Mad Heaters

Tempest Accessories — Case, Screens & Glass Adapter Essential upgrades and replacements for the Tempest V1 and V2 — precision-made components built for convenience, protection, and hands-free use. Sorry, your browser doesn’t support embedded videos. Overview The Tempest Accessories bring together the most useful add-ons and replacement parts for the Tempest V1 and V2. From durable stainless steel screens to a precision-fitted case and hands-free glass adapter, each piece enhances your experience while maintaining the premium quality the Tempest is known for. Tempest Case The Tempest Case is a silicone-lined stainless steel body with an aluminium cap and integrated herb storage compartment (approx. 1–1.5 g of ground material). The case includes a removable Debowler and C-tool, while the lid features a built-in magnet and socket tool for Tempest caps. Measuring 163 mm × 25 mm and weighing 51 g, it’s the ideal travel companion to keep your Tempest safe and ready. Tempest Ball Retaining Screen (V2) The Ball Retaining Screen (V2) is a 3-piece stainless steel kit that holds the ruby or quartz balls securely within the Tempest V2 heating chamber. Built to exact specifications, it maintains consistent airflow and heating efficiency for optimal performance. Tempest Bowl Screen (V2) The Bowl Screen (V2) includes three precision-cut stainless steel screens designed to replace the originals in your Tempest V2. These maintain perfect spacing and airflow for reliable, even extraction session after session. Tempest Glass Adapter V3 The Glass Adapter V3 is compatible with both the Tempest V1 and V2, allowing for hands-free use with the iSpire Wand. Its shorter cup design provides more efficient heating and reduced battery usage while offering improved visibility of the visual indicator through the glass. The inner diameter is 14 mm for a perfect fit with standard glass setups. Why Choose Tempest Accessories? Premium Materials: Stainless steel, silicone, and anodized aluminium. Hands-Free Heating: Glass adapter integrates seamlessly with the iSpire Wand. Smart Storage & Tools: Integrated magnet, Debowler, and C-tool in the case. Precision Performance: Replacement screens maintain airflow and consistency. Final Thoughts The Tempest Accessories round out your setup with practical, high-quality additions. From the rugged case to the fine-mesh screens and hands-free adapter, each part enhances usability, efficiency, and protection — a must-have collection for any Tempest 2 owner.

Read more less

Tempest 2 Ball-Vape by Mad Heaters — Insanely Powerful Portable Performance 🔥 Desktop-level power in your pocket. The Tempest 2 ball-vape delivers full-spectrum flavour, rapid extraction, and precision engineering wherever you go. Overview The Tempest 2 from Mad Heaters is a next-generation portable ball-vape that brings zirconia-ball convection power into a compact, stylish form. Designed for flavour chasers, cloud builders, and experienced users who demand more from their sessions. Available in multiple colour finishes, the Tempest 2 offers something for everyone — from sleek titanium to warm wood-tone aesthetics. Key Upgrades & Features Full extraction in a single heat-up — intense performance, every session. Zirconia-ball thermal core — advanced convection for even, clean vapour. Adjustable bowl (0.1–0.2 g) with twist-to-lock screen for micro- or full-loads. Visual temperature gauge + click indicators for precise control. Titanium & zirconia construction — premium durability and flavour purity. Induction & torch compatible — works with iSpire Wand, YLL 3.0. High-flow stem & adjustable carb for custom airflow and density. Advanced cooling unit for smooth, cool draws. Multiple premium finishes to match your setup. How to Use the Tempest 2 Loading the Bowl Unscrew the cap and fill by pressing into your ground material or use the hoover/straw method. Keep threads clean and ensure good airflow — light tamping only. Gently screw the cap on, avoiding contact with steel surfaces to prevent residue burning. Heating with a Torch Hold the flame tip about 1 cm (⅓ inch) from the cap. Rotate slowly for even heating and listen for the click indicator. Never heat the visual indicators directly. Dual- or triple-flame torches deliver the best results. Heating with the Wand Induction Heater Press the Wand’s main button twice to start. Set ~290 °C (550 °F) for the zirconia balls and wait for “Time Over.” Adjust temperature or adapter depth for preference. The Wand delivers consistent, repeatable heating without manual tracking. Debowling Use the magnetic tool, leather case, or cap-lid tool to safely twist off and empty used material. Do not touch hot metal parts directly. Store the device in the leather or Tempest case even if the cap is still warm. Pro Tips for Best Performance Take long, slow draws while keeping the air hole covered for most of the draw. Click discs may slightly shift in the first 10–30 uses—this is normal. For earlier clicks and more convection flavour, move your torch closer to the air slots. On re-heats, stop around one indicator mark earlier than the first cycle. Avoid heating the indicator area—it's for reference, not a target zone. Compatible IH units: iSpire Wand & YLL IH 3.0. Adjusting Airflow Cap Airflow Loosen the top screw, rotate the induction sleeve for your desired airflow, then retighten. Stem Airflow Loosen the mouthpiece and rotate the heat shield to adjust or close the intake port — complete control over resistance and vapour thickness. Specifications Dimensions: 122 mm × 18.5 mm Weight: 43 – 46 g (depending on heat shield material) Materials: Grade 5 Titanium / Zirconia / Stainless Steel / Anodised Aluminium or Wood Shield Bowl Capacity: Adjustable (~0.1–0.2 g) Heating Method: Torch or Induction (iSpire Wand, YLL 3.0 compatible) Cooling Unit: Medium (Long) with adjustable carb system WPA Compatibility: 10 mm / 14 mm / 18 mm What’s Included Tempest 2 Device Pre-installed 3 mm Zirconia Balls Medium Cooling Unit Spare O-rings (4 pcs – 6×1 / 8×1) Bowl Screens (3 pcs) Ball Screens (2 pcs) C-tool & tube for screen setup Extra Zirc balls + replacement Click Disc Setup accessories (small screw and spare parts) Why Choose the Tempest 2 The Tempest 2 refines everything great about its predecessor: enhanced airflow, increased bowl capacity, better heat spread, and effortless compatibility with torch or induction heating. It’s the most complete portable ball-vape experience available today. Great White North Vaporizer Company presents the Tempest 2 — engineered for flavour seekers, cloud builders, and true portable performance. Choose your finish, master your technique, and unleash next-level extraction.

