility, and Vapvana’s reputation for reliable performance, this system is built to impress. Whether you’re chasing massive clouds, rich flavour, or the convenience of a docked all-in-one setup, the All-Star Cordless delivers inning after inning.

Read more less

Vapvana All-Star Wired Kit – Affordable Powerhouse Ball Vape The All-Star Wired Kit by Vapvana is the newest addition to their lineup of high-performance desktop vaporizers. Built with a stainless steel housing and a modular design, the All-Star delivers massive, reliable vapour at a fraction of the price of premium titanium units. If you’ve wanted to experience the upper echelon of ball vape performance without breaking the bank, this kit is your ticket. Ball Vape Performance Without the Premium Price The All-Star borrows from Vapvana’s proven design philosophy: powerful heat, efficient airflow, and dense, flavour-rich vapour. While the Screwball remains Vapvana’s flagship titanium heavy-hitter, the All-Star provides an affordable entry point into the same league of performance. With its stainless steel build, diffuser-style heating, and 300 2.5mm ruby balls, the All-Star is engineered to satisfy both daily users and connoisseurs alike. Customizable Bowl for Microdosing or Full Sessions One of the standout features of the All-Star is its two-in-one modular bowl. Use it in half-size mode for a 0.1g load - perfect for microdosing or solo use - or switch to full-size mode for a 0.2g load, ideal for sharing or when you want huge, lung-expanding clouds. This flexibility makes the All-Star a versatile choice, bridging the gap between efficiency and raw power. Back-to-Back Power with Corded Convenience Unlike portable units that rely on battery life, the All-Star is a corded desktop vaporizer. Once it heats up, it’s ready to deliver back-to-back sessions without losing performance. No downtime, no waiting—just consistent, dense vapour whenever you want it. For daily drivers who want reliability and endurance, a wired setup is the gold standard. Engineered for Flavour and Reliability The All-Star’s stainless steel heater and ruby ball-filled diffuser maximize thermal retention and airflow, ensuring every hit is smooth, flavourful, and potent. Combined with the modular bowl, glass joint adapters, and a digital PID temperature controller, the All-Star Wired Kit offers a complete package designed to perform for years. What’s in the Box All-Star Wired Heater (stainless steel, pre-assembled with rubies) All-Star Modular Bowl with removable wooden handle 18mm and 14mm glass adapters for bowl Digital Temperature Controller (PID) Power cable (North American) Heater stand Scoop & Tamper Tool (SQP) Wooden cleaning brush Spare screens & O-rings Why Choose the All-Star Wired Kit? If you’re looking for a powerful, affordable ball vape that can stand toe-to-toe with premium models, the All-Star Wired Kit is a clear choice. It combines Vapvana’s reputation for dependable performance with a price point that makes top-tier vapour accessible to more enthusiasts. For anyone wanting to experience the next level of desktop vaporization, the All-Star delivers inning after inning.

