Water Tool Adapters

Vapers benefit from having water tools connected to their rigs by having the vapour cooled by water before inhalation. While not all water pieces will natively connect to every vaporizer, we’ve tirelessly solved this problem.

From 10mm to 14mm to 18mm, we offer adapters of all shapes, sizes and even a variety of wood grains. From a multi adapter that can take advantage of several fixed size openings to the wildly flexible DabCap V3, we have the adapter that your water tool needs.
With our Arizer 3-in-1 Glass Adapter, you can use your Solo 2 or Air 2 on any water piece with a female joint. It is the perfect option for any Arizer owner to enhance their experience with a water tool and keep an all-glass...
This adapter fits directly into your Arizer Air 2/Solo 2, replacing the traditional stem. It is very easy to install on your device, and it's just as easy to remove (it has a tight fit, heat your device before you...
This 3-In-1 Adapter will allow you to use your Arizer Go (ArGo) with either a 10mm, 14mm, or 18mm female water piece! The Arizer Go is an amazing portable, but it's also a great vaporizer to run through water. You...
The Arizer High Airflow 3-in-1 adapter features one single large diameter hole in the vapor path protecting your herb with a stainless-steel screen. Sized to work perfectly with either the Solo 2 or Air 2, this adapter fits on any...
Custom-made for the Mighty & Crafty, this Silicone Adapter twists onto the top of the vape, like the cooling unit, but this adapter enables you to use your Mighty/Crafty on any water piece with a 14mm or 18mm female joint....
This adapter fits directly onto your Crafty/Mighty, you simply remove the cooling unit and twist this into place. It is very easy to install on your device, and it's just as easy to remove. Once it's installed, you can...
The internal shape of the DabCap V3 is optimized to better fit vaporizers, cartridges, and DynaVaps. This versatile adapter is made from food-grade silicone and its unique design enables you to use almost any of your favorite vaporizers with all...
The DynaVap Fat Mouthpiece will fit onto the end of all DynaVap models. It can be used as a protective mouthpiece for sharing among friends or it can be used to create a seal with a 14mm female water piece,...
Customize your DynaVap setup with this striking wooden stem. The HydraVonG Stem is a must-have for the vaping enthusiast who wants their set-up to reflect their personal taste. DynaVap upgraded the carb of the HydraVonG to reflect recent advancements in carb design....
We’re happy to bring you another beautiful piece from master craftsman Ed of Ed’s TNT, the Wooden Tinymight WPA. These wonderful works of art pair with your Tinymight to bring you a marvelous execution of a simple idea.  Made from...
The 14mm Water Pipe Adapter allows you to use the Heater Vape Tip with your favorite 14mm water piece. It features a sturdy screen so you can simply shake your ELEV8R to stir your bowl. One of my favorite ways...
This is a 3-in-1 solution to using your Fury Edge with your favorite water tool. This official Healthy Rips accessory Water Pipe Adapter is sized to fit 10, 14, and 18mm female joints, and it keeps your vapor path 100%...
The Healthy Rips Fury 2 Water Pipe Adapter is the perfect way to add water filtration to your Fury 2 vaporizer.  The glass bowl fits directly inside of your Fury 2, then the end terminates in a 10mm, 14mm, or 18mm...
The LittleFinger Adapter is the easiest, cleanest, and most convenient way to use any DynaVap tip with a waterpiece. With its universal 10, 14, or 18mm male joint, the LittleFinger truly does adapt to whatever your needs are. Two wide...
The Pass-Through is a unique adapter with a variety of uses. It features 14mm female to 14mm male pass-through adapter, with an added 10mm female adapter on the side. This multi-function adapter lets you: use the adapter as is with...
The Pax 2/3 Hybrid Adapter is constructed with a combination of glass and silicone, delivering the best of both materials for a perfect cooling experience. The silicone connects directly to the Pax 2/3 for a snug fit, while you vape through...
The Pax 2/3 Silicone Adapter allows you to use your Pax 2/3 with either a 14mm or 18mm female water piece. Simply remove your Pax mouthpiece, turn the vaporizer on and set it to your desired temperature, then place the...
Our Master Adapter fits (almost) all your vaporizers to any water tool with a female joint. The adapter itself is actually two separate individual accessories that perfectly fit together. The smaller piece goes neatly within the larger piece so it's...
If you want to hook up your HydroBrick Maxx to a popular 14mm female piece like our C-150, this will allow you to do that.  Simply fit the intake into one end of the included whip, and you're ready to...
The Sticky Brick Jr/Runt Water Pipe Adapter will allow you to use your Jr with your favorite 14mm female piece!  You will be getting massive hits with this new setup and the hits are smooth as can be.  The glass...
The Strong-Arm DynaVap Adapter will allow you to use your DynaVap Tip directly with a water piece!  Simply place a DynaVap Tip into the Strong-Arm and you're ready to hit your Dynavap through a 10mm, 14mm, or 18mm female water...
DOUBLE the capacity and the power of your DynaVap experience with our Devil's Pitchfork glass stem.  Made of thick glass, each stem perfectly fits TWO stainless steel or titanium DynaVap tips.  The dry version features the cooling nipples of our Hula and...
The Wet-winder Glass Stem is a water-use adaptation of our very popular Sidewinder for DynaVap.  Just 5” end-to-end, the Wet-winder spirals your vapor through a pure glass pathway that’s over a foot long.  That extra length and additional surface area cool...