The Vices Adaptaball Kit is a fully modular ball vape system designed to give you complete control over how your sessions feel, perform, and evolve over time. Built around flexibility, this is a ball vape that adapts to you — not the other way around.
Constructed from Grade 2 titanium with a distinctive octagonal head and unique pentagram airflow pattern, the Adaptaball delivers strong performance, customizable airflow, and a wide range of configurations — all in one complete kit.
A Ball Vape That Adapts to You
Most ball vapes lock you into a single experience. The Adaptaball does the opposite. It is designed as a modular system where you can change heads, internals, and bowl configurations to create completely different results from the same setup.
Whether you are just getting into ball vapes or looking for something more flexible, the Adaptaball offers a full-spectrum experience without needing multiple devices.
Injector vs Diffuser Mode
The Adaptaball gives you two distinct ball vape styles in one system:
Injector Mode - A convection-style ball vape experience with even heat distribution and more flavour-forward results
Diffuser Mode - A more aggressive, conduction-style hit designed to feel closer to traditional combustion
Swapping between modes is simple and gives you two completely different ways to use the same ball vape.
Customizable Ball Vape Internals
The Adaptaball includes three internal options, each changing how the ball vape performs:
Zirconia Balls - Best for lower-temp, flavour-focused sessions
Stainless Steel Star Coins - Maximum heat retention for heavier hits
Ruby Gem Mix - Balanced performance across a wide range of temperatures
This lets you fine tune your ball vape experience instead of being locked into one heating style.
The Adaptabowl System
The Adaptabowl takes things further by letting you customize bowl size and usage within the same setup:
Everlasting Titanium Screens - Reusable and durable with no need for replacements
Microdose Cup - Ideal for smaller, more controlled sessions
Large Diffuser Cup - Increased capacity for bigger hits
This makes the Adaptaball one of the most flexible ball vape systems available when it comes to load size and session style.
Advanced Airflow Design
The titanium head features a unique pentagram airflow pattern based on the golden ratio. This design helps create balanced airflow and even heat distribution across your material.
The result is a ball vape that feels consistent, efficient, and highly responsive no matter how you configure it.
Built for Versatility and Value
The Adaptaball focuses on three core advantages:
Versatility - Multiple ball vape styles in one system
Reusability - Clean and reuse components instead of replacing them
Expandability - Part of the Vices ecosystem for future upgrades
Instead of buying multiple setups, you get one ball vape platform that can evolve with your preferences.
Key Features
Modular ball vape system with multiple configurations
Grade 2 titanium construction for durability and performance
Injector and diffuser modes for different extraction styles
Customizable internals for flavour or intensity
Adaptabowl system with microdose and large capacity options
Pentagram airflow design for balanced heat distribution
Wireless-ready setup with included dock and coil
What’s Included
Adaptaball Heater
Diffuser attachment
Injector attachment
Vices Aluminium Wireless Dock
25mm 8-wrap Axial Coil
Titanium Adaptabowl (14mm and 18mm compatible)
Classic Single PID with power cable
Scoop and tamp tool
Cleaning brush
2 x Everlasting Titanium Screens
Large Titanium Cup
Micro-dose Titanium Cup
3 x Internal options (Zirconia, Ruby, Star Coins)
Allen key for docking station
Final Thoughts
The Vices Adaptaball Kit is one of the most versatile ball vape systems available. It is built for users who want control, flexibility, and long-term value in a single setup. One kit, endless possibilities.
DynaVap UniDyn Captive is a premium titanium thermal extraction device built around a fully integrated UniBody design. By combining the tip and stem into one precision-machined titanium component, the UniDyn Captive reduces parts, simplifies maintenance, and delivers a clean, efficient experience with the reliable click-based heating DynaVap is known for.
Finished with DynaVap’s durable DuraDyn coating and engineered with T-Break heat break technology, the UniDyn Captive is designed to reduce heat transfer up the body for a more comfortable grip during use. Add in adjustable airflow, microdose flexibility, and direct 10mm glass compatibility, and you get a device that feels refined, versatile, and built to last.
Why the DynaVap UniDyn Captive Stands Out
The UniDyn Captive takes the classic DynaVap concept and modernizes it with an all-in-one titanium UniBody. Fewer components means fewer failure points, easier cleaning, and a more seamless overall feel. With only two O-rings in the entire device, this is one of the simplest and most durable DynaVap builds to date.
Integrated Titanium UniBody Design
The standout feature here is the single-piece titanium UniBody. Instead of a separate tip and stem setup, the UniDyn Captive integrates both into one lightweight and highly durable structure. This gives the device a solid, premium feel while also improving long-term reliability.
Titanium keeps the device light in hand, resistant to corrosion, and highly responsive in daily use. The result is a streamlined thermal extraction device that feels elegant, efficient, and purpose-built.
DuraDyn Finish and T-Break Technology
The scratch-resistant DuraDyn finish helps protect the exterior while adding grip and a clean, modern look. Internally, T-Break heat break technology helps reduce the amount of heat travelling up the body, making the UniDyn Captive more comfortable to hold through repeated heat cycles.
For anyone who values both performance and handling comfort, this is a meaningful upgrade that improves the overall experience without adding unnecessary complexity.
Adjustable Airflow with 7 Settings
The UniDyn Captive includes an adjustable condenser system with 7 airflow settings. This lets you fine tune the draw to match your preferred session style, whether you want lighter flavour-focused pulls or denser, more thorough extraction.
Combined with the airport, the airflow system gives you more control over resistance, vapour density, and pacing. It is a flexible setup that rewards experimentation and lets you dial in the experience to suit your preferences.
Microdose Flexibility with Adjust-a-Bowl
DynaVap’s Adjust-a-Bowl system makes it easy to switch between a full chamber and a reduced microdose setting. The full bowl holds approximately 0.1g, while the smaller setting comes in around 0.05g.
This makes the UniDyn Captive a great option for efficient solo use, lighter sessions, or anyone who wants the flexibility to get more out of less material without changing devices.
Direct 10mm Glass Compatibility
The tapered mouthpiece fits directly into 10mm glass, making it easy to pair the UniDyn Captive with your favourite water piece for a cooler and smoother experience. No extra adapter is required, which keeps the setup simple and travel-friendly.
If you already enjoy using compact glass pieces, this built-in compatibility adds even more versatility to an already well-rounded device.
Key Features
Integrated titanium UniBody - tip and stem combined into one seamless component
DuraDyn finish - scratch-resistant surface for added durability and grip
T-Break heat break technology - helps reduce heat transfer for more comfortable handling
7 airflow settings - adjustable condenser for personalized draw control
Adjust-a-Bowl system - supports both full sessions and efficient microdosing
10mm glass compatibility - tapered mouthpiece fits directly into compatible glass
Minimal maintenance design - only two O-rings in the entire device
Manual thermal extraction - compatible with torch heating or induction heaters
What’s Included
DynaVap Signature Captive Cap
UniDyn Titanium UniBody Tip and Stem
Stainless Steel CCD Screen
Titanium Condenser Assembly
High Temperature O-Rings (2)
DynaVap Tin Storage Case
Pink Slip
How to Use the DynaVap UniDyn Captive
Remove the Captive Cap and load your material into the chamber.
Replace the Cap and apply heat with a torch or induction heater until you hear the click.
Inhale through the mouthpiece while using the airport to adjust airflow as desired.
Wait for the cool-down click before reheating for the next cycle.
Who Is the UniDyn Captive For?
The DynaVap UniDyn Captive is a strong choice for anyone looking for a durable, flavour-focused manual device with fewer parts and more flexibility. It will especially appeal to longtime DynaVap users who want a more refined titanium design, as well as newer users interested in microdosing, adjustable airflow, and easy glass pairing.
Why Buy the DynaVap UniDyn Captive from Great White North Vaporizer Company?
At Great White North Vaporizer Company, we focus on carrying proven devices, trusted accessories, and premium upgrades for enthusiasts across Canada and beyond. If you are looking for authentic DynaVap gear, knowledgeable service, and a curated selection of performance-focused products, you are in the right place.
Arizer Go SRT Portable Vaporizer - Glass Flavour, Faster Heat-Up, Smarter Portable Design
The Arizer Go SRT is a premium portable vaporizer built around a glass vapour path, hybrid heating, and Arizer’s new SRT operating system. It combines the flavour-first identity Arizer is known for with faster heat-up, stronger extraction, and a more refined on-the-go design.
Overview
The Arizer Go SRT feels like the original ArGo and the Solo 3 had a baby. It keeps the clean, glass-first Arizer session style people already love, but adds a noticeable step up in performance, responsiveness, and overall refinement. Compared to the original ArGo, the Go SRT is larger and heavier, but it also feels far more substantial, more modern, and much more capable.
At its core, the Go SRT is a portable dry herb vaporizer designed for users who want strong flavour, precise control, and genuinely useful portability. The new SRT operating system gives it faster heat-up and steadier session performance, while the hybrid heater leans heavily toward convection for clean flavour with better early-session vapour production.
Arizer has also added a completely new Go Shell pod system for cleaner reloads and easier pre-packing on the go, along with a 14mm water pipe adapter, a bright full-colour screen, USB-C fast charging, and three editable presets. The result is one of the most complete portable vaporizers Arizer has released to date.
Why the Arizer Go SRT Stands Out
Glass Vapour Path - maintains the clean, pure flavour Arizer fans expect.
SRT Operating System - delivers faster heat-up and a more responsive, modern session style.
Hybrid Heating Chamber - approximately 75% convection and 25% conduction for flavour with stronger early extraction.