Read more less

Puffco Pivot Glass Stems – Improve Your Portable Concentrate Experience The Puffco Pivot is widely considered the best portable concentrate vaporizer on the market today — and for good reason. With its default silicone mouthpiece, it already delivers smooth, flavourful vapour in a highly portable package. But as every connoisseur knows, adding a glass stem or water attachment can dramatically improve both flavour and comfort. That’s why we’re proud to offer this exclusive line of Puffco Pivot Glass Stems — three distinct options designed to bring more cooling, more smoothness, and more style to your sessions. Each stem is crafted for a secure fit, easy installation, and serious performance gains — all without compromising portability. 🔧 Simple Installation – Secure Fit Each glass stem is designed to fit the Puffco Pivot perfectly and securely. Just open the atomizer lid, and insert the glass stem under the silicone lip — it snaps into place just like the lid would. Once installed, it stays firmly in place until you remove it. 💨 Why Switch to Glass? Glass offers a substantial upgrade over silicone by providing greater vapour cooling and smoother airflow. These stems increase the distance between the vaporization chamber and your mouth, while also introducing features like beads, spikes, or water filtration to actively cool and condition the vapour. The result? Cooler, smoother, and more flavourful hits — all while preserving the Pivot’s pocketable form factor. 🧪 Choose Your Cooling: 3 Stem Options 🚀 The Puffco Pivot Evolution Stem This is your go-to for maximum dry cooling in the shortest possible space. The 2.5-inch Evolution Stem is filled with multicolour glass beads that increase the internal surface area, slowing vapour down and pulling heat from it before it reaches your lips. These beads act as both a heat sink and a vapour maze, giving you smoother hits without the need for water or bulk. Length: 2.5 inches Cooling Method: Multicolour glass bead fill Best for: Maximum dry cooling 🌵 The Puffco Pivot Cactus Stem Compact and clever, the Cactus Stem is just 1.5 inches long, making it the best choice for users who want to keep their Pivot ultra-portable. Inside, you’ll find three paired spike sets designed to break up vapour flow, forcing it throughout the stem for better cooling. It adds serious smoothness without greatly changing the form factor of your device. Length: 1.5 inches Cooling Method: Triple-spike vapour disruption Best for: Discreet cooling with minimal size increase 💧 The Puffco Pivot BubbleStem Looking for the ultimate in cool, smooth draws? The BubbleStem takes your Puffco Pivot and turns it into a mini water pipe. At 3.5 inches tall, it incorporates a small water chamber that acts like a portable bubbler. Just a bit of water makes a massive difference in reducing harshness and smoothing out every inhale — perfect for sensitive lungs or high-temp dabs. Height: 3.5 inches Cooling Method: Built-in water chamber Best for: Maximum cooling and smoothness 📦 Features at a Glance: All stems fit securely under the Puffco Pivot lid system Zero tools or mods required — install in seconds Enhanced vapour cooling without sacrificing portability Made from durable, high-quality borosilicate glass Compatible with all Puffco Pivot units 🚀 Why It Matters The Puffco Pivot is already an elite portable concentrate device — but adding a glass stem upgrades the experience dramatically. Whether you're looking for a subtle cooling boost or full-blown water filtration, this trio of stems gives you options to customize your draw and enhance your flavour. Don’t settle for harsh hits — upgrade your Pivot with the glass stem that fits your style.

Read more less

The Triple Play Pipe – A Classic Shape With a Functional Twist Meet the Triple Play Pipe: a familiar favourite reimagined with a subtle yet powerful design upgrade. This is the kind of water pipe that feels instantly familiar — but delivers more flavour, more cooling, and more compatibility with your favourite setups. Whether you’re using a vaporizer with a 14mm water pipe adapter or just love the smooth chug of a great piece, this one’s built for performance. 🔹 Classic Bong Shape – Modern Function Standing at a compact 10 inches tall, the Triple Play Pipe sports a time-tested silhouette: a broad cone-shaped base for water volume, leading up to a slightly flared comfort-fit mouthpiece. Not too big, not too tight — just right for easy draws and flavour-packed sessions. 🔹 Built for Vaporizers and Adapters This pipe features an 18mm joint with a 14mm downstem, giving you broad compatibility across most 14mm water pipe adapters used in the vaporizer world. If your vape has a WPA, chances are this piece is plug-and-play. 🔹 The Iconic Chug – With Airflow Upgrades At the base of the removable downstem, you’ll find a 6-slit classic tube percolator — a tried-and-true design that gives you that deep, familiar bong rumble with a touch of extra airflow. The added side slits help open up the pull, balancing backpressure with satisfying diffusion. 🔹 Triple Chamber Splash Protection What sets the Triple Play Pipe apart is its upper section. Nestled between the water reservoir and the mouthpiece is a visually striking triple-glass splash catcher. This triple-tiered structure doesn’t just look cool — it actively reduces water splashback, keeping your lips dry and your session clean. It’s a rare blend of form and function in one smooth piece. 🔹 Designed for Ball Vapes – But Great With Any Setup If you’re using a ball vape or another high-performance desktop vaporizer, you’ll appreciate the cooling capacity here. The large base holds enough water for heat dissipation, while the airflow and percolation aren’t so intense that they mute flavour. It’s the sweet spot between smooth and tasty. 📦 Features at a Glance: Height: 10” tall Joint: 18mm female with included 14mm downstem Percolator: Classic tube-style with 6 diffusion slits Unique triple-glass splash catcher section Cone-style base holds solid water volume for cooling Comfort-fit mouthpiece Compatible with 14mm water pipe adapters Ideal for use with vaporizers 🚀 Final Thoughts The Triple Play Pipe is exactly what it sounds like — a three-way win: iconic design, vaporizer compatibility, and standout splash control. Whether you’re upgrading your setup or adding a new daily driver to your rotation, this piece delivers classic function with a premium touch.

