All Products

Glass Adapter For The Venty Vaporizer Intensify your vaping experience with our 3-in-1 or 14mm glass water pipe adapter designed for the Venty vaporizer. By integrating a water pipe into your vape setup, you'll experience cooler vapour and smoother, fuller hits. This versatile adapter fits snugly into 10mm, 14mm, and 18mm female water pieces - or comes as a 14mm only option - ensuring compatibility across different setups. Easy To Install & Remove Installation is a breeze: remove the cooling unit from your vaporizer, align the slots on the adapter with the device's slots, and gently twist to secure it in place. Be sure not to over tighten, partial turn is all that is required to secure it in place. Once attached, connect your Venty to the water pipe of your choice and savour the smooth, water-enhanced hits. Venty users seeking an enhanced vaping experience will find this adapter indispensable after some time with it. 2 Piece Design Keeps It Easy To Clean Crafted with a durable plastic housing that surrounds borosilicate glass for a pure vapour path, our adapter also comes with a replaceable screen for added convenience. The Venty 3-In-1 Glass Adapter is NOT compatible with Dosing Capsules. The Venty 14mm Glass Adapter IS compatible with Dosing Capsules.

Read more less

Rise Up and Cool Down with the Arizer Bead Stem Many of our favourite devices come equipped by default with a relatively short output that does very little to substantially impact the cooling of the vapour that’s created, resulting in unwanted coughs and unnecessary sore throats. Ideally, you’re going to want to run your rig through water for the best cooling, but if you’re out and about, that’s rarely an option. The Arizer Bead Stem is an incredibly effective cooling stem that will work with several of the most popular and powerful devices available. Let’s dig into what makes the Arizer Bead Stem so great. Familiar Technology Executes Impressively for Better Cooling By now, most of us are familiar with ball vapes, but for those who aren’t, essentially your flower is vaporized by a wand that’s head is full of quartz balls heated by an electric coil. With the Arizer Bead Stem, we went in the exact opposite direction; the quartz beads in the stem act to pull heat from your vapour to provide a more enjoyable session. These balls are on the larger side and are effective at drawing a tonne of heat out of your vapour while providing less airflow restriction than the smaller balls you’ll find in other stems. A Lateral Evolution of the Rocket Stem Speaking of the Rocket Stem, the Bead Stem has a thinner profile making it easier to take on the go. You can also remove the beads in the Bead Stem, making it even easier to clean than the Rocket Stem. The Bead Stem has a two-piece glass section, one section that holds the quartz balls in place and the second part that connects to the stem through a gasket connection. This choice for a two-piece construction allows for the easiest maintenance and maximum airflow possible. Effective, Compacted and Ready to Take with You The Arizer Bead Stem attaches to your device directly and includes a built-in permanent glass screen for easier maintenance. The Arizer Bead Stem works with the Solo 3, Solo 2, Solo 2 MAX, Air MAX, Air SE, and is a highly efficient, compact stem that will definitely outperform the standard dry stem that your device was shipped with.

Read more less

You Needed it, We Did It The poet laureate of Canada, Avril Lavigne, once pined, “why you gonna make things so complicated?” Well, keeping it simple is great and it has its place, and we visit that place often, but sometimes you just want to amp it up. Gear upon gear upon gear. Hell, we make a four-man water piece, you know we like to bring it now and then. Take the leap with us into the absolutely unique Pass-Through Micro Bubbler. A Bong for Your Bong The ingenuity of the PTMB starts with a 14mm intake that feeds into a micro bubbler from your main glass piece’s intake. Then attached to the side of the micro bubbler, there is another 10mm joint and there’s a matching glass stopper you can utilize with that joint like you would with any carb, but it will serve the function of not just emptying the micro bubbler, but your glass piece as well. Measure Twice, Buy Once While this is an incredible system, it will not work with all shapes and sizes, so make sure that your piece will fit before you go down that road. Or buy another piece that will fit, we’re not here to tell you what to do. Also, make sure the piece you’re connecting it to has some heft, as this PTMB has some weight to it as well and you don’t want the castle to come crumbling down. Double the Fun The Pass-Through Micro Bubbler is like putting another gun on your gun, a knife on your knife, a guitar on your guitar; you might think twice, but you’ll be glad that you did it. You’ll definitely look as cool as Jimmy Page while using the PTMB, that we can guarantee. Use it as a carb, extra hydration or just to look cool, just use it.