Go Shell Pod System - glass-based pre-load system for cleaner prep and easier reloads.
14mm Water Pipe Adapter Included - excellent for higher-temperature sessions and smoother inhalation.
3 Editable Presets - save your preferred temperature and session length combinations.
Precise Temperature Control - adjustable from 50°C to 220°C in 1°C increments.
USB-C Fast Charging - quick top-ups with pass-through charging support.
Eco Charging Mode - charges to 80% by default to support long-term battery health.
On-The-Go Cap - magnetic cap protects the short stem during travel.
Build Quality, Size & Materials
The Go SRT is clearly aimed at users who want something more premium than the original ArGo. With the short stem and magnetic cap installed, it comes in at roughly 242 to 250 grams and measures about 110mm tall, 60mm wide, and 30mm deep. That makes it larger than the original Go, but still very much portable enough for a pocket, jacket, bag, or everyday carry.
The body uses a mostly metal construction with plastic and silicone in the places where those materials actually improve usability. The result is a device that feels solid, well-finished, and much more high-end in the hand than earlier Arizer portables. The glass stems fit snugly, the magnetic connections are strong, and the recessed stem design does a very good job protecting the glass during normal travel.
The included magnetic travel cap is one of the most practical parts of the design. It lets you keep the short glass stem installed while protecting it in transit, and it can also attach to the bottom of the device when removed. The front of the unit houses three buttons and a small full-colour display that is bright, simple to read, and surprisingly customizable.
How the Arizer Go SRT Works
The Go SRT is built around a hybrid heating system that leans heavily toward convection. Arizer’s design uses roughly 75% convection and 25% conduction, which helps preserve flavour while also giving the session a quicker start and more consistent output from the first draw onward.
Unlike older Arizer portables that feel more traditional and slow-building, the Go SRT is tuned to feel faster and more responsive. You can use it with the standard glass stem setup or with the new Go Shells, which function like glass dosing pods. Once loaded, the device heats quickly, visually shows heat progress on screen, and then keeps session timing and residual heat easy to track through the bar system.
As the unit heats, the five bars on the display fill and turn orange. Once all five bars are lit, you are at temperature. When those orange bars begin to disappear, you are still at full heat - that portion of the display is simply showing the countdown of your active session. After that, white residual heat bars appear and gradually fade to grey, showing how much usable heat remains after the timed session ends.
Vapour Quality
The Arizer Go SRT vapour quality is one of its biggest strengths. At lower temperatures, it produces the kind of smooth, clean, terp-forward flavour Arizer is known for. At higher temperatures, it becomes surprisingly punchy for a portable of this size, especially through glass.
Below about 380°F, flavour is excellent and tends to stay enjoyable across multiple draws. Around 390°F, you get a nice balance of flavour and vapour density. Once you move into the 405°F to 428°F range, the Go SRT produces much thicker vapour and a stronger extraction profile, with the 14mm water pipe adapter becoming especially useful for smoothing out those hotter sessions.
The SRT tuning helps the device start producing vapour quickly after it reaches temperature, but like many devices in this category, the second draw is often thicker than the first as the load continues to heat and saturate. Overall, the Go SRT does an excellent job balancing flavour, consistency, and cloud production without losing the core Arizer identity.
Go Shell Pod System
The Go Shell system is one of the biggest changes Arizer has made here. These small glass pod-style shells let you preload your material, keep the chamber cleaner, and swap bowls more easily when you are out and about. It gives the Go SRT a more organized, more travel-friendly workflow than most previous Arizer portables.
For many users, this will be a major convenience upgrade. The shells work well, preserve excellent flavour, and make the device feel more flexible in portable use. The included silicone grips are also smartly designed, since they help remove hot shells safely and can double as a tamping tool during loading.
The one trade-off is that the shell design is somewhat fiddly compared to more traditional capsule systems. The fine metal screen does not lock into place, so you need to be a little more deliberate when loading and emptying them. Once packed properly, the system works well, but it is a learning curve compared to a simple fixed-screen design.
Temperature Control & Presets
The Go SRT offers a full temperature range of 50°C to 220°C or 122°F to 428°F, adjustable in precise 1-degree increments. That level of control makes it easy to fine-tune sessions for lighter flavour-focused draws or stronger, denser extraction.
Instead of forcing you to scroll through the full temperature range every time, Arizer built the interface around three editable presets. Each preset stores both a target temperature and a heating session length, which can be set anywhere from 20 seconds up to 5 minutes. That allows you to tailor the device toward a quick-hit style, a more traditional session style, or a stepped progression across multiple presets.
The Go SRT also includes a long list of quality-of-life settings, including screen inversion, brightness, sound, vibration, temperature units, overall shutoff timer, and lock control. Once you spend a bit of time with it, the interface is straightforward, flexible, and far more customizable than many portables in this class.
Battery Life & Charging
The Go SRT uses a 5000mAh battery and offers solid real-world performance for its size. In practical use, you can expect roughly 8 to 12 sessions per charge, with many users landing around 10 sessions or about 50 to 53 minutes of runtime depending on temperature, session length, and how often the device has to heat from cold.
Charging is handled via USB-C, with fast charging support that can add roughly 20% battery in about 15 minutes. A full charge takes around 2 hours, and the device supports pass-through charging, so it can still be used while plugged in.
Out of the box, the Go SRT ships with Eco Charging enabled, which caps charging at 80% to help preserve long-term battery health. If you want a full 100% charge, simply hold the up button while charging. The battery is not hot-swappable, but it is user-replaceable with basic tools, which is a welcome middle ground between disposable sealed-battery designs and full removable battery systems.
Portable Use & Water Pipe Compatibility
Arizer has not built the Go SRT to be the smallest device in your pocket. Instead, they have built it to be one of the most complete. It is still highly portable, but with enough power, structure, and accessory support to work as a true everyday main device.
The recessed stem design, magnetic travel cap, and Go Shell workflow all make it much more realistic for use outside the house than earlier Arizer designs. It is not ultra-discreet, and it does push the upper end of what most people would call pocketable, but it is still easy to carry and use on the move.
The included 14mm water pipe adapter is another major plus. The Go SRT transitions very well to bubbler use, especially at higher temperatures where it can produce thick, satisfying clouds. The automatic screen inversion also keeps the display readable when the unit is used upside down on glass, which is a small feature but a genuinely useful one.
Quick Specs Table
Brand
Arizer
Country of Production
Canada
Release Year
2026
Compatibility
Dry Herb
Heating Style
Hybrid Heating - convection focused
Temperature Range
50°C to 220°C / 122°F to 428°F
Temperature Adjustment
1-degree increments
Heat-Up Time
Fast heat-up, typically around 15 to 25 seconds depending on settings and battery level
Battery Capacity
5000mAh
Charging
USB-C fast charging with pass-through support
Presets
3 editable presets
Session Timer
20 seconds to 5 minutes
Water Pipe Adapter
Included 14mm adapter
Dimensions
Approx. 110mm x 60mm x 30mm
Weight
Approx. 242g to 250g with stem and cap installed
What’s Included
1 x Arizer Go SRT
1 x On-The-Go Cap
1 x Go Shell with Grip & Cap
1 x Go Mouthpiece
1 x 14mm Go Water Pipe Adapter
1 x Go Glass Aroma Tube with Cap
2 x PVC Travel Tubes with Caps
1 x Bamboo Cleaning Brush
1 x Stainless Steel Stirring Tool
1 x USB-C to USB-C Charging Cable
5 x Go Filter Screens
FAQ - Arizer Go SRT
What makes the Arizer Go SRT different from the original ArGo?The Go SRT is larger and heavier, but it is also significantly more refined. It offers stronger build quality, faster heat-up, a more modern control system, a full-colour screen, and a much more powerful overall session.
Is the Arizer Go SRT a convection vaporizer?It uses a hybrid heating system that is primarily convection based, with roughly a 75% convection and 25% conduction balance.
Does the Arizer Go SRT have a glass vapour path?Yes. The Go SRT is designed around Arizer’s glass-first approach for clean flavour and a smooth session style.
Can I use the Arizer Go SRT through glass?Yes. It includes a 14mm water pipe adapter and works very well with water pieces, especially at higher temperature settings.
How long does the battery last?Battery life depends on temperature and session length, but around 8 to 12 sessions per charge is a realistic range, with many users seeing about 10 sessions.
Does the Arizer Go SRT have removable batteries?The battery is user-replaceable but not hot-swappable. You can change it with basic tools, but it is not designed for quick battery swaps on the go.
What are Go Shells?Go Shells are Arizer’s new pod-style glass loading system for the Go SRT. They let you preload sessions, reload more cleanly, and keep the oven tidier during portable use.
Is the Go SRT good for flavour?Yes. Flavour is one of its biggest strengths, especially at lower and mid-range temperatures where the glass path and convection-focused heater really shine.
Final Thoughts
The Arizer Go SRT portable vaporizer stands out because it delivers a rare balance of flavour, portability, control, and power. It is not the tiniest device in Arizer’s lineup, and it is not meant to replace a larger heavy-hitter like the Solo 3 for everyone, but it may be the best all-around portable Arizer has put together so far.
If you want a portable dry herb vaporizer with a more premium feel, faster heat-up, excellent flavour, flexible session controls, and better real-world travel usability than previous Arizer models, the Go SRT is an easy one to recommend.
Great White North Vaporizer Co. Canada - Canadian source for premium portable vaporizers, desktop units, and dry herb accessories.
For more information, read our full review of the Arizer Go SRT here.