Read more less

The Natural Kit – All-Glass Ball Vape System by Vapvana 🔥 The Pinnacle of Purity – No Metal, No Compromise If you’re the kind of person who wants the best, then this is the kit for you. The Natural Kit from Vapvana isn’t just another Ball Vape—it’s a statement. Featuring a completely metal-free vapor path made entirely of quartz and sapphire, this is the first of its kind. From the injector housing to the glass bowl, The Natural delivers ultra-clean flavour in an all-in-one, no-missing-parts setup designed for those who truly know what they’re looking for. 💨 Why Choose The Natural Kit? 100% Quartz + Sapphire Heating Engine – Zero metal. All glass. Just pure thermal extraction. Complete Connoisseur-Grade Kit – Includes every single part you need (except water piece & flower). Precision PID Controller – Dial in your exact temp with confidence. Concentrate-Ready – Includes a full quartz banger setup with spinner action. Wooden Dugout Dock – Keeps your station clean, organized, and ready for launch. ⚙️ Kit Contents The Natural Heater – 18mm Quartz Injector housing with ~205 sapphire pearls, threaded lid, and quartz handle All-Glass Backstop Bowl – Built-in 10mm adapter and dry catch PID Temperature Controller – For total heat control Power Cable – 110v for North American systems Dugout Dock – Solid wooden base for controller, coil, and tools 20mm Hot Hole Coil – Delivers powerful, stable heat Heater Stand Post (with Glass Insert) – Keeps the quartz heater safely parked Quartz Banger Set – 20mm auto spinner with 8mm pearl and marble cap Tools Included – Scoop + brush = ready for game time BONUS: Early orders include a FREE Basic Glass Injector Bowl 🎯 Who Is This Kit For? Connoisseurs who crave the cleanest flavour possible Ball Vape enthusiasts who want an all-in-one setup Users ready to ditch metal and embrace full quartz & sapphire performance Anyone who appreciates great design and organized function 🧠 FAQ Q: Does this kit include everything I need to get started? A: Yes—everything except your water pipe and herb. You’re fully loaded with tools, heat system, bowls, and concentrate gear. Q: Is the heater pathway 100% metal-free? A: Yes. The heater is built entirely from quartz and sapphire—no metal at all in the airpath or engine design. Q: Can I use this with concentrates? A: Absolutely. The kit includes a quartz banger set specifically for concentrate use. Q: How does the flavour compare to other Ball Vapes? A: With no metal in the mix and full quartz & sapphire internals, The Natural delivers a noticeably cleaner, purer flavourthan standard setups. 🏆 Step Up to The Natural The Natural Kit isn’t for everyone—it’s for those who know exactly what they want. No plastic, no metal, no weak links—just full flavour and flawless function. If you’ve been waiting for the ultimate glass-on-glass Ball Vape experience, this is it. Read our full review of the VapVana Natural here.