Read more less

Mad Heaters Reload 3 — Aluminium Storage & Tool System An all-in-one aluminium storage and tool solution built for the Tempest, Dynavap, and other magnetic cap devices — compact, airtight, and made to last. Sorry, your browser doesn’t support embedded videos. Overview The Mad Heaters Reload 3 is a precision-engineered aluminium storage and tool system designed for Tempest users, Dynavap enthusiasts, and anyone who wants a durable, modular, and magnetic setup. Built for convenience and functionality, it keeps everything you need in one sleek, compact body. With multiple airtight containers, integrated tools, and a built-in cooling magnet, the Reload 3 streamlines every session — whether you’re at home or on the go. Key Features All-in-One Aluminium Design: Compact, durable, and fully modular system for storage and tools. Three Airtight Containers: Includes bottom pot (28ml, ~3g), mini pot (20ml, ~2g), and ABV pot (28ml). Built-in Decapper: Compatible with Dynavap Caps — Standard, Armored, and Hyper. Tempest & Tornado Compatible: Opening tool built into the underside of the lid for Tempest V1, V2, and Tornado. Cooling Magnet: Safely cools and stabilises hot caps between uses. Adjustable CCD Inserter: Works with the Tempest; fixed half-bowl for Dynavap users. ABV Pot with Removable Debowler: Keeps your spent material separate and easy to clear. Integrated Tamper: Built into the bottom of the pots for on-the-fly use. Precision Machined: Note - small marks may be visible from the anodizing process. Specifications Material: CNC-machined anodized aluminium Size: 97mm × 38mm Weight: 85g (with 3 pots) Pot Capacities: Bottom 28ml (~3g), Mini 20ml (~2g), ABV 28ml Performance & Design The Reload 3 is engineered to bring everything together — storage, maintenance, and workflow — in a single precision-made tool. The airtight containers preserve freshness, while the built-in decapper and CCD inserter simplify setup. The cooling magnet keeps things safe, and the overall feel is solid and intentional — the mark of a Mad Heaters design. Why Choose the Reload 3? Designed for versatility and built from premium materials, the Mad Heaters Reload 3 is a must-have for any butane vaporizer setup. Whether you’re packing, storing, or cooling, it handles every task efficiently in one cohesive system. It’s the ultimate carry piece for Tempest and Dynavap users who value both form and function. Final Thoughts The Reload 3 is more than a storage tool — it’s a complete session companion. Compact, intelligent, and crafted from anodized aluminium, it keeps your essentials clean, accessible, and secure. Built for those who take their ritual seriously.

Read more less