All Products

Bonger Silicone Water Pipe Adapter Those who think there’s only one way to skin a deer aren’t being creative enough. The boys at DynaVap get that, big time, and are always finding new ways for you to enjoy your current products in new and valuable ways. Enter the DynaVap Bonger, a new silicone accessory to use your favourite DynaVap tip and cap combination through a water piece. Use With Any Tip & Cap DynaVap is respected for the flexibility in their lineup, and this ingenious little guy is the perfect way to interface a DynaVap with a water piece. The Bonger works with any current tip and cap in their roster, showing the tendency towards compatibility that DynaVap has worked hard to establish. Stainless Airpath Only 45mm in length, the Bonger works with both 10mm and 14mm water pieces directly without needing another adapter. We’re really stoked on the stainless-steel condenser that runs directly from the CCD in your tip down through the Bonger and then out to the water piece. This takes the Bonger beyond just an adapter and adds both the purity of a stainless airpath and the easy-cleaning nature of metal to the system. Affordable & Airport-Free And for the first time ever… this DynaVap does NOT include an Airport! I know right? Mind blown. But the airflow is perfect for maximum thickness and milkiness action; adding additional airflow is totally unnecessary, this is engineered for performance. This super affordable accessory comes in black or green/black variation. If you already own a DynaVap tip and cap, the Bonger is your easy avenue to using them through water, which is probably our favourite way to use a DynaVap to begin with.

Read more less

These adapters will allow you to use any 18mm male joint with your favorite 14mm female water piece! The adapters are sturdy and approximately 2.5" tall, and will work with your favorite water piece and vaporizer adapter.

Read more less

These are official Healthy Rips replacement O-ring/Stainless-Steel Screen sets made to fit the Fury Edge SE or the Rogue SE. They come in a set of two and are perfect replacements if you've lost yours or just want some backups.

Read more less

Chilling Power, Invincible… is the Chill Steel Pipe Actually Superman? Chill, baby, chill, have an “ice” day. There’s something about hearing devices referred to as “unbreakable” or “the last one you’ll ever need to buy” that makes it sound like… a challenge. Well, we put the Chill Steel Pipe through its paces and were more than satisfied with the durability of this incredible, insulated, stainless steel water pipe. It's no wonder that it comes with a lifetime guarantee. Super Powered with a Pure Airpath This is for real, the last water pipe you’ll ever need to buy, a one-time purchase that will last you forever, as long as you don’t lose it. Rather than being constructed from glass like traditional bong style pipes, the Chill Steel Pipe is made from food grade stainless steel with double wall vacuum insulation, akin to a premium reusable water bottle. The interior is lined with a patented ceramic coating that hits, tastes, and cleans up as easily as glass does. Even the Downstem is Indestructible The Chill Steel Pipe also includes an indestructible aluminium downstem and glass bowl to complete the package. The downstem has a 14mm female sized joint, so you’re able to use it with your favourite vaporizer and water pipe adapter. The gaskets are made from food grade silicone, to continue the theme of purity. The Chill Pipe Begs to be Filled with Ice One of my favourite things about the Chill Steel Pipe is how easy it is to use with ice. For the ultimate in cooling-power, simply remove the neck of the pipe by twisting it, fill it 2/3 full with ice, add water to the ice line and get ready for the coolest vapour you’ve ever experienced! As easily as you can add ice, you can also clean the Pipe completely with isopropyl alcohol, just like you would a glass pipe, but without the fear of breaking it. An Iconic Piece that will Last Forever This substantially sized water pipe comes in four different colours and will be the focal point on your shelf, for sure. The Chill Steel Pipe is a killer new option for those seeking the bong experience without having to worry about breaking anything. This unbreakable Pipe with unbelievably cool hits will be an everyday driver in your collection for many years to come.

Read more less

The Cadillac of E-Nails The MiniNail is designed, engineered, assembled and packaged in the USA. It’s built to premium quality standards using only first-class materials, including third party tested pure titanium. The setup is small enough to go with you anywhere, but it’s heavy-duty enough to be your desktop daily driver. The MiniNail runs at very low power, about 20% of a normal e-nail, meaning it is cheaper to operate, very safe, and it will last longer than other e-nails. The manufacturer stands behind the MiniNail with a 2-year warranty on both the power/control box and the heating coil, something that’s almost unheard of in this industry. There is a very accurate digital temperature display, and the ideal range is 400 to 600°F, but it can go up to 1,000°F to do burn off cleanings. Ready to Plug In and Go Each kit includes a MiniNail power control box of your color choice and a hybrid coil heating element. One kit comes with a premium quartz E-banger and includes a glass carb cap and dabber. The other kit has a hybrid quartz/titanium universal nail with a multi-tip dabber/carb cap tool and two quartz dishes (titanium dish no longer included). Both include a 6' power cord and silicone dab mat. Our Go To Concentrate Solution Winner of our 2019 Vape Award for concentrate product of the year, the MiniNail is our daily driver for concentrates, and it'll soon become yours too!