Read more less

DynaVap G3 – Battery-Free Glass Vaporizer for Dry Herb The Purest Way to Vape, Now Under $50 Experience Thermal Freedom No batteries. No buttons. No nonsense. The DynaVap G3 brings back the joy of pure, direct vaporization—with just a flame and a flick of the wrist. Built around the power of thermal extraction, this all-glass portable vaporizer delivers rich flavour and smooth hits in seconds. Whether you're a microdoser, minimalist, or just tired of charging, the G3 keeps it simple without cutting corners. Why Choose the G3? Battery-Free by Design – Heat it with a torch - no cables, no chargers, no waiting. Glass-on-Glass Purity – A unibody stem and tip combo built from quality glass for clean flavour and easy maintenance. Captive Cap Technology – Audible “click” lets you know exactly when it’s ready—no guesswork, no overheating. Tri-Lobe Stem – Anti-roll design keeps your G3 from slipping off the table and onto the floor. Pocket-Sized Efficiency – The G3 tin case fits anywhere. Just toss it in your pocket, heat it up, and go. Simplify Your Session Load the chamber with just a pinch - around 0.05g is all it takes. Then cap it, heat it, and inhale. The G3’s click-to-vape system means you don’t need to guess when it’s ready. It’s fast, efficient, and designed to stretch your herb further than you thought possible. Want a stronger hit? Just let it soak up a few more seconds of heat, then ride the clouds. What’s in the Box? 1 × G3 Glass UniBody (tip + stem) 1 × Stainless Steel Captive Cap 1 × Slim Metal Storage Tin Recommended Tips Heat the cap evenly near the tip until you hear the first “click.” Inhale slowly for best vapour density and flavour. Listen for the second “click” to know when it’s cooling down. For stronger hits, heat for an extra second or two after the first click. Lightweight. Portable. Powerful. The DynaVap G3 isn’t just a budget-friendly entry into the world of dry herb vaporization - it’s a fully capable, highly efficient tool in a glass package. Whether you’re new to vaping or just want something simple and effective, this is one of the best value buys under $50. Perfect For: Anyone new to vaporizing looking for an easy entry point Fans of clean flavour and full manual control Microdosers and budget-conscious users People who hate charging and just want to heat and go Ready to Cut the Cord? Step away from batteries and into total control. The DynaVap G3 is your new go-to for flavourful, on-demand thermal extraction—whenever and wherever you want it. No batteries. No limits. Just glass, flame, and performance. Read our full review of the DynaVap G3 here.

Read more less

Camouflet Super Capacitor The Ultimate Upgrade for XL Performance The Super Capacitor is the enhanced heating powerhouse for the Convector XL and Ceramo XL. Built from pure stainless steel and packed with quadruple the thermal mass, it delivers unmatched heat retention, increased extraction, and smoother sessions — even with a torch. Key Features: 100% Stainless Steel Construction – Designed for optimal induction compatibility and long-lasting durability 4x the Thermal Mass – Retains heat far longer for extended sessions and back-to-back hits without reheating Expanded Heating Matrix – More internal plates deliver deeper, more complete extraction Compatible with Convector XL & Ceramo XL – Plug-and-play with your existing Camouflet XL gear Forgiving Heat-Up – Easier for torch users with more margin for error and longer heat windows Why Choose the Super Capacitor? This is the biggest and most capable heater in Camouflet's lineup. Whether you’re just entering the battery-free vaporizer world or looking to push your XL rig further, the Super Capacitor gives you longer sessions, more consistent vapour, and higher extraction efficiency — all with less precision required. It’s a smoother ride with much more horsepower. Heat it with any source, but for best results, we recommend pairing it with Camouflet’s Inductor. Includes: 1x Super Capacitor Compatible With: Convector XL Ceramo XL