Read more less

Behold the DynaVap M7 XL Colours – Fall Edition Introducing the new limited-run DynaVap M7 XL Colours – a seasonal release featuring two stunning new variations: Obsidium and Rosium. When these exclusive Fall Colour versions are gone, they're gone for good. The Obsidium edition showcases a sleek, dark aesthetic inspired by the natural beauty of volcanic lava cooling to form obsidian. The torch flame reveals smoky black tones with hints of amber, making this M7 XL not only a visual masterpiece but also a durable device that’s built to last. The Rosium version offers a unique, ever-changing colour experience. It features vibrant hues of purple, pink, and gold, which shift and evolve over time with use. No two Rosium M7 XLs are alike, adding a personalized touch to each device while maintaining the exceptional performance DynaVap is known for. Bigger is Better with the DynaVap M7 XL The DynaVap M7 XL takes the beloved M7 design and expands it, offering a longer stem for enhanced cooling and a more comfortable experience. The XL’s tapered mouthpiece fits natively into a 10mm water piece, and the zigzag airport adds a unique visual and functional flair. Redesigned Tip for Superior Hits The M7 XL features a completely redesigned tip with a Septa Serrated Crown, allowing you to grind flower directly from the bud. The updated thermal mass under the oven delivers larger hits while transferring less heat into the stem, satisfying even the most demanding users. Adjustable Airflow with Precision Design The M7 XL’s condenser offers built-in adjustable airflow, which locks in place with a simple click. The device also boasts an o-ring free condenser for a smoother, more reliable experience. A Sophisticated Look with High Performance With its sleek and understated design, the DynaVap M7 XL is perfect for both personal and professional environments. Combining luxury aesthetics with world-class functionality, the M7 XL outshines previous iterations while coming in at a surprisingly accessible price point.

Read more less

Keep it clean, keep it wipey! Your glass items, vapes, and accessories will shine with Great White Wipes. Our individually wrapped wipes are made with 99% isopropyl alcohol, made of sturdy material to give them the strength to handle the toughest jobs. There's no scent or additives, and the purity of the alcohol means the Great White Wipes will leave your vaporizers clean and hygienic, with no residue left behind. Each wipe measures an expansive 20cm x 15cm, so there's no fussing with undersized wipes. Whether sharing a puff with a friend, or just doing some regular vape maintenance, these wipes will ensure fresh clean hits. Our wipes come in a bargain sized pack of 50 individually packaged wipes. Wipe out grime and germs, and make your vapes pristine, with Great White Wipes.

Read more less

Replace Your Screwball/Pinch Hitter/Ace Bowl Screens The Screwball Bowl Screens are OEM replacements, designed for the original screens included in your kit. Crafted from high-quality stainless steel, they come in two sizes: 15mm for the micro bowl and 20mm for the full-size bowl, ensuring the perfect fit for your needs. Replacing your screens regularly is essential for maintaining proper airflow and maximizing performance. These screens are affordable, easy to swap out, and ensure your device continues to deliver consistent results. With quick and simple installation, you can keep your bowl functioning at its best in no time.

Read more less

Enhance your Anvil experience You know, we’ve come a long way. I once made a pipe out of a toothpaste box, cigarette tinfoil and electrician’s tape and today, thankfully, we’re blessed with high-tech, well-engineered devices that do everything but work our lungs for us. Take the Vestratto Anvil (if you can find one). The device is a marvel of engineering and that’s even apparent in the bowl. The Vestratto Anvil Bowl is an OEM addition that adds the option of bowl size to your Anvil experience.   Floating Design For Heat Isolation While the Anvil doesn’t look overly engineered, the genius lies beyond sight. The bowl consists of multiple components that are seamlessly combined to float perfectly within the CopperCore Oven, and this helps the bowl stay isolated from the heat until you start inhaling.  Calibrated Heat Indicating Discs The Anvil Bowl is easy to remove and reassemble, using only a few threads to twist off and on. The Bowls are magnetic and work perfectly with our Anvil Magnetic Ring. The bowl contains heat indicating discs and coupled with their perfect calibration, they give the Anvil its easily repeatable results that promise a perfect roast every time. 3 Size Options The Anvil Bowl is made in 3 different sizes: Half Bowl, Full Bowl, and XL for the heavy hitters. We really love the 0.05g Half Bowl but can totally understand the use cases for the 0.1g Full Bowl or the behemoth of a 0.2g XL. As this is a convection-based vaporizer that rewards airflow, you’ll want to refrain from over-packing as it will only act as a detriment to your enjoyability.   Choose Your Estratto Estratto refers to the level of roast you’re getting out of your oven, and if that’s not predictable, it’s a pain. The Anvil Bowl is a convection solution in three available sizes that makes the repetition of your results incredibly easy.

