CCell TH2 Oil Cartridges feature a universal 510 thread, a glass tank, and use an industry-leading ceramic atomizer design that provides incredible efficiency for concentrate use. Compared to cotton or silica wick systems the ceramic atomizer provides better oil absorption and performance, even with thick oils. The tops of the cartridges can be removed for easy refilling, while still remaining leak-proof.
They are available in three different capacities (0.3ml, 0.5ml, 1ml), with three different mouthpiece options (red cedar wood, black ceramic, white ceramic).
Our CCell Cartridge Containers or Flip-Top Cartridge Containers are perfect ways to store or transport your CCell TH2 Cartridges.
We recommend the 510 Cartridge Stand and the Glass Syringe w/Blunt Tip to make filling TH2 cartridges a piece of cake!
These Glass Syringes are the perfect way to fill a TH2 Cartridge or to dispense your concentrate! The Syringe is made from glass and features a Luer Lock to keep the syringe contents fresh. The Short Blunt Tip Needle attaches to the Syringe for easy and mess-free filling or dispensing of your favorite concentrate. The Syringe includes graduated markings so you can carefully control how much you fill, and comes in a convenient plastic case with a magnetic clasp.
The DynaVap Fat Mouthpiece will fit onto the end of all DynaVap models. It can be used as a protective mouthpiece for sharing among friends or it can be used to create a seal with a 14mm female water piece, enabling you to cheaply and easily turn any DynaVap into a water-cooled vaporizer. A very inexpensive and effective way to add water conditioning to any DynaVap model.
Please note - the Fat Mouthpiece will not fit into the opening of the DynaStash, you must remove it before placing your DynaVap into the DynaStash.
The Honest Butane Torch Lighter is a great solution for use with all Sticky Brick and DynaVap products (as well as many others!). The torch features a dust cover connected with a chain, and is ignited by simply pressing down the button on top. Be sure to use at least triple-refined butane for best results and lighter longevity.
Due to postal laws we are unable to ship torches prefilled.
The Sneaky Pete Master Adapter™ fits almost all vaporizers to any water tool with a female joint. The adapter itself is two separate individual accessories that perfectly fit together. The smaller piece goes neatly within the larger piece so it's all one very convenient package less than 1.5" tall. The smaller adapter has a gradual inner taper for more narrow round tips, while the larger adapter has distinct cutouts for specific vapes.
Together, they fit your bong to any cartridge and all DynaVap stems and bodies. They also adapt for the Arizer Solo2, Air2 and ArGo, the Flowermate V-5 Nano, the DaVinci IQ, the RBT Splinters, the E-Nano… Pretty much any vape with a round mouthpiece works with this accessory thanks to its innovative design and silicone flexibility. The Master Adapter covers more vapes than any other adapter on the market.
Key Features:
- 100% silicone, durable and shape-able- For 10mm, 14mm and 18mm female joints- Works with more vapes than any other adapter- The most affordable way to adapt the most vapes for water use
Spare O-rings for all of your DynaVap vaporizers. These are the identical rings, sourced directly from the manufacturer, all OEM high-temp rings. If you need new condenser O-rings for any device (except the OmniVap), select the Condenser option. If you need the O-rings for your tips or for the OmniVap Condenser and mouthpiece, select the Tip/Omni option.
**Do not over-tighten the adapter onto your vaporizer! It only needs a slight/eighth turn, over-tightening will damage your vaporizer.**
This water pipe adapter is designed to fit Crafty and Mighty vaporizers to take your vaping to the next level. Plumb in a water pipe to your vape set-up for cooler vapour, concentrating it through percolation for larger and cloudier hits. The adapter comes in 14mm and 18mm male vaporizer joint variations, and connects universally to 10mm, 14mm, and 18mm female water pieces.
Easy to install, simply remove the cooling unit on your vaporizer, then line up the slots on the adapter with the holes on your device. Very slightly twist the adapter to secure it; an eighth turn will make it completely secure. Be sure not to twist the adapter too much! Over-tightening will damage your vaporizer.