Read more less

Ceramo XL – The Pinnacle of Battery-Free Convection Welcome to a new standard in dry herb vaporization. The Ceramo XL is a precision-engineered convection device built for purists who value clean flavour, efficient extraction, and rock-solid durability. It’s designed to outperform traditional vaporizers — all without batteries or electronics. One-Piece Zirconia Construction The Ceramo XL is machined from a solid block of black zirconia — a tough, heat-resistant ceramic known for its stability and neutral flavour. Its friction-fit screen and no-o-ring design reduces maintenance and keeps performance consistent session after session. Designed for Performance, Built to Last Ceramic Airpath – Smooth airflow with minimal heat soak or flavour distortion Ultra-High-Flow (UHF) Stem – Built for strong, easy draws and fast clearing Heater Plate Matrix – Optimized for deep, even convection extraction 0.2g Chamber Capacity – Wide and shallow for easy loading and quick clearing 14mm Male Taper – Compatible with your favourite glass pieces Replaceable Metal Screen – Friction-fit for easy cleaning or swapping How to Use the Ceramo XL Loosely fill the chamber with a medium grind of dry herb. Place the XL Camo Cap onto the heater end of the device. Apply heat to the tip using a torch or the Inductor. Heat for 4–7 seconds (Inductor) or 7–15 seconds (torch). Inhale gently from the stem. Rotate and reheat for 2–3 cycles to fully extract your material. What’s Included 1 x Ceramo XL (Black Zirconia) 1 x XL Camo Cap 1 x Replaceable Metal Chamber Screen 1 x Bambox Storage Case 1 x Burner Torch Lighter 1 x Cap Adjustment Tool Inspired by the Convector XL The Ceramo XL expands on the proven design of the Convector XL, delivering even greater airflow, upgraded materials, and a simplified, o-ring-free structure. It retains the trusted heater matrix and 14mm taper while pushing flavour and form to the next level. Why Choose Ceramo XL? Ceramic Airpath – Smooth flavour and high heat resistance Low Maintenance – No o-rings or fragile seals Fast Extraction – Full sessions in 2–3 heat cycles Glass Ready – 14mm taper fits water pieces right out of the box If you’re ready for high-performance convection without batteries or complexity, the Ceramo XL is your next move.

Read more less

Extra Large Chill Ice Cube Tray Set The ultimate ice solution for your Chill Steel Pipe. This custom-moulded tray is designed to create the largest possible ice cubes that will still fit perfectly inside your Chill Pipe — no wasted space, no compromises. Made Specifically for Chill Steel Pipes Each tray produces seven extra-large cubes engineered to match the internal dimensions of your Chill Pipe. That means you get maximum ice volume for a longer-lasting chill — keeping your water icy cold for up to 24 hours. Why Use This Instead of Regular Ice? Perfect Fit — No jamming or melting cubes to make it work Maximum Chill — Fills the pipe with ice for extended cooling Purpose-Built — Designed for your Chill, not your cocktail A Must-Have Accessory Using regular freezer ice just doesn't cut it. With this tray, you're always ready to load up your Chill Pipe with precision-sized cubes that perform better and last longer. It’s the easiest upgrade you'll ever make. What’s Included: 1 x Extra Large Ice Cube Tray (7 cube capacity) Made from durable, food-safe silicone Upgrade your Chill experience with the ice tray designed to match it — because Chill deserves better than standard cubes.

Read more less

The Everything Bowl – 3-in-1 Glass Injector Bowl, Dry Catcher, and Pass-Through Adaptor Is it a bowl? A dry catcher? A pass-through adaptor? Yes. It’s all of the above. Introducing The Everything Bowl — a clever 3-in-1 accessory that combines the essential functions of a glass injector bowl, a dry herb catcher, and a pass-through adaptor into one sleek, all-glass solution. Whether you’re chasing flavour, easier cleaning, or safer sessions, The Everything Bowl is designed to simplify and elevate your setup. One Piece, Three Purposes Glass Injector Bowl – Enjoy clean, flavourful vapour thanks to the glass design. Compatible with most major injector-style vaporisers on the market. Integrated Dry Herb Catcher – Catches loose flower before it hits your bubbler, keeping your water piece much cleaner, for much longer. 10mm Pass-Through Adaptor – Remove the included glass stopper and clear your piece easily without removing your vaporizer. Safer, faster, and smoother. Why Use The Everything Bowl? If you’re tired of stacking multiple glass pieces to get the perfect setup, this is your answer. The Everything Bowl simplifies your routine while still delivering elite performance. It’s the kind of accessory you don’t realise you need—until you use it once. Key Benefits Reduces mess and cleaning by stopping dry herb before it hits your water. Improves safety by letting you clear your piece without touching the hot vape. Delivers pure glass flavour in a streamlined, all-in-one accessory. Compatible With: Popular injector-style vaporizers 14mm female water pieces Included: 1x Everything Bowl (with integrated glass herb catcher) 1x Glass stopper (10mm male) Simple. Smart. Everything You Need. Whether you’re just getting into injector-style setups or you're deep into the hobby, The Everything Bowl is the glass piece that ties it all together. Save space, reduce hassle, and get cleaner, smoother sessions—every time.