Unplug your setup. The Wireless One Hit Wonder V2 (WOHW V2) delivers full desktop vaporizer performance without a cord attached to the heater. Enjoy thick clouds, rich flavour, and true hybrid heating in one clean modular system.
Sorry, your browser doesn’t support embedded videos.
See the Wireless One Hit Wonder V2 wireless ball vape in action. Full desktop power with no wire attached to the heater.
Overview
The Wireless One Hit Wonder V2 from Crossing Tech is a modular wireless ball vape desktop vaporizer designed to deliver powerful performance with a clean and simplified setup. The ruby-filled titanium heater head provides strong thermal mass and even heat distribution for thick, flavourful extraction.
You can run the system in pure convection injector mode or switch to hybrid diffuser mode using the included Matrix Titanium Bowl and diffuser adapters.
Ships from Canada 🇨🇦 with fast tracked shipping and knowledgeable customer support.
Why You’ll Love It
Wireless Ball Vape Design: True ball vape performance without a cord attached to the heater head.
Injector or Diffuser Flexibility: Enjoy clean convection hits or switch to diffuser mode for thicker hybrid extraction.
Ruby-Filled Titanium Heater Head: Dense thermal mass ensures consistent heat and strong extraction.
Solid Aluminum Dock: Secure resting base with integrated coil guard and tool storage.
Matrix Titanium Bowl System: Adjustable screens and diffuser adapters allow custom airflow and load size.
Designed for Performance
The WOHW V2 wireless ball vape is engineered for airflow efficiency, thermal stability, and simple real-world usability. The precision-machined titanium heater head maintains consistent heat across long sessions while the Matrix bowl system allows quick switching between injector and diffuser configurations.
The result is a desktop vaporizer that feels powerful, predictable, and refined on any glass setup.
Quick Start Tips
Burn-Off: Set your PID controller to 800°F and run the heater for 10 minutes before first use.
Starting Temperature: Begin between 535°F to 575°F and adjust based on airflow and load size.
Hybrid Mode: Preheat the bowl upside down on the injector before loading for thicker hybrid extraction.
Materials: Optimized for dry herb but can also be used with hash or small concentrate loads using a screen.
What’s Included
1 × Solid Aluminum Dock Station with coil guard and tool storage
1 × 25mm XL Barrel Heater Coil
1 × Classic PID Controller
1 × Titanium Heater Head filled with 3mm ruby balls
1 × Matrix Titanium Bowl with 14mm and 18mm glass joints
1 × 21.5mm Diffuser Adapter (preassembled)
1 × 22.15mm Diffuser Adapter Ring
2 × Flat Mesh Screens
1 × Adjustable Height Mesh Basket Screen
2 × Viton O-Rings
1 × Scoop & Tamper Tool
1 × Wooden Handle Cleaning Brush
1 × Power Cord
1 × Allen Key
1 × Instruction Sheet
Frequently Asked Questions
Is the WOHW V2 completely wireless?
The heater head operates wirelessly while resting on the dock. The PID controller still requires a power connection.
What is the difference between injector and diffuser mode?
Injector mode provides primarily convection heating for clean flavour. Diffuser mode introduces conductive heat for thicker hybrid extraction.
What temperature should I start at?
Most users begin between 535°F and 575°F after a full heat soak.
Can the WOHW V2 handle concentrates?
Yes. With a quartz banger or screened herb base the system can also be used with concentrates.
Is it beginner friendly?
Yes. The modular design makes setup straightforward and the included instructions walk you through the process.
Final Thoughts
The Wireless One Hit Wonder V2 is a powerful wireless desktop ball vape built for enthusiasts who want maximum performance without a cluttered setup. Whether you prefer flavour-focused convection or thick hybrid clouds, the WOHW V2 delivers a consistent and premium experience every session.
Read our full in-depth Wireless One Hit Wonder full review and demo here.
DynaVap VonG X — High-Mass Power Meets Precision Control
Engineered for serious performance, the DynaVap VonG X combines stainless-steel power, refined airflow, and unmatched versatility — all in one compact and durable design.
Overview
The VonG X represents DynaVap’s next evolution — a premium manual vapourizer designed for both water-piece users and flavour enthusiasts. With its heaviest-ever stainless-steel tip and titanium body, it delivers consistent extractions and rich, full-spectrum flavour that rival desktop units.
Compact, durable, and precisely adjustable, the VonG X defines portable performance.
Key Features & Upgrades
High-Mass Tip — stores and releases heat for massive, single-hit extractions.
Twist Airflow Control — fine-tune your draw with the new rotating mouthpiece.
Reversible Design — use traditionally or flip for a hands-free water-piece setup.
Hybrid Titanium & Stainless Build — rugged, lightweight, and built to last.
Dual Compatibility — fits both 10 mm & 14 mm female joints.
Adjust-a-Bowl Chamber — 0.1 g capacity, adjustable for microdosing.
Armoured Cap Compatible — pair with DynaVap’s Armoured Cap for maximum output.
Two-Tone DuraDyn Finish — matte ends with a polished midsection.
Heating Methods
The VonG X can be powered by either a butane torch or The Wand induction heater. A small torch provides manual control, while The Wand offers consistent, hands-free heating. Either way, the VonG X delivers clean, powerful vapour in seconds.
For stronger extractions, you can also heat directly on the tip instead of the cap to push heat deeper into the core. Just be cautious — this method transfers heat quickly.
Adjusting Airflow
Mouthpiece Control
Twist the mouthpiece to open or close the airflow window. The mechanism offers infinite variability — not simply on or off — allowing precise control over draw resistance and vapour density.
Condenser Adjustment
The condenser now connects directly to the tip, offering a second layer of airflow control. Push it closer to the mouthpiece for tighter resistance, or slide it toward the tip for a freer flow. Either way, airflow feels smooth and natural.
Reversible Setup for Water-Piece Use
One of the VonG X’s standout features is its reversible assembly. Swap the tip and mouthpiece to create a secure, hands-free connection to any 14 mm water piece. It’s flexibility and function combined — ideal for consistent, full-bodied hits.
Specifications
Length: 92 mm
Materials: Titanium & Stainless Steel
Bowl Capacity: ~0.1 g (Adjust-a-Bowl)
Heating Method: Torch or Induction
Compatibility: 10 mm & 14 mm female water-piece joints
Airflow Control: Twist mouthpiece + tip-mounted condenser
Finish: Two-tone DuraDyn (matte ends, polished midsection)
Included: VonG X Device, Captive Cap, O-rings, CCD Screen
How It Works
Lightly fill the chamber with ground material, ensuring open airflow. Heat the cap or tip evenly while rotating until the signature DynaVap click signals readiness. Draw directly or through your water piece — no batteries, no buttons, just pure mechanical precision.
The cap will click again when it cools, indicating it’s ready for another cycle.
Why Choose the VonG X
The VonG X is a masterpiece of DynaVap engineering — powerful, portable, and endlessly adaptable. It’s the ultimate choice for enthusiasts who value manual precision, flavour purity, and water-piece versatility in a single compact device.
Great White North Vaporizer Company presents the DynaVap VonG X — built for those who demand power, precision, and style from a truly mechanical vapourizer. Compact, durable, and ready to perform anywhere.
Read the full review: Dynavap Vong X Review The Ultimate Upgrade For Big Hits Micro Doses
Storz & Bickel VEAZY – Pocket-Friendly Dry Herb Vaporizer
Compact size, premium German engineering, and vibrant design — the VEAZY brings Storz & Bickel’s signature performance into a pocket-friendly format.
Sorry, your browser doesn’t support embedded videos.
Watch the VEAZY in action — updated visuals and real-world use.
Overview
The VEAZY Vaporizer from Storz & Bickel is designed for portability without compromise. Weighing just 134 g and measuring 13.4 cm tall, it delivers premium hybrid convection/conduction heating, Bluetooth Web-App control, and comes in four eye-catching colours. Built for style, simplicity and serious vapour performance.
Key Features
Hybrid Heating (Convection + Conduction): Produces dense, rich vapour and efficient extraction.
Rapid Heat-Up: Around 40 seconds to reach 180 °C (356 °F).
Vibrant Colour Options: Alluring Black, Dynamic Blue, Inspiring Orange, Charming Pink.
Bluetooth Web-App Customisation: Adjust Base temperature, Booster and Superbooster levels, and access updates.
Ultra-Portable Design: Weight: 134 g (0.3 lb); Dimensions 3.7 × 13.4 × 3.5 cm.
Premium Materials & Certified Quality: Medical-grade PEEK, ceramic-coated filling chamber, UL 8139 certification.
What’s Included
1 × VEAZY Vaporizer (Dry Herb)
1 × USB-C Charging Cable
Cleaning Brush & Stir Tool
2 × Fine Screens, 2 × Coarse Screens
2 × Mouthpiece O-Rings
User Manual
Colours Available: Alluring Black, Dynamic Blue, Inspiring Orange, Charming Pink.
Performance & Design Insights
Despite its compact size, the VEAZY maintains the hallmark performance of Storz & Bickel portables: a smooth draw, consistent flavour, and efficient extraction. Reviewers noted it achieves around 90% of the performance of the larger VENTY model — in a more discreet, carry-friendly form.
One-button operation makes it exceptionally user-friendly, while the Bluetooth Web-App unlocks advanced customisation for enthusiasts. Whether you’re stepping into the world of premium vaporizers for the first time or downsizing for portability, the VEAZY is a standout.