Read more less

Cool your VENTY Without Water The VENTY is our go-to for an abundance of power from a portable. These incredible devices deliver big, pure, heavy clouds with ease and, we get that an intense hit can sometimes leave you craving a cooler experience. When a water piece isn’t practical, the XL Rocket Stem for VENTY is. Unleash Cooling Power with Disruptive Glass Beads An innovative product, the Rocket Stem offers substantial cooling in a compact form. With a built-in screen and easy maintenance, this stem incorporates practical glass beads that not only provide cooling but also help to trap any flower pieces, ensuring a smooth and clean vape session. All of the additional surface area and air dispersion provides a much cooler vaporization than going native. A Sexy Sight with Tri-Coloured Bead Design The XL Rocket Stem contains a captivating array of red, green, and dark blue beads. This unique design disrupts the vapour's direct path, significantly cooling it down. As the vapour makes its journey through the glass beads, they absorb heat, resulting in an even more enjoyable vaping experience. The beads are secured by glass pinches, guaranteeing they stay in place, no matter where you take them. This is the Ultimate VENTY Stem Measuring just over 4" tall, the Rocket Stem is perfect to take on the go, delivering exceptional cooling that surpasses what a regular straight glass stem can provide. When you're embarking on an adventure with your VENTY, the XL Rocket Stem is the ideal accessory to achieve a rich and flavourful vapour, all without the need for water. Elevate your vaping experience with the XL Rocket Stem for VENTY, your ticket to cool, satisfying hits wherever you roam.

Read more less

Cool Down your VENTY Vapour If you have tried a VENTY, and chances are you have if you’re reading this, then you are fully aware of incredible power from this portable made by the most prominent name in vaporizers, Storz & Bickel. For both cloud chasers and casual vapists, adding water to your VENTY setup is a no brainer, and with the VENTY Water Pipe Adapter, it is very simple to do. Tough Where it Needs be, Tender Where it Should Be This Water Pipe Adapter has been measured and engineered so that you’ll be able to easily use your VENTY with a water pipe. The silicone construction, along with an internal metal tube that runs the length of the stem, is rigid enough to hold your VENTY securely in place but also gentle enough not to damage your device. It’s kind of like that Phil Collins song, “Easy Lover.” One Adapter, Two Sizes Easy to install, just remove the native cooling unit from the VENTY and twist the Adapter in place. That’s it! The Adapter will work with either 14mm or 18mm pieces, so most of your glass collection should now be available to use with your VENTY. Chase the Biggest Clouds More Comfortably As the VENTY is a tall device, we definitely recommend keeping a hand on it during use when using with a water piece. Not only is the VENTY tall, but it’s a powerhouse that’s easily capable of milking up water piece, so put it through its paces with less harshness on your throat. Enjoy the Volcano output from this portable package with greater comfort with the help of the VENTY Water Pipe Adapter.

Read more less

At this point, the Puffco Proxy is one of my daily drivers; I can’t get enough of its usability and aesthetic, but the vapour can be pretty hot. We’re proud to offer our first piece for the modular from Puffco to truly make the Proxy be what you want it to be, the Flask Bubbler. Customization makes a device truly yours, so let’s explore this option. As mentioned, the only real knock on the Proxy is that if you’re using it as it was provided to you, all of your intake is through a dry, pretty short airpath and that leads to some coughing and sore lungs with extended use. The Flask Bubbler lets you add water to the equation and you’ll notice the difference right away. It features direct Proxy integration; you don’t need a water pipe adapter for a stand-alone water piece in this case. Rather, the Flask Bubbler IS the water piece, designed to fit perfectly with the base of the Proxy. Standing 6” tall, the Flask Bubbler has a wide base for stability that also increases the size of the water reservoir with the flask style shape providing substantial cooling. The Proxy’s airpath will now lead through a disc percolator that has an abundance of slits for amazing airflow and little bubbles that would make Dom Perignon jealous. If you like using your Proxy dry, you’ll absolutely love it through water because you can use higher temps, which means larger dabs and more fun all around. The Flask Bubbler features a comfortably curved mouthpiece to keep your face away from the hot end, and the arm is bolstered to the main body for additional stability and strength. After using the Proxy through water, it’ll be difficult to go back to using it dry, but luckily, it’s a decision that’s easy to make and unmake, based on your whims and desires. So, fill your flask from the cup of life and drink deeply, enjoying your new Flask Bubbler.