Read more less

Wireless One Hit Wonder (WOHW) – Premium Wireless Ball Vape Kit The Best Wireless Desktop Vaporizer for Dry Herb The Wireless One Hit Wonder (WOHW) by Crossing Tech is the ultimate wireless ball vape for dry herb. The WOHW delivers incredible flavour, huge vapour production, and ultra-smooth airflow—all without the mess of cords. It’s a compact, powerful solution for anyone who wants a high-end experience with none of the hassle. Why Choose the Wireless One Hit Wonder? Wireless Ball Vape Power – Enjoy desktop performance with cordless convenience. Dual-Use Housing – Use as either an injector or diffuser-style vape with the included Titanium Matrix Bowl. Ruby-Filled Titanium Head – Packed with 520 precision-cut rubies for consistent heat retention and dense vapour output. Hybrid Heating – Combine convection and conduction for intense, flavorful extractions. All-in-One Base – Includes a coil guard, tool storage, and built-in wire wrap system for a clean setup. Optimized for Versatility Switch effortlessly between injector and diffuser modes. The included Titanium Matrix Bowl works perfectly in both configurations, and the housing is also compatible with the many popular glass ball vape bowls for users who prefer a glass setup. Efficient, Thoughtful Design Compact, Low-Footprint Build – Perfect for home or group sessions. Heat Guard Protection – Shields the coil and provides extra safety during sessions. Custom Coil Base – Machined storage holes for bowls, tools, and a built-in wire tidy system. Recommended Usage Tips Set the PID controller to 535°F for a great starting point, and adjust temperature suited to your preference. Let the unit heat for 5 minutes to allow full heat soak. To maximize hybrid extraction, heat your bowl upside-down on the injector side before use. The WOHW works exceptionally well with dry herb and can also be effective with hash when used with a double screen or a bit of herb as a base. What's Included in the Full Kit 1x WOHW Stand with Grippy Feet Installed 1x 25mm Barrel Style Heater Coil 1x Classic PID Controller 1x WOHW Titanium Head with Ruby Gemstones Installed 1x Titanium Matrix Bowl with 14mm Male Glass Joint 1x 18mm Glass Joint for Matrix Bowl 1x Screen Pack for Matrix Bowl 2x Replacement O-rings for Matrix Bowl 1x SQP Herb Scoop & Tamper Tool 1x Cleaning Brush 1x Allen Key (for coil installation) 1x Instruction Sheet Warranty & Support 1-Year Manufacturer Warranty on PID Controller and Heater Coil Please note: while the housing is wireless, the PID controller must be plugged into a power source. Frequently Asked Questions (FAQ) Is this a true wireless vaporizer? The heater housing operates wirelessly while docked on the base, but the PID controller does require a wall plug to operate. Can I use concentrates with this setup? While this kit is optimized for dry herb, it can be adapted for concentrates with a 25mm quartz banger (sold separately). What temperature should I start at? We recommend starting at 535°F and adjusting based on your preference. Let the unit heat soak for about 5 minutes for best results. Is this setup beginner friendly? Yes! The WOHW is straightforward to use with a detailed instruction sheet included. It's great for beginners and power users alike. What’s the difference between injector and diffuser modes? Injector mode delivers pure convection hits, while diffuser mode offers a hybrid experience by heating the bowl as well as the air. You can switch modes based on your extraction preference. Ready to Upgrade Your Desktop Vape Game? Say goodbye to cords and compromises. The Wireless One Hit Wonder offers elite performance, hybrid flexibility, and modern convenience—all in one compact kit. This is the most powerful wireless dry herb vaporizer on the market today. Read our full WOHW review here.