Specifications
Temperature Range: 40 °C – 210 °C (104 °F – 410 °F)
Heating Technology: Hybrid convection + conduction
Heat-Up Time: ~40 seconds to 180 °C (356 °F)
Battery & Charging: Lithium-ion, USB-C
Dimensions: Width 3.7 cm (1.46″) × Height 13.4 cm (5.28″) × Depth 3.5 cm (1.38″)
Weight: 134 g (0.3 lb)
Warranty: 2-year limited manufacturer warranty (plus extension on registration)
Why Choose the VEAZY?
The VEAZY positions itself as the most accessible entry point into Storz & Bickel’s premium vaporizer ecosystem — offering near-top performance in a sleek, pocket-ready package and spirited colour choices. If you’ve considered a Crafty+ or Venty but wanted something more compact and colour-rich, the VEAZY delivers exceptional value without compromise.
Frequently Asked Questions (FAQ)
Can I use the VEAZY without the app?
Yes — you can operate it using its one-button system in preset mode. However, if you’d like to fine-tune every degree, custom Booster/Superbooster settings and access device updates, you’ll want the Web-App.
How do I know the battery status?
When charging: rapid flashing blue = <30%, normal flashing = 31–60%, slow flashing = 61–98%, steady blue = 100%.
How do I set the temperature?
Press once to activate Base (default 180 °C / 356 °F), double-click for Booster (+15 °C / 27 °F), and double-click again for Superbooster (+15 °C / 27 °F). Use the Web-App to customise each level.
How does the VEAZY compare to other Storz & Bickel portables?
The VEAZY offers about 90% of the VENTY’s extraction performance in a far lighter and more pocketable design, though it has slightly less airflow and shorter battery life. For casual or daily carry use, the VEAZY hits the sweet spot.
Read the full review: Storz Bickel Veazy Review Unboxing Smallest S B Ever First Look
DynaVap HyperDyn TygerDyn: Titanium Big Bowl Dry Herb Vaporizer
DynaVap HyperDyn – TygerDyn
Introducing the TygerDyn HyperDyn, a bold new release with a striped DuraDyn finish that is as durable as it is striking. Built from medical-grade titanium and engineered for serious sessions, this is the first Big Bowl vaporizer from DynaVap — designed to deliver heavy hits, extended sessions, and adjustable control in the palm of your hand.
Who is the HyperDyn for?
The HyperDyn is made for connoisseurs who want a “session style” thermal extraction — bigger rips, longer bowls, and precision control without batteries.
Key Benefits
Massive rips & extended sessions: 0.25 g chamber capacity pushes extractions further before reloads.
Durability you can feel: Fully machined titanium construction with scratch-resistant DuraDyn finish.
Flavour focused: Clean thermal extraction brings terpene-rich vapour without combustion.
Water piece ready: Built-in 10 mm and 14 mm tapers for easy bong integration.
Battery-free design: No electronics, no charging. Heat with a torch or induction heater anywhere.
Discreet & modular: Pocket-sized and compatible with previous DynaVap midsections, tips, and mouthpieces.
HyperDyn Features
Bigger tip chamber/bowl (~0.25 g) for session-length extractions
Clean, durable look with DynaVap’s DuraDyn striped TygerDyn finish
Hardened titanium build for lifetime performance
Dual taper (10 mm / 14 mm) for water piece fitment
Modular compatibility with legacy DynaVap parts (except Hyper Cap ↔ Hyper Tip is unique)
Ergonomic stem with easy airport access
Precision-machined Hyper Cap with consistent Captive Cap click technology
Seven adjustable airflow settings via condenser depth control
How to Use the HyperDyn
Remove the Hyper Cap and load ground herb into the titanium Tip chamber.
Re-attach the Cap, then heat evenly with a torch or induction heater until it clicks.
Inhale through the mouthpiece. A second click signals cooldown.
Reheat for more extraction, or save AVB (already vaped bud) for later uses.
Parts & Build
Hyper Cap – TygerDyn
Titanium Hyper Tip – TygerDyn
Titanium Stem – TygerDyn
Titanium Condenser Assembly with Mouthpiece
Titanium CCD (screen)
High-temp O-rings (4 total)
Also Includes
DynaVap Hyper Dosing Capsule (~0.125 g capacity, fits Hyper Tip; also sold in 5-packs)
DynaVap Tin Case
Accessory Compatibility
The Wand with Adaptor
DynaStash XL
SlimStash XL
SlingStash (with storage cup removed)
Specs
Bowl size
~0.25 g (Hyper Tip chamber)
Material
Medical-grade titanium
Finish
DuraDyn TygerDyn striped pattern
Heat source
Butane torch or induction heater
Tapers
10 mm & 14 mm
Airflow settings
7 adjustable positions via condenser depth
DynaVap M7 TwoToniuM
Meet TwoToniuM — the first two-tone Fall colour from DynaVap. With a sharp, dark-to-light contrast and all the performance of the latest M 7, this eye-catching, pocket-friendly device is built for flavour, efficiency, and total portability — no batteries required. Available in limited supply.
Why you’ll love the M7 TwoToniuM
Battery-free freedom: Heat with a butane torch or induction heater and enjoy anywhere, anytime.
Durable by design: Medical-grade stainless steel, made in the USA.
Flavour first: Thermal extraction unlocks terpene-rich vapour and clean taste.
Use less, get more: Stretch your herb — many users report using >50% less material with excellent results.
Discreet & modular: Palm-sized, pocket-ready, and compatible with DynaVap accessories.
Who is the M7 for?
Anyone who wants an exceptional dry herb experience — from microdosing to complete extractions — without electronics.
M7 feature highlights
Bigger rips & heat retention: A higher-mass tip and chamber for stronger, more controlled extractions.
Finless tip, cooler fingers: Up to 20% less heat transfer from tip to stem.
Even extractions: Refined mass distribution reduces scorching and hot spots.
More airflow: Redesigned captive cap fitment + increased convection vs previous M models.
Simple airflow control: New airport with “Pivot”-style rocker for on-the-fly tuning.
Microdose-ready: “Adjust-a-bowl” halves the chamber size in seconds.
Streamlined grip: Textured stem pattern for secure handling and a fresh look.
Captive Cap “click”: Audible temperature cue for consistent, user-controlled sessions.
How to use the M7 TwoToniuM
Remove the Cap and load ground dry herb into the Tip chamber.
Re-cap, then heat the Cap (not the stem) with a torch or induction heater until it clicks (about 5–7 seconds).
Inhale from the mouthpiece. When the Cap clicks again, it has cooled.
Re-heat for further extraction, or save your AVB for later uses.
Tip: Cover or feather the airport to fine-tune vapour density and temperature draw-by-draw.
Parts & build
DynaVap Captive Cap
Stainless Steel Tip: M 7 — TwoToniuM
Stainless Steel Stem: M 7 — TwoToniuM
Stainless Steel CCD (screen)
High-temp O-rings (2)
Stainless Steel Condenser + O-rings (2)
What’s in the box
DynaVap Tin Case
DynaTorch (single flame / empty)
Pink Slip
Specs
Bowl size
~0.1 g (adjust-a-bowl compatible)
Material
Medical-grade stainless steel
Heat source
Butane torch or induction heater (sold separately)
Design
Two-tone “TwoToniuM” finish; finless M7 tip; textured stem
FAQ
Is the M7 TwoToniuM good for microdosing?
Yes. Use the adjust-a-bowl to reduce the chamber by half for efficient micro-loads.
What’s the best heat source?
It works with virtually any flame, but a quality butane torch or an induction heater delivers the best flavour and consistency.
How do I control vapour?
Feather the airport and experiment with heat placement/rotation on the Cap. The Captive Cap’s click gives a repeatable temperature cue.
The DynaVap B2 refines the original B design with a larger 0.075 g bowl, a durable O-ring-free silicone stem, and the brand-new DynaTorch lighter — all in one compact, Canadian-ready kit.
Sorry, your browser doesn’t support embedded videos.
See the DynaVap B2 Complete Kit in action — bigger bowl, better flavour, built to last.
Overview
The DynaVap B2 is a true evolution of the entry-level B — simpler, tougher, and more enjoyable. With a 0.075 g bowl, stainless-steel airpath, and unbreakable silicone stem, it delivers consistent, flavour-rich sessions anywhere. The kit also includes the DynaTorch lighter and a protective tin case for convenient portability.
Ships from Canada 🇨🇦 with fast, tracked delivery and Canadian support from VapeNorth.ca.
Key Features
0.075 g bowl (~50% larger than the original B) for satisfying draws.
Silicone stem: O-ring-free, anti-roll, pocket-safe and durable.
Stainless-steel airpath for clean taste and longevity.
10 mm water-piece fit for cooler, smoother vapour.
DynaTorch included — cap-inspired butane lighter made for the B2.
Protective tin case stores both B2 and DynaTorch together.
Induction-heater compatible for hands-free use.
Tip-swappable with other DynaVap tips (O-rings may remain installed).
What’s Included
1 × DynaVap B2 device (silicone stem + stainless-steel tip & condenser)
1 × DynaTorch butane lighter
1 × Protective tin case (cap-inspired design)
Performance & Design
Compact, durable, and easy to use — the DynaVap B2 delivers precision manual vaporization without electronics. The silicone stem keeps cool to the touch, while the stainless-steel airpath preserves purity of flavour. Compatible with standard butane torches or induction heaters for consistent heating and repeatable sessions.