Read more less

This bowl will fit into 14mm female joints. Three grips make it easy to use for the biggest hits!

Read more less

Adapters are Cheaper Than New Glass These adapters will allow you to use two male joints together.  The adapters are sturdy and approximately 2.5" tall, and will work with your favorite water piece and vaporizer adapter.   Two Sizes Fit Your Needs To attach two 14mm male pieces, select the 14mm Female to 14mm Female Adapter. To attach one 14mm male and one 18mm male piece, select the 14mm Female to 18mm Female Adapter.

Read more less

Vestratto Tornado — A New Spin on Perfection 🌪️ The Vestratto Tornado takes the legendary Anvil platform and pushes it to the edge of possibility — adding a secondary atomizing chamber that creates a whisper-smooth, fog-like vapour unlike anything else on the market. Sorry, your browser doesn’t support embedded videos. The Tornado by Vestratto — next-generation atomization and airflow precision. Overview The Tornado is Vestratto’s boldest evolution yet, merging the proven performance of the Anvil with an innovative secondary atomizing chamber that refines vapour to a soft, breathable mist. This design allows massive output without harshness, delivering a uniquely comfortable yet powerful experience. Revolutionary Atomization Technology The Tornado’s integrated secondary atomizer transforms coarse vapour into micro-particles, improving smoothness, flavour, and efficiency. Powered by Vestratto’s Internal CopperCore, it maintains unparalleled heat transfer and consistency across sessions — achieving optimal bioavailability and extraction depth. Precision Engineering & Design Built with medical-grade stainless steel and encased in a durable magnetic shell, the Tornado supports both torch heating and the FORGE induction system. Airflow can be customized through breath control or adjustable stems, letting you fine-tune draw resistance and vapour density with precision. Tornado XXL Herb Chamber The XXL Herb Chamber offers 55% more capacity than the ThermoCore XL Bowl, accommodating roughly 0.3 g of medium-grind herb. Its hexagonal grip makes handling effortless, while a loose pack promotes even convection and maximum performance. Cautionary Note The Tornado’s extended copper layer expands and contracts as it heats. Always insert threaded bowls into a cool oven and avoid overtightening to prevent thread binding. As with early Anvil adopters, experimentation is part of the learning curve — and the reward is exceptional. What’s Included 1 × Tornado Unit 1 × 14 mm WPA Adapter 1 × Tornado XXL Herb Chamber An Evolution, Not a Replacement While the Anvil remains an icon, the Tornado reimagines the formula with expanded airflow, greater capacity, and next-level vapour refinement. It’s not just a sequel — it’s an alternate take for those chasing unfiltered performance. Small-Batch Perfection Each Tornado is hand-assembled in limited production runs, showcasing the craftsmanship that defines the Vestratto brand. Minor variations reflect its artisanal nature, but every unit meets the same uncompromising standard of excellence. Frequently Asked Questions What’s new about the Tornado? The Tornado introduces a secondary atomizing chamber that refines vapour into an ultra-fine mist for smoother hits. How much herb can it hold? The XXL Chamber fits around 0.3 g of medium-grind herb — about 55% more than the ThermoCore XL. Can I use it with an induction heater? Yes — it’s fully compatible with the Vestratto FORGE induction system as well as The Wand, IH 3.0 etc, and traditional torches. Does it work with existing Anvil parts? Some components and stems are cross-compatible, though performance is tuned specifically for the Tornado system. Any maintenance tips? Always cool before disassembly and avoid overtightening threaded parts to protect the copper interface. Final Thoughts The Vestratto Tornado is a bold leap forward in convection design — blending artistry, engineering, and innovation into one storm-worthy package. If you crave massive clouds with unprecedented smoothness, the Tornado delivers an experience that truly lives up to its name. Read our full Tornado review here.