Once the adapter is secured, attach your modified vaporizer to your water pipe of choice and enjoy fresh water hits. Highly recommended for Crafty and Mighty users for a superior vape experience.
Key Features:
- Compatible with Crafty, Crafty+, Mighty, or Mighty+ vaporizers- Durable plastic housing contains borosilicate glass for a pure vapor path- Replaceable screen included- Easy to assemble - Available with a 14mm or 18mm male vaporizer joint- Universally adapts to 10mm, 14mm, and 18mm female water pieces
When glass meets glass, ensure the connection stays secure with our plastic Keck Clips. Whether you're securing a freshly filled bowl of flower, or keeping your mouthpiece or Sidestep Adapter firmly in place, these clips ensure that your glass stays safe and attached, helping you avoid mishaps and breakages. Keck Clips are sturdy and stiff, but won't scratch your glass piece. For peace of mind, get clipped.
The DynaVap SnapStash is an airtight storage container for taking your favorite herbs on the go. It's easy to conceal, and it secures tightly with a confident snap. Simply squeeze the upper portion of the tube to open your SnapStash, load it with ground herb, and away you go! The SnapStash is available in either a small or large variant.
The Mighty Vaporizer Stand is a perfect way to enhance your Mighty experience! It allows full access to all functions and buttons on the Mighty while it's in the stand, meaning you can charge and change temperatures while your Mighty sits happily upright on your desk. The stand is made from a hard and durable polycarbonate that will last for years while not scratching your Mighty.
With the Mighty in a vertical position, viewing the screen and changing temperatures is much easier, it's the stand that the Mighty should have included! Once you put it onto your device you will leave it on!
Key Features:
- Designed specifically for the Mighty by Storz & Bickel- Charge & change temperatures while in the stand- Your Mighty will stand securely in place on a desk or table- A must-have accessory for any Mighty owner!- Secure fit
Extend the Life of Your Flower with the Sneaky Pete Half-Bowl Converter
What if I told you that you could increase the amount of time that your flower lasts with one small addition to your DynaVap tip? The Sneaky Pete Half-Bowl Converter is useful to any DynaVap owner who wants to improve the efficiency and ease-of-use of their device.
Precision Design and Quality Manufacturing
Designed by Sneaky Pete and manufactured by DynaVap to the high level of precision and quality they are known for. This Half-Bowl Converter kit includes a stainless steel version, a titanium version, and a titanium CCD, to turn any DynaVap tip with an adjust-a-bowl into the perfect half-bowl setup.
Simplified Use and Maintenance
While the stock adjust-a-bowl is great, getting the CCD perfectly locked into the half-bowl position can be time consuming and difficult, especially if your CCD is less than pristine. The Half-Bowl Converter eliminates this problem. Pop the Half-Bowl Converter into the tip and your CCD will easily snap into place. It takes seconds and there is no chance of it coming out unless you want it to (but you won’t want it to!). It's also super easy to remove for cleaning, swapping to the other metal type, or if you want to switch back to a full bowl.
Enhanced Thermal Mass with Stainless Steel
The new stainless-steel version of the Converter adds even more thermal mass to your half-bowl setup, supercharging it to be able to take down a half-bowl load entirely in one hit by boosting the efficiency of vaporization. At 0.075g compared to the titanium version’s 0.045g, the stainless-steel Half-Bowl Converter has a clear weight difference and a slight bronze color compared to the titanium, so it’s easy to tell them apart. During in-house tests, we were seeing some of the biggest DynaVap hits that we’d ever produced. A nice side-effect, for sure.
Titanium for Purity and Flavour
We love the stainless, but the titanium Half-Bowl Converter is no slouch. The power boost is a little less pronounced, but vapers who prioritize flavour will appreciate the purity that titanium brings to the vaporization process when you’re refreshing your bowl often.
Versatility and Cost Efficiency
The Sneaky Pete Half-Bowl Converter works with induction heaters or a torch and is a super inexpensive accessory that will pay for itself quickly, thanks to the improved efficiency. Get more bang for your buck and enjoy your flower for longer with the Sneaky Pete Half-Bowl Converter.