B vs B2 — At a Glance
Bowl Size: 0.075 g (~50% larger than the original B)
Tip Design: Redesigned geometry for more even heating
Stem: Anti-roll silicone stem with O-ring-free connection
Lighter: DynaTorch included (instead of sold separately)
Case: Protective tin included in kit
Specifications
Bowl Capacity: 0.075 g (fixed)
Stem Material: Silicone (O-ring-free design)
Airpath: Stainless Steel
Water-Piece Fit: 10 mm connection
Heating Method: Butane torch (included) or induction heater
Case: Cap-shaped protective tin
Who It’s For
The DynaVap B2 is perfect for anyone looking for a simple, affordable entry into thermal extraction. It’s compact, unbreakable, and Canadian-ready — a great starter for new users and a fun addition for veterans who want a daily carry device.
Frequently Asked Questions
What’s new on the B2 compared to the original B?
The B2 adds a larger bowl, redesigned tip, anti-roll silicone stem, and includes the DynaTorch and tin case right in the box.
Can I use the B2 with an induction heater?
Yes — its stainless-steel tip and cap make it fully compatible with most DynaVap-style induction heaters.
Is the CCD adjustable on the B2?
No, the B2 uses a fixed 0.075 g bowl for consistent and repeatable loads.
Can I swap other tips onto the B2 stem?
Yes — most DynaVap tips fit perfectly, even with O-rings installed.
Does the B2 fit water pieces?
Yes — it connects seamlessly with 10 mm joints for cooler draws.
Read the full review: Dynavap B2 Review 2025 Bigger Bowl Silicone Stem Dynatorch Included
Vapvana All-Star Cordless Kit – Wireless Ball Vape Power and Freedom
The All-Star Cordless Kit by Vapvana takes the same affordable power and performance of the All-Star lineup and removes the tether. With a cordless heater head and an organized wooden dugout dock, this system delivers massive, flavour-rich vapour without being tied to a wall. Designed for both flower and concentrates, the All-Star Cordless is a complete dual-use solution built for enthusiasts who want freedom, performance, and convenience in one package.
Wireless Performance, Desktop Reliability
Vapvana is known for its powerful ball vapes, and the All-Star Cordless continues that tradition with a stainless steel heater packed with 300 ruby balls (2.5mm). While the premium Ace system is made from titanium and uses gem-cut rubies with a larger bowl capacity, the All-Star Cordless provides a more accessible entry point to the same high-level performance. You still get dense vapour, strong flavour, and dependable heat - now with true wireless convenience.
Dual-Use Design: Flower or Concentrates
What sets the All-Star Cordless apart from the wired version is its dual-use capability. Out of the box, it’s ready for flower with the All-Star Modular Bowl, which can be used in half-size mode (0.1g microdose) or full-size mode (0.2g heavy hits). But the kit also includes a 25mm quartz auto-spinner banger with pearls and marble top, making it a fully capable concentrate system as well. With the included glass reducer, you can fit the banger onto 10mm or 14mm rigs.
The Dugout Dock: Organized and Ready
The wooden dugout dock is the control centre of the All-Star Cordless Kit. It holds the digital PID controller, heating coil, heat shield, heater stand, and all included accessories in one compact station. Built-in slots for 10mm, 14mm, and 18mm joints mean you can keep everything neatly in place. This isn’t just a heater - it’s a complete desktop setup designed for convenience and everyday use.
Freedom vs. Endurance
Going cordless means you gain tether-free freedom to move and use your setup without being locked to a wall plug. The trade-off is that, unlike the wired version, you won’t get endless back-to-back sessions without breaks. For many users, the ability to untether more than makes up for it, especially with the added dual-use flexibility and all-in-one dock design.
What’s in the Box
All-Star Cordless Heater (stainless steel, pre-assembled with rubies)
All-Star Modular Bowl with removable wooden handle
Heating Coil Assembly (25mm “Hot Hole”)
Wooden Dugout Dock with built-in accessory slots
Quartz Banger (25mm Auto Spinner) with pearls and marble top
Glass Reducer (14mm to 10mm)
Digital Temperature Controller (PID)
Power cable (North American)
Heater Stand Post for the dock
Scoop & Tamper Tool (SQP)
Wooden Cleaning Brush
Spare screens, o-rings, and screws
Why Choose the All-Star Cordless Kit?
If you want premium ball vape performance in a complete, organized package at an affordable price, the All-Star Cordless Kit is your answer. With wireless freedom, dual-use compatibility, and Vapvana’s reputation for reliable performance, this system is built to impress. Whether you’re chasing massive clouds, rich flavour, or the convenience of a docked all-in-one setup, the All-Star Cordless delivers inning after inning.
VapVana The Natural Kit — All-Glass Ball Vape System
The Natural Kit from VapVana represents the pinnacle of purity and performance in desktop vaporization. Featuring an all-glass, metal-free design crafted entirely from quartz and sapphire, it delivers a flawless, flavour-rich experience that defines what a true connoisseur-grade system can be.
Sorry, your browser doesn’t support embedded videos.
Overview
The VapVana The Natural Kit sets a new benchmark for clean, all-glass thermal extraction. With a 100% quartz and sapphire heating engine, this revolutionary system eliminates metal entirely from the airpath for unmatched purity and true-to-flower flavour. Built as a complete connoisseur-grade setup, The Natural is ready for dry herb or concentrates straight out of the box.
Key Features
All-Glass Heating System: Constructed entirely from quartz and sapphire for a completely metal-free vapour path.
Complete Desktop Kit: Includes every essential component for both dry herb and concentrate sessions.
Precision PID Controller: Adjust your temperature with exact control for consistent results.
Dual-Use Capability: Includes a full quartz banger setup for concentrate compatibility.
Custom Wooden Dugout Dock: Organizes your heater, controller, and tools in one elegant base.
20 mm Coil + Stand: Provides rapid, stable heat with secure storage between sessions.
What’s Included
1 × The Natural Heater – Quartz Injector with ~205 Sapphire Pearls and Quartz Handle
1 × All-Glass Backstop Bowl – 10 mm Adapter and Dry Catch
1 × PID Temperature Controller
1 × Power Cable (110V North America)
1 × Solid Wooden Dugout Dock
1 × 20 mm Hot Hole Coil
1 × Heater Stand Post with Glass Insert
1 × Quartz Banger Set – Auto Spinner with 8 mm Pearl and Marble Cap
1 × Scoop and Brush Tool Set
Performance & Design
Every component of The Natural Kit is designed for purity, precision, and effortless performance. The 205 sapphire pearls inside the quartz injector retain and distribute heat evenly across your material, producing smooth, flavour-forward vapour with no metallic interference. The glass-on-glass bowl and injector pairing ensures a frictionless seal and minimal draw resistance.
The included PID controller provides consistent, precise temperature management. The 20 mm coil reaches full temperature rapidly and maintains stability across extended sessions, while the wooden dock keeps everything organized and safe between uses.
Why Choose The Natural Kit?
For enthusiasts who demand the cleanest possible flavour and performance, The Natural Kit offers a truly uncompromised experience. With zero metal in the vapour path, every session delivers the essence of your material — nothing more, nothing less. This kit is ideal for connoisseurs, collectors, and anyone who values design simplicity paired with advanced thermal engineering.
Read our full review of the VapVana Natural here.
Specifications
Materials: 100% Quartz + Sapphire (no metal)
Heating Type: Convection
Compatibility: Dry Herb & Concentrates
Coil Size: 20 mm
Controller: Digital PID with Adjustable Temperature
Power: 110V (North America)
Bonus: Basic Glass Injector Bowl (early orders)
Final Thoughts
The VapVana The Natural Kit stands alone as the world’s first all-glass, sapphire-enhanced ball vape system. Combining cutting-edge design with flawless execution, it offers unparalleled purity and performance for users who won’t settle for less. From dry herb to concentrates, it’s the definition of clean power and refined engineering.
If you are comparing leading options across the category, you can also read our Best Ball Vapes in Canada for 2026 buyer’s guide.
DynaVap G3 – Battery-Free Glass Vaporizer for Dry Herb
The Purest Way to Vape, Now Under $50
Experience Thermal Freedom
No batteries. No buttons. No nonsense. The DynaVap G3 brings back the joy of pure, direct vaporization—with just a flame and a flick of the wrist. Built around the power of thermal extraction, this all-glass portable vaporizer delivers rich flavour and smooth hits in seconds. Whether you're a microdoser, minimalist, or just tired of charging, the G3 keeps it simple without cutting corners.
Why Choose the G3?
Battery-Free by Design – Heat it with a torch - no cables, no chargers, no waiting.
Glass-on-Glass Purity – A unibody stem and tip combo built from quality glass for clean flavour and easy maintenance.
Captive Cap Technology – Audible “click” lets you know exactly when it’s ready—no guesswork, no overheating.
Tri-Lobe Stem – Anti-roll design keeps your G3 from slipping off the table and onto the floor.
Pocket-Sized Efficiency – The G3 tin case fits anywhere. Just toss it in your pocket, heat it up, and go.
Simplify Your Session
Load the chamber with just a pinch - around 0.05g is all it takes. Then cap it, heat it, and inhale. The G3’s click-to-vape system means you don’t need to guess when it’s ready. It’s fast, efficient, and designed to stretch your herb further than you thought possible. Want a stronger hit? Just let it soak up a few more seconds of heat, then ride the clouds.
What’s in the Box?
1 × G3 Glass UniBody (tip + stem)
1 × Stainless Steel Captive Cap
1 × Slim Metal Storage Tin
Recommended Tips
Heat the cap evenly near the tip until you hear the first “click.”
Inhale slowly for best vapour density and flavour.
Listen for the second “click” to know when it’s cooling down.