Read more less

Junior Replacement - Replacement bent mouthpiece for the Junior. Made from heavy wall Simax glass. Runt Replacement - Replacement long bent mouthpiece for the Runt.  Made from heavy wall Simax glass, will work with the Sticky Brick Junior as well. OG Replacement - Simax glass replacement mouthpiece for The OG Brick.

Read more less

Ooooh, doggie, look what he's cooked up this time! Ed always has his finger on the pulse, and with the rise in popularity of injector style vaporizer systems we knew it wouldn’t be long before he dropped some new injector gear. Sure enough, the Ed’s TNT Injector Bowl has arrived and it's everything we hoped for.  The Ed’s TNT Injector Bowl will work with some of the most popular injector systems, including Cannabis Hardware, Old Head Trading Co, Elev8r, Herborizer, and many more. The 18mm female input allows for any of these styles of vaporizers to fit perfectly. It's available with either a 14mm or 18mm output, opening up many options for compatible water pipes or other cooling solutions. Crafted to perfection from beautiful cocobolo wood, each Injector Bowl is beautifully unique, no two are alike. Exquisitely made to high quality standards, you won’t have to worry about breaking it either. Because wood is a great insulator, the heat will be focused where it should be, on your flower, not heating up the bowl or air beyond it. This is the second iteration of Ed’s TNT Injector Bowl, and the fine mesh screen is now set at a 5/8” depth for better performance and includes a recessed bottom for increased airflow. Extra screens are included as well, so you’ll be set for quite a while.  Innovation brings out the best in creators, and Ed being the best of creators, brings us the best after-market goods. Ed’s TNT Injector Bowl is the perfect upgrade for anyone using a compatible injector system, if you want to improve your flavour and vapour output, you’ll want to add one to your set-up.

Read more less

The Super Sub Pipe: More Capable than Most Navies Interesting bit of Canadian history: at one point in the late 80s, the West Edmonton Mall, at the time the largest mall in the world, had more nuclear submarines than the entire Canadian Navy. We may not have as many submarine themed devices as an entire country, even Canada, but we are happy to add another one to our fleet, the Super Sub Pipe. This cavernous water piece will have you exploring the depths of your couch with a pipe that is designed to make the chamber easy to empty without removing your vaporizer. A Built in Pass-Through You Say? Think of the Super Sub as a reworked, restructured version of our Submarine Pipe with one game changing addition: an additional, multipurpose joint. Essentially, the primary use for this joint is as a built-in, pass-through for your water pipe. This makes the chamber easy to empty and as it’s huge, you’ll be able to fill the Super Sub all the way to capacity with vapour and enjoy it all in one toke. Leave Your Vape in for the Entire Session With this built-in ability to clear the chamber, you do not need to remove your vaporizer during your session. We’ve prioritized the business end of the experience, but the operational elements of the pipe are just exceptional. Just drop your vape into the 14mm joint for the entirety of your session and use the included glass plug as a shotgun to exercise your lungs. This is both safer and easier than having to remove your vape each time you want to empty your piece, and everyone loves that. Stable, Large and an Impressive Cooler The Super Sub measures 5.5 inches long and 3.75 inches tall, with a stable base and a large tubular section that’s capable of handling the largest tokes. Its horizontal layout supports a large surface area that helps to efficiently cool and filter the vapour. The 14mm intake joint leads to a low horizontal slit percolator, allowing for varied water volumes. The other end of the piece features another 14mm joint compatible with the included whip, perfect for sharing sessions comfortably. Four glass feet stabilize the Super Sub, helping keep any mess off your surfaces and making it easy to maintain. Its horizontal design flow and whip let you hold your face away from hot vapour, offering a truly comfortable experience for all water pipe enjoyers. The Super Sub Pipe is enough of an upgrade that even owners of the original should take a look. The ability to empty your load with a glass stopper instead of fiddling with getting your hot vape out of a 14mm is the dream. The Super Sub Pipe is a well-rounded water pipe that shines in every aspect.