Read more less

If you’re anything like us, you can’t get enough of experimenting with different setups using tools from your vape arsenal. Batman is always making Alfred create experimental gadgets, like Batarangs with smoke bombs attached, so let me be your vape-Alfred and facilitate your experimentation by offering the 14mm Water Pipe Adapter for the Tinymight. Everyone’s favourite portable dry herb vape from 2021 has one issue: its vapour output heavily outweighs its native cooling capacity. It's much more pleasant to use it with water cooling, but there are no parts included with the Tinymight to make that possible. This 14mm Water Pipe Adapter is the perfect solution. It features a permanent glass screen with good airflow and slides snugly into the body of your Tinymight. The commonly used 14mm size of the Adapter gives you a secure connection with your glass water pipe and the tough construction means you can use the weighty Tinymight at an angle with no worry about breakage. Measuring 3.25” in length and a great aesthetic fit with the device, you’ll now be able to add as much water filtration as you'd like, to get the level of cooling that you’re seeking.  If you don’t have anything on your vape utility belt yet, adapters are always a good choice as the first addition. Open up the capabilities and possibilities of your portable vaporizer with the 14mm Water Pipe Adapter for Tinymight.

Read more less

Arizer Evolution Stem – Next-Gen Cooling for the Solo 3 & Arizer Lineup The Arizer Evolution Stem is the next step in dry vapour cooling technology, designed specifically for the Arizer Solo 3 but fully compatible with the Arizer Solo and Air lineup. This premium cooling stem is filled with glass cooling beads, which force vapour through a complex path, absorbing heat for a smoother, cooler draw—without the need for a water piece. If you find default Arizer stems too hot but don’t want the hassle of water filtration, the Evolution Stem is the perfect middle ground. Three Versions to Suit Your Style The Arizer Evolution Stem comes in three different versions, each offering a unique experience: 1. Glass Screen – Regular (For All Arizer Models) Features a permanent glass screen with four air holes Recommended for all users Compact and easy to use on the go 2. Glass Screen – XL (Ideal for Solo 3 & Larger Bowl) Features a permanent glass screen with five air holes Larger bowl provides more capacity compared to the regular version Works with any Arizer Air or Solo, but optimized for Solo 3 users 3. High-Airflow XL (Maximum Draw Freedom - Optimized for Solo 3) Uses a metal screen instead of a glass screen Extremely free airflow, ideal for those who find Arizer stems too restrictive Larger XL size for even better vapour cooling Multicolour Glass Beads for Maximum Cooling Inside the Arizer Evolution Stem, multicolour glass beads act as a cooling mechanism, forcing vapour through a longer, more complex pathway. This ensures that the vapour cools significantly before reaching your lungs - delivering a smoother, more enjoyable session without the need for a water adapter. With a 4.5-inch length, the Evolution Stem offers noticeably cooler hits compared to standard Arizer stems, making it a game-changer for dry cooling. Easy Cleaning – Like New in Minutes One of the best features of the Arizer Evolution Stem is how easy it is to clean. Since it's made from glass, all you need to do is: Place it in a small baggie with isopropyl alcohol Let it soak for 10 minutes Rinse under tap water—brand new clean! Unlike water pieces that require higher maintenance, this stem stays fresh with minimal effort. Why Choose the Arizer Evolution Stem? ✔ Next-generation cooling technology – Experience smoother, cooler vapour✔ Compatible with Arizer Solo & Air – Perfect for the Solo 3 and older models✔ No water needed – A powerful middle ground between default stems and water filtration✔ Three unique versions – Choose the perfect airflow and cooling level✔ Effortless cleaning – Quick soak in ISO alcohol brings it back to new If you’re looking for the best dry cooling stem for Arizer vapes, the Arizer Evolution Stem is a must-have upgrade.