For stronger hits, heat for an extra second or two after the first click.
Lightweight. Portable. Powerful.
The DynaVap G3 isn’t just a budget-friendly entry into the world of dry herb vaporization - it’s a fully capable, highly efficient tool in a glass package. Whether you’re new to vaping or just want something simple and effective, this is one of the best value buys under $50.
Perfect For:
Anyone new to vaporizing looking for an easy entry point
Fans of clean flavour and full manual control
Microdosers and budget-conscious users
People who hate charging and just want to heat and go
Ready to Cut the Cord?
Step away from batteries and into total control. The DynaVap G3 is your new go-to for flavourful, on-demand thermal extraction—whenever and wherever you want it. No batteries. No limits. Just glass, flame, and performance.
Read our full review of the DynaVap G3 here.
Ceramo XL – The Pinnacle of Battery-Free Convection
Welcome to a new standard in dry herb vaporization. The Ceramo XL is a precision-engineered convection device built for purists who value clean flavour, efficient extraction, and rock-solid durability. It’s designed to outperform traditional vaporizers — all without batteries or electronics.
One-Piece Zirconia Construction
The Ceramo XL is machined from a solid block of black zirconia — a tough, heat-resistant ceramic known for its stability and neutral flavour. Its friction-fit screen and no-o-ring design reduces maintenance and keeps performance consistent session after session.
Designed for Performance, Built to Last
Ceramic Airpath – Smooth airflow with minimal heat soak or flavour distortion
Ultra-High-Flow (UHF) Stem – Built for strong, easy draws and fast clearing
Heater Plate Matrix – Optimized for deep, even convection extraction
0.2g Chamber Capacity – Wide and shallow for easy loading and quick clearing
14mm Male Taper – Compatible with your favourite glass pieces
Replaceable Metal Screen – Friction-fit for easy cleaning or swapping
How to Use the Ceramo XL
Loosely fill the chamber with a medium grind of dry herb.
Place the XL Camo Cap onto the heater end of the device.
Apply heat to the tip using a torch or the Inductor. Heat for 4–7 seconds (Inductor) or 7–15 seconds (torch).
Inhale gently from the stem. Rotate and reheat for 2–3 cycles to fully extract your material.
What’s Included
1 x Ceramo XL (Black Zirconia)
1 x XL Camo Cap
1 x Replaceable Metal Chamber Screen
1 x Bambox Storage Case
1 x Burner Torch Lighter
1 x Cap Adjustment Tool
Inspired by the Convector XL
The Ceramo XL expands on the proven design of the Convector XL, delivering even greater airflow, upgraded materials, and a simplified, o-ring-free structure. It retains the trusted heater matrix and 14mm taper while pushing flavour and form to the next level.
Why Choose Ceramo XL?
Ceramic Airpath – Smooth flavour and high heat resistance
Low Maintenance – No o-rings or fragile seals
Fast Extraction – Full sessions in 2–3 heat cycles
Glass Ready – 14mm taper fits water pieces right out of the box
If you’re ready for high-performance convection without batteries or complexity, the Ceramo XL is your next move.
Flaka Zylo Portable E-Rig: A Compact, Affordable Concentrate Vaporizer
Looking for an easy-to-use, budget-friendly way to enjoy concentrates? The Flaka Zylo Portable E-Rig is the perfect entry-level concentrate vaporizer for beginners while also being an excellent secondary device for experienced users who want something compact and efficient.
What Makes the Flaka Zylo a Great Choice?
1. Affordable & Beginner-Friendly
If you’re new to concentrates, the Zylo provides a hassle-free way to get started. It’s designed to be simple to use while still delivering a solid, reliable experience without the high cost of premium e-rigs.
2. Ultra-Portable & Compact
At a fraction of the size of larger e-rigs, the Zylo is small enough to take anywhere, making it an ideal on-the-go concentrate vaporizer. It’s lightweight, pocket-friendly, and easy to transport.
3. Great Performance for the Price
Despite its affordability, the Zylo still delivers smooth, flavourful vapour. It’s perfect for those who want a reliable daily driver without breaking the bank.
4. Easy-to-Use Operation
Simple button controls for a no-fuss experience
Preset temperature settings for quick adjustments
Fast heat-up time so you can start your session quickly
Who is the Flaka Zylo For?
Newcomers to concentrates looking for an affordable, user-friendly option
Experienced users wanting a budget-friendly backup or travel rig
Anyone who values portability in a compact concentrate vaporizer
Package Contents
1 x Flaka Zylo Portable Concentrate E-Rig
1 x Charging Cable
1 x User Manual
Final Thoughts
The Flaka Zylo Portable E-Rig is one of the best budget-friendly concentrate vaporizers available. Whether you're looking to explore concentrates for the first time or need a reliable, portable backup device, the Zylo delivers great performance without the high price tag.
Affordable and Versatile: The Mini Cartomizer for Concentrates
Looking for an easy and cost-effective way to enjoy concentrates like shatter, wax, and rosin? The Mini Cartomizer is a 510-threaded concentrate atomizer that works with any standard 510-threaded battery, making it a simple yet powerful addition to any setup.
What is the Mini Cartomizer?
The Mini Cartomizer is a compact, inexpensive solution for vaporizing concentrates. Instead of investing in a full dab rig or a dedicated concentrate vaporizer, this 510-threaded attachment lets you transform any compatible battery into a portable concentrate system.
Why Use a 510-Threaded Concentrate Atomizer?
Universal Compatibility – Works with most 510-threaded batteries for ultimate flexibility.
Affordable Concentrate Setup – No need to buy an expensive rig or dedicated concentrate vaporizer.
Easy to Use – Simply attach it to your battery, load your concentrate, and enjoy.
Compact and Portable – Take your concentrates on the go without extra bulk.
How to Use the Mini Cartomizer
Attach the Mini Cartomizer to your 510-threaded battery.
Load a small amount of concentrate into the atomizer.
Activate the battery and inhale for smooth, flavourful vapor.
Who is This For?
If you already own a 510-threaded battery and want a low-cost way to enjoy concentrates, the Mini Cartomizer is the perfect solution. It’s great for beginners looking to try concentrates or experienced users who want a portable, discreet option.
Final Thoughts
The Mini Cartomizer is one of the easiest and most affordable ways to add concentrates to your vaporizing experience. If you’re looking for a simple, efficient, and universal concentrate atomizer, this is a must-have accessory.
The Puffco Pivot delivers high-end concentrate performance in a compact, travel-ready design — engineered for smooth, powerful, and flavour-rich dabs anywhere you go.
Sorry, your browser doesn’t support embedded videos.
See the Puffco Pivot in action — premium performance and portability in one sleek device.
Overview
The Puffco Pivot redefines portable concentrate vaporizers with its advanced 3D Chamber Technology and real-time temperature control. It delivers the rich flavour, dense clouds, and ease of use Puffco is known for — all in a device that fits in your pocket.
With fast heat-up, haptic feedback, and multiple temperature presets, the Pivot makes every session effortless and consistent. Perfect for anyone who wants powerful, portable performance with true Puffco precision.
Pocket-Size Powerhouse
Despite its discreet, pen-style form, the Pivot delivers cloud output comparable to full-sized rigs. It’s built for convenience without compromise — ready for big hits, smooth vapour, and perfect portability.
3D Chamber Technology
Puffco’s revolutionary 3D Chamber evenly heats sidewalls as well as the base for faster, smoother, and more complete vaporization. This design enhances flavour and efficiency — no stirring, no waste, just pure extraction.
Real-Time Temperature Control
The Pivot constantly monitors and adjusts temperature, ensuring consistent results hit after hit. Choose between gentle, terpene-rich sips or heavy, cloud-filled draws — it keeps your target temperature perfectly balanced throughout your session.
Presets, Boost Mode & Smart Feedback
Four Preset Temperatures: Choose from multiple heat levels to customize flavour or vapour density.
Boost Mode: Instantly ramps up heat for maximum clouds and intensity.
Smart Light Bar: Displays temperature, heating progress, and battery life at a glance.
Haptic Feedback: Gentle vibration lets you know exactly when the device is ready.
Built for Durability & Easy Maintenance
The Pivot features a protective dust cap that keeps your chamber clean between uses. Its USB-C charging provides quick power-ups and up to 15 sessions per charge. Simple to clean and rugged enough for everyday travel.
What’s Included
1 × Puffco Pivot Base, Chamber & Mouthpiece
1 × Set of Cotton Swabs
1 × Loading Tool
1 × USB-C Charging Cable
Frequently Asked Questions
What makes the 3D Chamber special?
It heats from the sides and bottom for faster, more even vaporization — improving flavour and efficiency.
How long does the battery last?
Up to 15 sessions per charge, depending on your temperature setting and usage style.
Is the Pivot easy to clean?
Yes — its chamber wipes clean easily with cotton swabs, and the dust cap prevents buildup when stored.
Does it have multiple temperature settings?
Yes — four optimized presets and a Boost Mode for maximum vapour production.
Who is it best for?
The Pivot is ideal for concentrate users who want desktop-quality performance in a portable design.
Final Thoughts
The Puffco Pivot combines top-tier technology, sleek design, and intuitive usability in a single device. It’s compact, powerful, and ready to deliver premium dabs anywhere you go.
Read our full review here.
Introducing the Vapman Click – The Future of Flame-Powered Vaping
The Vapman has always been a standout in the world of flame-powered vaporizers, known for its rapid heat-up time, exceptional flavour, and satisfying performance. Now, with the release of the Vapman Click, this iconic device has taken a revolutionary leap forward.