Read more less

Introducing the Incredible VENTY from Storz & Bickel It’s been a hot minute since we saw a brand-new product from Storz & Bickel and this special offering is worth the wait. As the company in the industry with the longest and most impressive track record when it comes to vaporizers, and with the biggest R&D budget to match, we expect significance from the masters, and we got it with the VENTY. Let’s talk about it! Super-Powered with Free Airflow Meet the VENTY, the most powerful portable that Storz & Bickel has ever produced. The VENTY heats up from cold to vaporizing temp in only 20 seconds, the fastest we’ve seen from a S&B device. For reference, the Mighty+ takes 3x as long to heat up, at 60 seconds. While many vaporizers suffer from the “milkshake effect”, where the airflow can’t cut through the material cleanly and you struggle to pull a hit, Storz & Bickel are renown for the free airflow on their devices, allowing you to breathe in easily and be satisfied. The VENTY has the best airflow that they’ve ever offered, achieving up to 20L per minute, and is adjustable through a dial on the device. The ability to adjust airflow to your liking is a feature that goes way past “oh that’s neat” to “how have I been living my life without this?” and to show their dedication to the aspect, S&B included a flowmeter in the device that senses how emphatically you’re drawing on it and dynamically adjusts the heater in real time to compensate. Essentially, you’re getting the same draw at the desired temperature regardless of how you have your airflow set. Game Changing New Heater Design The VENTY has a newly designed heater to produce bigger clouds than ever and as far as we can tell, it’s among or maybe even the most powerful portable on the market with a maximum power usage of 130W @ 16 Amps, a substantial difference compared to 40W on the Mighty+. More power = bigger clouds, the math checks out and due to the design changes, they’re cooler and tastier than ever. The VENTY provides single degree temperature control directly on the device with a large, multi-coloured screen that’s easy to read and a vibration motor that will let you know when the device is ready to go. Chase Cool Clouds with Two-Stage Cooling When you’re hitting those big clouds, you’ll want them to be cool and of course Storz & Bickel accommodated for this with the new two-stage cooling unit on the VENTY. The innovative cooling system has two levels to elongate the vapour path and it is double walled so that the exterior remains cool to the touch. The VENTY utilizes an additional screen in the path itself to provide the most pristine vapour available on a portable. A Power Supply as Impressive as its Engine With an engine like this, you need to bring the power supply to match, and of course, the VENTY does not disappoint here. Equipped with USB-C charging that features the “supercharger” function that will provide an 80% charge in only 40 minutes if you’re using an appropriate charger. This SOB is packing two 18650 li-ion batteries that both power the beast and will last for many sessions between charges. Optional Bluetooth For More Customization The VENTY also has the capability for Bluetooth connections, but they are completely optional. If you do enjoy extra levels of customization, connect to their free web app and control things like vibration, pre-set Booster temperatures, Eco-Charge mode and more, including over the air software updates. It’s always nice when a device with great analogue parts has software that lets you make them even better, and we all know Storz & Bickel only releases the best. Along those lines, the VENTY is made to the same rigorous standards as their medically certified devices and uses only the highest quality materials that are known for their safety and purity. In fact, the VENTY is approved using UL (8139) and IEC 60335-1 certification, which is welcome to see and provides confidence in the device. The VENTY is Worth the Wait We had to wait a few years since there’s been a brand-new offering from Storz & Bickel, and the VENTY is well worth the wait. This extraordinarily impressive handheld vaporizer is exceptional in every way, from airflow to power to cooling to battery, and that’s really not something we can say very often. See our full review of the Storz & Bickel Venty here.

Read more less

Serious Cooling In A Dry Stem Healthy Rips vaporizers have incredible portable power and while water is not always available when you’re on the road, a cooling solution is a necessity. The XL Rocket Stem for Fury Edge/Rogue SE is compatible with the Rogue, Rogue SE, Fury Edge, and Fury Edge SE and is a fun but serious piece of glass that’ll cool down your hits. Tons Of Glass Beads To Cool It Down The Rocket Stem has a unique design that succeeds in providing substantial amounts of cooling in a more compact design. The glass beads also helps to catch any small bits of flower before they can reach your mouth. Instead of hot vapour travelling from the oven directly through a stem and into your mouth, it’ll first pass through the slit screen and into the XL Rocket Stem where it’ll undergo the cooling process. Tri-Coloured Bead Design The XL Rocket Stem features a bunch of red, green, and dark blue beads that disrupt the direct vapour path to help cool things down substantially. That mass of glass beads themselves will also absorb a bunch of heat along the way which will also chill things down before the cloud hits your lips. The beads look super cool and they’re held in place by glass pinches before the mouthpiece.