Read more less

Cooler Vapour. Smoother Dabs. Total Customization. The Box by LidaVel is a next-level cooling solution designed for vaporizer and dab enthusiasts who want smoother, colder hits without compromising flavour. Using patented electronic cooling technology, The Box chills your vapour or dabs to ice-cold temperatures within minutes — enhancing comfort, preserving terpenes, and reducing throat irritation. Whether you're running a heavy rig or a portable vape, The Box pairs effortlessly with 14mm glass for a fully customizable, high-performance experience. Built from premium materials and engineered to last, it's the perfect upgrade to take your sessions to the next level. Key Features Electronic Cooling System: Cools down in 2–5 minutes, maintaining a consistent chilled experience throughout your session. 14mm Compatibility: Works with most dab rigs, vaporizers, and water tools using standard 14mm connections. Easy to Clean: Easy open glass cover and included tools make routine maintenance simple and fast. Durable & Safe Materials: German borosilicate glass, food-grade aluminum, and medical-grade silicone construction. Low-Key Design: Subtle aesthetics with luxury vibes — looks as good as it hits. What’s Included Patented Electronic Cooling System Removable Glass Cover 1x Bowl XL - 14mm 1x Down Stem 2x Hookah Hoses (0.5m & 1m) 2x 14mm Adapters for Hookah Hose 2x Cleaning Corks for Hookah Hose 1x Handle for Hookah Hose 1x 14mm to 14mm Glass Adapter 1x Cleaning Tool for The Box and Down Stem 1x Cleaning Tool for Bowl Piece 1x Power Supply Cord 1x Box Tray Frequently Asked Questions How does The Box cool vapour and dabs? It uses patented electronic cooling to rapidly reduce vapour temperature, delivering smoother, more comfortable inhales with better terpene retention. Is it compatible with all vaporizers? The Box works with any 14mm compatible device — most desktop and portable vaporizers, dab rigs, and water pipes. Is it easy to clean? Yes. The removable glass cover and included tools make it easy to clean after heavy use. What is it made from? Premium materials including German borosilicate glass, food-grade aluminum, and medical-grade silicone. What’s the warranty? Every unit comes with a 5-year service warranty for peace of mind. Upgrade Your Vapour Sessions If you take your dabs or vapour seriously, The Box is the cooling upgrade you didn’t know you needed. Add it to your setup today and experience flavour, comfort, and smoothness on a whole new level. See our full review of The Box by LidaVel here.

Read more less

Volcano Balloon with Adapter The Volcano Balloon with Adapter is a convenient replacement accessory designed for the iconic Volcano Classic and Hybrid vaporizers. Whether your old bag is worn out or you're just looking for a fresh experience, this single balloon setup is the easiest way to restore top-tier performance and flavour to your device. Convenient Single-Bag Option Gone are the days of having to buy a full set. Now available individually, this single Volcano balloon is perfect for solo users or anyone who just needs one high-quality bag. It’s an ideal choice for those who want to minimize waste, save money, and keep their setup simple. Maintain Peak Flavour and Performance Over time, vapour residue builds up and can affect both taste and vapour quality. Replacing your balloon is one of the easiest and most effective ways to maintain your Volcano’s legendary performance. A fresh balloon ensures you’re getting the cleanest, most flavourful vapour possible—exactly what the Volcano is known for. Fits Volcano Classic and Hybrid This balloon is compatible with both the Volcano Classic and Volcano Hybrid models. It comes preassembled with the adapter for fast, hassle-free setup—just connect it and you’re ready to go. Key Features Includes: 1 x Volcano Balloon with Adapter Compatible with: Volcano Classic, Volcano Hybrid Preassembled for easy use Helps maintain optimal vapour quality Ideal for solo or occasional users Why Replace Your Volcano Balloon? The Volcano is one of the most respected desktop vaporizers on the market, and regular maintenance is key to keeping it running at its best. Replacing your balloon periodically ensures your vapour stays smooth, clean, and flavourful. It's a small step that makes a big difference. Get the Most Out of Your Volcano If you want to experience your dry herb the way it was meant to taste, start with a fresh balloon. This affordable single option makes it easy to stay on top of maintenance without overbuying or creating waste.

Read more less