Click-Back Mechanism for Perfect Precision
Say goodbye to guesswork. The innovative Clickback mechanism transforms the Vapman experience by providing audible feedback for your heating cycle. Heat the device until it clicks, inhale, and then stop when it clicks back into its original position. This groundbreaking feature ensures every session is consistent, simple, and satisfying—no counting or wondering required.
Double the Capacity for Bigger Hits
The Vapman Click is designed with a significantly larger herb chamber of 0.2g, making it perfect for longer sessions. Whether you're seeking full-bodied clouds or smooth, flavour-packed draws, the increased capacity and enhanced performance cater to all preferences.
Fully Adjustable Airflow Control
Customise your experience with precision. The Vapman Click’s adjustable airflow allows you to fine-tune your sessions. From thick, dense vapour with a closed airflow to fresh, airy hits with it wide open, the choice is yours.
Masterful Craftsmanship and Premium Materials
Handcrafted from a variety of exceptional wood options, the Vapman Click combines natural beauty with exceptional durability. Its three-part construction—featuring a mouthpiece, middle piece for adjustable airflow, and a heart piece housing the gold-plated copper oven—ensures efficient heat transfer and an unforgettable flavour experience.
Effortless Performance for Everyone
Analogue devices can seem daunting, but the Vapman Click’s new features make it user-friendly and approachable. The Clickback mechanism eliminates the learning curve, giving both beginners and seasoned users a consistent and enjoyable session every time.
Portable Perfection
Weighing just 25g and standing only 2.5” tall, the Vapman Click is as portable as it is powerful. Its compact size and protective case make it the ideal companion for vaping on the go.
Experience the Evolution
The Vapman Click delivers smooth, flavourful vapour with every use. Built for seamless performance, enhanced convenience, and lasting durability, it’s the next generation of flame-powered vaporizers. Take your sessions to the next level with the Vapman Click—designed to maximize taste, ease, and enjoyment, wherever you go.
Meet the Vapman Click—the portable vaporizer designed for precision and ease, delivering consistent, flavourful vapour with no guesswork. Read our blog for an in-depth review and user guide to see why it’s a must-have for effortless vaporization.
The new Puffco Peak is the evolution of the world’s most popular e-rig — redesigned from the ground up to make dabbing simpler, smoother, and more consistent. With 3D heating technology, an improved Joystick Cap, and real-time temperature control, it delivers effortless sessions and flawless flavour every time.
Sorry, your browser doesn’t support embedded videos.
New Puffco Peak — next-generation performance in a compact, refined form.
Quick take: If you want an easy, reliable e-rig with strong flavour and minimal setup friction, the New Puffco Peak is one of the best options in this price tier.
Simple workflow: quick setup and low-maintenance daily use.
Consistent results: 3D heating + real-time temp control keeps sessions steady.
Best fit for: users who want performance without a steep learning curve.
Buy with confidence: ships from Canada, support if you need help, and Sezzle financing at no extra cost to you.
For a noticeable upgrade over stock glass, pair it with the Peaker Recycler for New Puffco Peak.
Effortless Performance, Elevated Experience
The new Puffco Peak combines cutting-edge heating technology with intuitive design to deliver premium concentrate sessions without the learning curve. It features the latest 3D Chamber for even heating, a redesigned Joystick Cap for optimal airflow, and real-time heat monitoring that keeps every dab perfectly controlled from start to finish.
3D Chamber & Joystick Cap: Power Meets Precision
3D Chamber: Heats from the sides and bottom simultaneously for more even vaporization, richer flavour, and smoother hits.
Joystick Cap: Maximizes airflow and concentrate movement for denser vapour and superior extraction efficiency.
Smart Temperature Control
Advanced internal sensors actively adjust power to maintain precise heat throughout your session. Whether you’re after low-temp terpene flavour or high-temp potency, the Peak automatically keeps temperatures stable for perfect results every time.
Fast Charging & Long Battery Life
Up to 35 dabs per charge — impressive battery endurance for an e-rig this size.
USB-C to USB-C charging for fast, reliable recharges.
LED battery indicator provides instant power feedback at a glance.
Compatible with Peak & Peak Pro Glass
Customizing your setup is easy. The new Puffco Peak works with all Peak and Peak Pro glass attachments, giving you access to countless glass and cooling options.
What’s Included
Puffco Peak Base
Peak Glass 2.0
Peak 3D Chamber
Joystick Cap
USB-C Charging Cable
Loading Tool
Cotton Swabs
Quick Start Guide
Frequently Asked Questions
What’s new compared to the original Puffco Peak?
The new Peak adds the 3D Chamber for superior efficiency and flavour, a Joystick Cap for better airflow, faster USB-C charging, and a lower price — all while keeping Puffco’s signature ease of use.
How long does the battery last?
Expect up to 35 sessions per charge depending on your heat level and session length. The LED battery indicator shows remaining power clearly.
Can I use my old Peak or Peak Pro glass?
Yes — all previous Puffco Peak and Peak Pro glass tops fit perfectly.
Is it easier to use than before?
Absolutely. Real-time temperature control and redesigned ergonomics make this the most effortless Peak yet — ideal for both new and experienced dabbers.
What’s the warranty?
Every unit includes a 2-year manufacturer warranty from Puffco covering materials and workmanship.
Final Thoughts
The new Puffco Peak streamlines the dabbing experience with faster heat-up, smarter control, and smoother airflow. Whether you’re upgrading from an older Peak or starting fresh, this version offers the perfect blend of convenience, design, and cutting-edge performance.
Read our full review of the New Puffco Peak here.
Minimalist Design, Maximum Performance
Discover the perfect fusion of minimalist design and exceptional performance with the Camouflet Injector. Lightweight and versatile, this injector heater is designed for use with 20mm coils powered by PID temperature controllers, or with the Camouflet Inductor induction heater (you can even use it with a big ol' torch as well).
Signature Technology, Unique Power
Utilizing the same cutting-edge technology developed for the Convector but applied in a larger format, the Camouflet Injector delivers a unique and powerful signature that's sure to tantalize your senses and delight your taste buds. The Injector is plenty powerful after a proper heating, don't let the small size fool you.
Camouflet Injector Features:
- Stainless Steel Housing: Built to last, the Camouflet Injector features a durable stainless steel housing for longevity and durability.
- Patent-Pending Heater Matrix: Experience enhanced performance with the patent-pending heater matrix, ensuring rapid and consistent heating for optimal vaping sessions.
- 18mm Male Attachment: Compatible with 20mm e-nail coils with 4 or 5 coil wraps, the Camouflet Injector offers versatility and convenience.
- Compatible with the Inductor: Pair the Camouflet Injector with the Inductor for seamless integration, enhanced performance, and a little magic in your next session.
- 3mm Threading for Handle Connection: Connect with ease using the included handle or use a custom handle, offering flexibility and customization in usage.
- Tethered or Untethered Use: Enjoy the freedom to use the Camouflet Injector tethered or untethered, providing versatility to suit your preferences. A wireless/untethered Injector is the height of convenience and must be experienced for yourself to fully appreciate just how sweet it is.
What's Included:
- 1x Injector
- 1x Handle
- 1x Retention Ring
Sleek and Minimalist Design
The Convector comes in either stainless steel or titanium, and boasts a compact and minimalist design, offering a convection-focused heater that's user-friendly for novices and seasoned enthusiasts alike. Despite its size, this device packs a punch beyond its weight class, ensuring a satisfying vaping experience every time.
Customizable Air Path
Tailor your vaping experience with ease by choosing between the single-bore, high-flow ceramic air path tube or our quad-bore cooling tube. The single-bore tube provides lower draw resistance and exceptional flavour, while the quad-bore option increases cooling and slows draw speed. All of our Convector models are the quad-bore option, though a single-bore air path can be purchased separately.
Ultra-Fast Heating and Cooling
Equipped with a brand new, low thermal mass patent-pending heater design, the Convector delivers ultra-fast heat-up and cool-down times, allowing you to enjoy your vaping sessions where you want, when you want. You'll only heat the device for literally seconds, it heats up even faster than you expect it will.
Advanced Features
- Camo Cap: Featuring a precision heater plate assembly, the Camo Cap ensures optimal performance. Laser-welded heater plates with precise placement enhance heating consistency and prevent dislodging.
- Stem: Enjoy an 8mm precision bore throughout the stem, allowing for easy assembly with your preferred chamber or mouthpiece (DynaVap stems also use an 8mm connection). An improved taper ensures a better fit into 10mm glass joints, allowing you to use it with a 10mm female water piece without needing an adapter.
- Chamber: The ceramic tube can be inserted into the chamber's back/male connection side, simplifying assembly with a single O-ring. An extended chamber connection ensures a secure fit to the stem.
How to Use
Using the Convector is straightforward and doesn't have a huge learning curve. Simply place your ground material into the chamber, ensuring not to overpack it for proper airflow. Attach the Camo Cap, heat the tip for your desired length of time with either a torch or an induction heater, and inhale from the stem opening. For even better performance, pair the Convector with the Inductor heat source.
What's Included
- 1x Titanium Convector Device
- 1x Titanium Camo Cap
- 1x Titanium Chamber with O-rings
- 1x Stainless Steel Chamber Screen (Friction fit and replaceable)
- 1x Titanium or Stainless Stem
- 1x Bamboo Carrying Tube
Titanium Construction
Crafted from premium titanium, the Convector XL boasts durability and longevity for long-lasting performance and simple maintenance.