See the full review of the Sneaky Pete Half-Bowl Converter here.
These official Healthy Rips Dosing Capsules are the perfect accessory for a simple load and go experience with your Healthy Rips Vaporizer. Simply put, these caps will keep your pre-loaded herb secure, great for a quick pack of your vape at a moment's notice. Plus they come with the added bonus of keeping your bowl cleaner for longer. Which means less time cleaning your vaporizer and more time enjoying the goodness it provides.
This handy pack of four dosing caps comes encased in a clear tube for super convenient portable storage. Before you set off for the day, you can easily pre-load the caps by scooping directly through your stash, lightly packing the herb and popping the cap back on. The cap is a little tricky to remove, especially for those of us with big clumsy fingers, but you can blame that on the secure seal that’ll keep your pre-packed herb safely within.
One thing to note is that the dosing capsules get very hot during use, so take care while removing them from a warm device, or let it cool for a few minutes before switching them out. The capsules themselves absorb lots of heat, so you may need to compensate by increasing the temperature on your vape when using a capsule.
They come in two sizes, with a perfect fit for either the Healthy Rips Fury 2 and Fury Edge, or the Rogue. These capsules also fit other devices like the POTV One vaporizer and the TinyMight. This is a perfect accessory for your Healthy Rips vaporizer that’ll make each session almost too convenient, and no clean up!
Key Features:
- Load and Go!- 100% pure stainless steel- Set of four w/ plastic capsule case- Dimensions: 10.5mm x 11mm - Capsule capacity: 0.09-0.11g
Sometimes your tools need tools, the Scrape & Stir Tool is made for that situation.
Coming in at 4” in total length and made from stainless steel, its comfortable feel and dimensions mean it will fit snugly in your hand, if you’ve found other vape tools too small, that won’t be a problem here. The Tool is composed of two sections: a 2.5” reinforced stirring/poking end and a 1.5” grip section. The stirring section is nice and long to get into deep bowls with ease, for general vape work and maintenance, or even to scrape off that stubborn detritus! The grip section is super useful for tamping down your bowl or to help place a DynaVap CCD in position.
Finally, a stable, lengthy, and comfortable Scrape & Stir Tool that isn’t made for ants!
The Sneaky Pete Vape Tool is a 3" long stainless-steel multi-tool that’s great for loading extracts, stirring a bowl, scraping gunk off your vape or glass piece, and all kinds of other handy tasks.
One end is rounded, curved and scooped so you can get herb out of corners and clean in small spaces, and the middle grip is flattened to help you easily hold and control the Vape Tool with your fingertips. Best of all, we sell the Sneaky Pete Vape Tool in a five-pack, so you can keep a few around the house and have extras for backup.
The Hula Stem V2 pairs with a stainless steel or titanium DynaVap tip to add cooling and the purity of glass to your DynaVap experience. Simply place any DynaVap tip onto the Hula Stem and heat like normal. The stem will help to cool down your vapour with its indentations that add surface area to the vapor pathway. By replacing your current DynaVap body with a glass Hula Stem V2, you are creating an incredibly pure vapor path, many people prefer glass, even over the higher-end metals like titanium.
** DynaVap Tip NOT included.
Key features:
- Indentations add surface area and help to cool vapor - Enhanced tighter fit- Add the purity of glass to the DynaVap- 2.5" total length- Available in seven different color options
The Strong-Arm DynaVap Adapter will allow you to use your DynaVap Tip directly with a water pipe! Simply place a DynaVap Tip into the Strong-Arm and you're ready to hit your DynaVap through a 10mm, 14mm, or 18mm female water pipe. This is the easiest and most convenient way to use your DynaVap through a water pipe, and your vapour will touch nothing but the purity of glass.