Read more less

The High Rise Water Pipe System is a Huge Step Up We’re movin’ on up, to the green side, in the sneakiest apartment in the sky-ighhh. From the innovative original creators of the Globe and Cube series, we’re here to ask if you’re ready to move up even higher in the haze to a skyscraper? If so, the incredibly high performing and pioneering High Rise Water Pipe System is ready for occupation. An Impressive Water Pipe Holds Lots or a Little Made from several components, the meat of the High Rise System starts with the water pipe, and it’s a considerable unit. With a wide base and massive reservoir, you’ll be able to fill it with enough water to cool down the hottest hits while being stable on the table. The High Rise features a high volume, ultra-bubbling, wide diameter percolator that both sits close to the bottom of the piece and is bolstered to it for additional strength. This low position lets you fill the water pipe with a small amount of water and still get some cooling which can be advantageous and provide the best flavour. Whip it Good and Share with Your Friends The glass piece has a 14mm input that is bolstered to the side of the unit for extra strength and on the top, you’ll find a second 14mm joint which is purposed for the included silicone whip. The High Rise is a true desktop centrepiece that you’ll want to share and show off as well. Staying in the vein of being impressed by the High Rise, the glass is the least interesting part! Where the real magic happens is in the “scaffolding”, the non-glass components that surround the High Rise and provide it with the unique abilities that it brings to the party. The bottom section of the scaffolding is a precision, 3D printed base with a small rubber pad in the centre where the glass sits. A Sturdy Scaffolding Protects the Glass There are 4 metal posts that screw into the base and will then secure the top metal section that sits directly on the glass in place. Once again, there’s a rubber pad where the glass would contact the other surface for peace of mind and safety. Now that the High Rise is assembled, you will see how substantial of a structure it really is, with enough mass to stand reliably regardless of what device you’re using it with. Finally, for those of us who are always misplacing our tools, the High Rise has a built-in swing arm that is pitted with different sized holes to support your extra bowls, adapters, and tools of various sizes. Light it Up While You Get Lit Up But what’s that? Off the top rope (or under the base) with the coupe de grace there’s a controllable, colour changing LED light disc that will light up your High Rise in a multitude of colours. You can choose to have one colour displayed, or the light can cycle through the available colours in order, it’s totally up to you! Battery shipping laws are weird, so the included remote comes with the battery installed, but the light is powered by 3 x AAA batteries that you’ll have to supply on your own. The High Rise is a special piece that brings both an impressive water pipe, a securely fastened protective cage, a tool organizer and a light show. We’re talking about high-end features in an extremely affordably priced rig that provide a significant step up from using a standard glass piece. Find out even more about the High Rise here.

Read more less

Increase The Airflow in Your Solo 3 Get more airflow out of your vaping sessions with the High Airflow Stem for Arizer Solo 3. Specifically designed to optimize your Arizer Solo 3, this stem ensures you get the most out of every draw. Compatibility Across Models Not just limited to the Arizer Solo 3, this versatile stem is also compatible with a range of other Arizer models, including the Solo 2, Solo 2 MAX, Arizer Air, and Air MAX. Enjoy enhanced performance across your favourite devices. Two Convenient Sizes Choose the size that suits your needs with our standard-sized version or the new XL version. Both options are designed to work perfectly with your device, providing flexibility and convenience no matter what sort of session you have in mind. Improved Airflow Design Say goodbye to restricted draws. The High Airflow Stem replaces the traditional glass screen with a removable and replaceable metal screen. This innovative change significantly boosts airflow, allowing for less restricted draws.

Read more less

The Hula Stem V2 XL works with a stainless steel or titanium DynaVap tip to add cooling and the purity of glass to your DynaVap experience. Simply place any DynaVap tip onto the Hula Stem XL and heat like normal. The Stem will help to cool down your vapor with its indentations that add surface area to the vapor pathway. By replacing your current DynaVap body with a glass Hula Stem V2 XL, you are creating an incredibly pure vapor path, many people prefer glass compared to even the higher-end metals like titanium. ** DynaVap Tip NOT included. Key Features:  - Indentations add surface area and help to cool vapor- Enhanced tighter fit- Add the purity of glass to the DynaVap- 3" total length- Available in seven different colour options

Read more less

An essential pick-up for any owner of a Healthy Rips Rogue or Edge, the BubbleMax adds ample water cooling to either device. Standing 5 1/2” from tip to tip, when filled with roughly an inch of water, you'll notice a night and day difference in vapour smoothness compared to using the device dry. Fitting into the accessory mount easily and securely on either device, the BubbleMax also works with dosing capsules to keep things clean and organized. The substantial water cooling this device brings to the yard will reduce the throat burn and hotness normally caused by dry hits of even the hottest sessions. This must-have addition has a comfortably angled mouthpiece which give you a little space from the device and increases overall ergonomics. The BubbleMax sits above the ground, keeping the glass off the floor for added safety. If you own a Healthy Rips Rogue or Edge, this is a no-brainer. Add considerable water cooling to your Healthy Rips devices with the BubbleMax.