Enhanced Extraction Capability
Experience greater extraction capabilities with the Convector XL's large heater plate matrix, accommodating up to 0.2g of material for optimized sessions. The convection action delivers fantastic flavour and extra strong effects.
Cooling Fins and Friction-Fit Screen
Designed for optimal airflow and easy maintenance, the Convector XL features cooling fins on the chamber and a friction-fit replaceable screen. Do not underestimate the airflow on the Convector series, the extremely free airflow is one of the best features.
Quad Bore Ceramic Cooling Insert
Enjoy improved cooling with the optional quad bore ceramic cooling insert. The ceramic insert helps to improve the quality if your vapour before you inhale, leading to cool and comfortable hits.
14mm Male Tapered Stem
Achieve versatility and compatibility with glass accessories using the 14mm male tapered stem, ensuring seamless integration with your favourite 14mm female water pipe - no adapter required.
Modular Design for Versatility
Unlock endless possibilities with the Convector XL's modular design, featuring a DynaVap stem sized 8mm connection for seamless customization tailored to your preferences.
The Next Evolution in Vaping
The Convector XL's large diameter and shallow chamber design offers "one hit" extraction capability. When you combine this with the large chamber size of the XL, you get a monster heavy hitter with convection strength.
Unmatched Rapid Extraction
With a 70% larger heater matrix than the standard sized Convector, the Convector XL ensures rapid extraction and uniform convection penetration, raising the bar for efficiency in vaping.
How to Use
Simply load your favourite ground material into the chamber, ensuring not to pack too tightly for optimal airflow, attach the Convector cap, heat the tip for only a few seconds, and inhale from the stem opening. For truly next level performance, pair with the Inductor heat source for flame free heating.
What's Included
1x XL Convector Device
1x XL Camo Cap
1x XL Titanium Chamber with O-Rings
1x XL Stainless Steel Chamber Screen - Friction fit and replaceable
1x XL Titanium Stem
1x XL Ceramic Quad bore cooling tube with O-Rings
1x Bambox
1x Burner Torch Lighter
Find out more about the Convector XL in our full review here.
The Gammatron is a Flexible and Powerful Vape Pen
If you’re in search of a highly convenient and adaptable wax vaporizer that is engineered for durability, the Tronian Gammatron boasts superior scratch resistance compared to its counterparts. The Gammatron is equipped with coveted features tailored to meet the needs of any concentrate user. With its integrated storage container and built-in tool, aficionados can bid farewell to the inconvenience of carrying extra accessories while on the move. Offering a user-friendly interface, this Tronian wax pen effortlessly delivers voluminous clouds of either thick or flavourful vapour.
Tronian's engineers crafted the Gammatron to serve as the ultimate solution for wax enthusiasts, endowing it with a comprehensive feature set. The inclusion of a wax storage container underscores the device's user-centric design. Lined with silicone for an airtight seal, the container ensures the retention of terpenes. The Zirconia-built tool, affixed to the mouthpiece, exhibits exceptional heat resistance, and facilitates effortless cleaning through alcohol immersion.
Heats up Quickly with Precise Voltage Control
The Tronian Gammatron boasts instantaneous heat-up capabilities and precise voltage calibration. Notably, terpenes are released at lower temperatures compared to other active concentrate ingredients. A sluggish heat-up time may result in users experiencing terpene flavours predominantly during the initial draw, with subsequent draws delivering the primary active ingredients once the flavour dissipates. The Gammatron's swift heat-up mechanism ensures even and rapid heat dispersion, enabling users to savour flavourful vapour and active ingredients from the onset. Featuring three temperature settings, the device's lowest setting at 2.7V is ideal for flavour, while the highest setting at 3.3V is tailored for producing voluminous clouds.
The Kanthal Glass Coil Performs Beyond Expectations
The Spring-Wound Kanthal Glass Coil epitomizes durability and efficiency. This coil variant not only reduces long-term costs but also exhibits enhanced durability compared to non-spring-bound coils. Subjected to a unique rolling process to form a spring before being positioned around the glass rod, these coils are pivotal for accommodating longer coils within the heating chamber. The Kanthal Glass Coil's notable advantages include minimal blind spots and near-instantaneous heat-up times.
The Gammatron introduces a subtle convection element by drawing air from the chamber's sides, thereby enhancing flavourful vapour production despite its coil-based design.
Engineered to Endure
While we've highlighted features that render this device suitable for daily dabbing, the engineers at Tronian incorporated additional design elements for longevity. Encased in stainless steel and coated with powder vapour deposition (PVD) technology, the Gammatron boasts unparalleled scratch resistance. Furthermore, the Zirconia mouthpiece tool, renowned for its heat resistance, can be effortlessly sanitized using alcohol.
The Utillian 2 Wax Pen Offers Simplicity and Performance
Vape pens are back in a big way and if you crave the ultimate in convenience coupled with effortless functionality for your wax vaping needs, the Utillian 2 is for you. This wax pen has emerged as the pinnacle of simplicity, offering seamless operation and unparalleled performance to effortlessly fulfill your vaping desires. With its user-friendly design and innovative features, the Utillian 2 sets a new standard in wax pen technology, providing a hassle-free vaping experience like never before.
Load Easily with Magnetic Attachments
Bid farewell to the frustrations of dealing with sticky, gummed-up threading – the Utillian 2 wax pen boasts magnetic attachments for the battery, atomizer, and mouthpiece, revolutionizing the loading process with unparalleled ease and efficiency. With magnetic connections, reloading your wax pen has never been quicker or more hassle-free, allowing you to enjoy your concentrates without the hassle of tedious maintenance. Empowering users with unparalleled versatility, the Utillian 2 offers four distinct voltage settings – 3.0V, 3.4V, 3.8V, and 4.2V – allowing you to tailor your vaping experience to suit your preferences with precision and control. Whether you prefer subtle flavour profiles or dense, billowing clouds of vapour, the Utillian 2 delivers unparalleled flexibility, ensuring a customized vaping experience tailored to your unique tastes.
The Glass Mouthpiece Maintains Enhanced Flavour
Elevate your vaping experience with the Utillian 2's premium glass mouthpiece, meticulously designed to preserve the rich, nuanced flavours of your extracts with every draw. Crafted from high-quality glass, the mouthpiece ensures optimal flavour retention and purity, allowing you to savour the full spectrum of flavours inherent in your concentrates without any compromise.
Optimal Vaporization Supplied by Dual Quartz Atomizer
Experience the perfect balance of flavour and efficiency with the Utillian 2's dual quartz atomizer, meticulously engineered to maximize flavour retention while efficiently vaporizing your wax concentrates. The dual quartz design ensures even heat distribution and thorough vaporization, allowing you to enjoy smooth, tasty vapour with every puff, without any harshness or burnt taste.
In essence, the Utillian 2 wax pen redefines the standards of simplicity and performance in the world of vaping, offering unparalleled convenience, versatility, and flavour preservation for discerning enthusiasts. Whether you're a seasoned vaping aficionado or a newcomer to the world of concentrates, the Utillian 2 is guaranteed to exceed your expectations and elevate your vaping experience to new heights of satisfaction. Discover the epitome of wax pen excellence with the Utillian 2 – your gateway to a world of effortless, flavourful vaping enjoyment.
It’s M7… DynaVap M7
For many, 7 is a lucky number. For DynaVap, the newest generation of their perennial portable is known as the M7, and they went back to the drawing board to bring new and old fans alike the most sophisticated, high-performance torch powered portable vaporizer on the market. The M7 is a battery free vaporizer that is incredibly efficient with the amount of flower needed to straight up blow your doors off; we were shocked at how little dry herb we needed to use to light us right up.
Elegant in its Simplicity
Through years of experimentation and listening to their supporters, DynaVap has found a way to balance complexity with simplicity and that’s never been truer than it is with the M7. The new device has a simpler, more understated look than the previous device, the M Plus, but it’s still got the interesting visual vibe that we expect from DynaVap. Though hard to describe and truly meant for the eyes, the pattern wrapped around the M7 is akin to an overlapping and interwoven metal design but will only be truly visible under a macro lens.
If you take a look at the device from a wider view, the look is akin to carbon fibre, but the surface is actually rugged metal, a finishing process that was developed in-house by DynaVap.
The Best DynaVap Tip Yet
Another new development for this device is the innovative M7 tip that boasts the sharp Septa Serrated Crown that allows you to grind flower directly from a bud into the bowl. This completely redesigned tip has a completely functional half bowl adjustment that works infinitely better than in their previous models. The thermal mass has been moved under the oven leading to 20% less heat being transferred into the stem. The increase in mass translates into larger hits and though it’s hard to comprehend, DynaVap tips just keep getting better satisfying even the heaviest of hitters.
You’ll Want to Put it in Your Mouth
DynaVap didn’t leave the rest of the device out of the redesign process. The new mouthpiece feels natural in your mouth, and it fits natively into a 10mm water piece. The new airport has a zigzag design that provides a more interesting air displacement while matching the overall aesthetic of the M7’s design.
The M7 fits together simply and snugly. The tip and condenser each only use two o-rings, meaning you need only four for the entire device, and with o-rings, less is always better. The precision of which the tip connects to the body is just so clean, you can barely believe it.
Instead of going for an over the top, complicated design, the DynaVap M7 is a sleek, sophisticated device that won’t look out of place on your desk at work. This is a luxury product that both looks and feels like it and the performance is otherworldly. The M7 outperforms DynaVap’s previous M line iterations and actually comes in less expensive than their last one. It is unreal to see a price drop on a design this much better than the last, but we're into it.