Key features:
- Works with 10mm, 14mm, or 18mm female water pipes- Enhanced tighter fit- Approximately 3" in length
Cool Down Your Arizer Vaporizer
The Arizer 3D Flow Stem features visually striking and functional divots throughout the length of the stem to increase the surface area your vapor passes over. The increased surface area allows for more cooling of the vapor, resulting in a smoother draw. The divots do not restrict the airflow in any way, and the stems provide a clear draw for large and cool hits.
Key Features:
- Compatible with the Arizer Solo, Solo 2, and Air 2, Air MAX, Solo 2 MAX- The increased surface area provided by the divots reduces the vapor temperature- Great airflow- Easy to clean- Divots are visually striking- Durable glass construction
Everyone likes their glass, adapters and equipment to look and operate like it's brand new. We want to make sure that you can keep your tubing looking and operating at peak performance for a reasonable cost.
The 36” Globe Whip Tubing is designed especially for our C-150 and C-250 globe glass water pieces and is an exact replacement for the original tubing. Our tubing can replace your whip when it becomes too dirty, or even to add length to your existing whip if you’d like a longer extension from your water piece. Look sharp, with the Globe Whip Tubing extension/replacement.
From the groundbreaking engineers at CCell, the M3b Battery is their first cartridge vape battery to feature variable voltage power settings. It introduces single button operation that allows you to pre-heat the cartridge and choose between three different vaping temperatures, giving you full control of your experience. The five button presses necessary to power the device on also makes it somewhat child-proof. The M3b is slim and pocket-friendly, but a single full battery charge can last for over 150 hits!
The CCell M3b Battery pairs perfectly with almost any 510 threaded oil cartridge, but we recommend using the M3b with CCell TH2 Oil Cartridges, they’re our favorite cartridge due to their industry-leading ceramic atomizer that will work with even a thick concentrate consistency.
The Incredibly Compatible DabCap V5
Introducing the solution to all your water woes! The DabCap V5 is the ultimate accessory for enabling you to use your favourite water pipe with almost any vaporizer. The newest DabCap V5 includes a brand new lanyard ring (lanyard included) so you can bring your DabCap anywhere you go! It's also glow-in-dark/UV light reactive, and is more compatible than ever, working with virtually every 510 cartridge and pod vaporizer on the market.
Works With Any Water Piece You Can Imagine
The tapered outer shape fits all size/style glass joints and the inside features custom cutouts compatible with nearly all dry herb vaporizers, pen and pod vapes as well as most pre-filled cartridges. The DapCap V5 provides an air-tight fit with your flat-tip, tapered and round-tip mouthpieces as well as some of the newer pod systems. These work brilliantly when paired with any DynaVap and your favourite water pipe.
Use With Cartridges, Pods, And Vaporizers
The DabCap V5 adapter is the quickest, most straightforward and cost effective way to completely switch up your vaping game. This adapter gives you the freedom to connect almost any vaporizer with any glass pipe and open opportunities to enjoy much smoother and more filtered hits from your vapes. Crafted from premium food-grade silicone, the DabCap V5 provides a super pure air path to keep your vapour fresh, tasty, and of the utmost quality. It’s pretty much indestructible, it's anti-static coating won’t pick up dust or hair if you accidentally drop it, and can handle heat up to 550°F. This little adapter is super handy to have around, you wont realise how much you had needed one until you’ve got one in your vaping toolkit.
Incredibly Affordable, Highly Useful Accessory
The unique design of the DabCap V5 is built to a high standard with versatility in mind. Being capable of partnering any water pipe with almost any vaporizer, this adapter is sure to connect you to a higher appreciation of vaporizing through a multitude of accessories. At such an affordable price, you’d be bonkers not to add this nifty accessory to your collection.
The DynaVap DynaCoil is made from a single piece of precision-engineered titanium and works to fully vaporize almost any variety or consistency of concentrate. The porous design of the DynaCoil allows the concentrate to soak in and fully saturate the coil, meaning a lot of surface area for vaporization of your concentrate and great airflow regardless of your load size. This method of vaporization means you get outstanding flavor and great efficiency from your concentrate. A must-have accessory for any DynaVap owner interested in concentrates!