Read more less

Add Convenience To The Tinymight 2 If you’ve been following us for a while, you’ll be well aware of how much we love Dosing Capsules in general, and if you haven’t, this is a great opportunity to learn why they’re so popular with vaporizer enthusiasts. Simply, Dosing Capsules are a great way to add a little proactivity to your sessions by enabling easy, clean reloading and the Tinymight 2 Dosing Capsules will satisfy those needs for everyone’s favourite portable vaporizer. Dosing Capsules are the most convenient way to add flower directly to the stem of your Tinymight 2. The amount is measured, the activity repeatable and the results are consistent. Using Dosing Capsules instead of filling your stem directly is not only quicker, but also cleaner and will result in less day-to-day maintenance for your device.  Preload A Full Day Of Vaping The peak of convenient power is to head out with a few Dosing Capsules and a Tinymight 2. The device is super-efficient and it’s almost blasphemous not to capitalize on that by saving time with your packing as well by taking only seconds to preload an entire day’s worth of sessions and bringing them with you. After you’ve extracted all the active material from that Capsule’s cargo, swap it out with a fresh one! It literally takes seconds, causes no mess and is good to go.  Less Maintenance & Faster Reload The Tinymight 2 Dosing Capsules are the size of the bowl of the device, so they’ll fit in your favourite stem as long as it’s standard sized. Made from a two-piece metal construction, the lid and body of the Capsule are pressure fit and will hold the preloaded capsule securely. What was a pleasant surprise was how similar the draw was when comparing using the Tinymight 2 natively to using it with a Dosing Capsule, so you shouldn’t see any loss in your ability to create the massive clouds the device is known for. The Tinymight 2 Dosing Capsules are available in packs of 1 or a Tube of 5 and are the perfect complement to this great portable vaporizer. Repeatable results, big clouds, nice and clean… almost why you bought a Tinymight 2 in the first place :P

Read more less

I love almost everything about my Vestratto Anvil. Almost. Removing the Chamber while it’s hot can be a pain, literally. The new and affordable Magnet Ring for Anvil solves this problem permanently with an innovative, whimsical design. The Magnet Ring is a literal ring you can wear on your upper finger made from durable metal that has a strong magnet mounted on the business side that allows you to safely and effectively remove your Anvil Chamber, even while hot.  A practical product with a touch of fun, the Magnet Ring for Anvil is your ticket to maximum on-the-go functionality. Maybe don’t use it to propose though.

Read more less

A Brilliant Successor To The CCELL Palm While the Palm Pro is only the first sequel to the Palm, this feels like jumping from an NES to a PS5. While the CCELL Palm was the true industry standard in 510 batteries for years, the features added to the Pro leave it in the dust, bringing you the most sophisticated yet simple cartridge device you’re about to add to your arsenal. Simple, Yet Incredibly Powerful The Palm’s greatness was in its simplicity and the Pro loses none of that but it’s no longer basic, and that’s an important distinction. The elevated simplicity of the Palm Pro shines through in each feature that was added. Working with the majority of 510 cartridges on the market, the Palm Pro uses drop in magnetic adapters for a nice tight, secure fit that’s easy to swap and change out. 500mAh Battery & USB-C Charging A small and extraordinarily pocketable device, the inhale activated Palm Pro will turn on and heat up by inhaling on a cartridge, no need for any button presses. The massive 500mAh battery will probably outlast your cartridge on a full charge and when you do need to charge, it’s done quickly through USB-C. New Pre-Heat Function Comes In Handy While not necessary for usage, the newly added single button and display add a tonne of utility to the Pro. If you press the button once, it’ll show you the charge left in the battery (in 33% increments) and double clicking the button will activate the preheating function that can be used to deal with sticky distillate or a clogged cartridge. Variable Voltage & Adjustable Airflow As far as production, the Palm Pro really ups CCELL’s game. You can now choose between three variable voltages to affect the oil vaporization at different intensities and you can now also fully adjust the airflow between all the way open or closed to create a bespoke situation of both quantity, thickness, and temperature of vapour where your intensity and airflow are dialled in for you, by you. CCELL Is An Industry Leader In 510 CCELL has been doing this a long time and if you’re a regular user of their products, well the rich are about to get richer. And if you haven’t used a hobbyist style battery for your 510 cartridges and are used to relying on the cheap, disposable batteries, do yourself a favour - your lungs will thank you.

Read more less