Read more less

DynaVap HyperDyn: The Ultimate "Big Bowl" Vaporizer A New Experience with State-of-the-Art Design The HyperDyn is DynaVap’s first “Big Bowl” vaporizer, offering a completely new experience with its state-of-the-art tip and cap combination. Featuring a larger chamber volume (average of 0.25g), the HyperDyn is constructed with medical-grade titanium, colored and protected by DynaVap’s advanced DuraDyn coating technology. This innovative device boasts a 10mm and 14mm taper, accommodating water piece use, and remains modular with previous DynaVap midsections, tips, and mouthpieces. Who is the HyperDyn For? Connoisseurs looking for a larger “session style” DynaVap vaping experience, and those yearning for a DynaVap with a bigger bowl. Benefits Massive Rips & Heavy Hits Push thermal extractions to the limit with the HyperDyn's larger chamber. Durability Crafted from high-quality, medical-grade titanium and built to last a lifetime. Fully machined and crafted in Wisconsin, USA. Everything is titanium except for the o-rings and thermostat. Flavour Explosion Experience terpenes like never before with enhanced flavour from your dry herb and/or concentrate. Prolong Your Session Enjoy longer sessions with the larger capacity chamber, reducing the frequency of reloads. Eliminate Combustion Enter a smoke-free world of enjoyment with the HyperDyn, leaving combustion behind for good. Discreet, Portable, & Modular Designed to fit in your pocket and be enjoyed during any activity. Modular with previous DynaVap components. Battery-Free No need for batteries. Just use a torch lighter or induction heater, and you’re ready to go. HyperDyn Features - Massive Rips: Enjoy bigger hits with the larger tip chamber/bowl volume, approximately 2.5x the original chamber size. - Extended Sessions: Prolong your vaping session with a larger capacity bowl that extends time between reloads. - Scratch Resistant: Clean, scratch-resistant look from DynaVap’s DuraDyn coating technology. - Durable Build: Hardened titanium guarantees a long-lasting device. - Optimal Bong Fitment: Built-in 10mm and 14mm tapers for use with water pieces. - Modular Compatibility: Compatible with all previous DynaVap midsections, tips, and mouthpieces. (Note: The Hyper Cap only fits the Hyper Tip.) - Ergonomic Design: Ergonomically designed stem enables easy Airport usage. - Precision Machined Cap: Titanium Cap that connects to the Hyper Tip without threads, consistent look and function with DynaVap’s Captive Cap technology. - Adjustable Airflow: Airflow is adjustable via the connection between the Hyper Tip and Hyper Cap. Tailor your draw to your preference. - Seven Unique Airflow Settings: Adjustable Airflow Control from seven settings controlled by the condenser depth within the mouthpiece. - Optimal Temperature Control: Hyper Cap engineered to “click” when heated to the optimal vaporization temperature, ensuring an exceptional session. How to Use 1. Remove the Cap 2. Load Your Dry Herb into the Tip chamber/bowl. 3. Place the Cap Back on the Tip 4. Heat the Cap with a Torch or Induction Heater until it Clicks. 5. Inhale from the mouthpiece end. 6. The Cap will click again when it has cooled down. HyperDyn Parts - DynaVap’s Hyper Cap - Titanium Tip: Hyper - Titanium CCD (Screen) - High Temp O-Rings (2) - Titanium Condenser Assembly with Mouthpiece: Hyper - High Temp O-Rings (2) - Titanium Stem: HyperDyn - DynaStash XL: Wenge - Hyper Dosing Capsule Experience the new standard in vaporization with the DynaVap HyperDyn.

Read more less

Behold The Starship - Universal Beaded Stem Say goodbye to the hassle of searching for specific Sneaky Pete Rocket Stems for your vaporizer. The Starship is here to revolutionize your vaping experience with its universal beaded stem, designed to fit any 14mm male water pipe adapter. Universal Compatibility Our Rocket Stems have garnered huge popularity, but the need for different ones for each vaporizer isn’t ideal. The Starship eliminates this hassle by offering a universal solution that fits any 14mm adapter, ensuring compatibility across various devices. Advanced Filtration Filled with an array of small, multicoloured glass beads, The Starship acts as a superior filtration system. These beads effectively sift out large particulate matter before it reaches your mouth, providing a smoother and cleaner vaping experience, and less Scooby Snacks along the way. Enhanced Cooling Experience a significant cooling effect on your vapour with The Starship. As the vapour travels through the beads, they efficiently absorb heat along the way, preventing you from inhaling that heat. The result? A noticeably cooler and more enjoyable vaping session. Substantial Design and Function Crafted to be more than just a functional accessory, The Starship is a substantial piece that can replace a small water pipe. Its robust build ensures durability while providing substantial cooling to any number of vapes you throw at it. Full Flavour Preservation Unlike traditional water pipes, The Starship offers substantial cooling without sacrificing flavour to any degree. By bypassing water filtration, it retains the full flavour profile of your vapour, which is appreciated by the true aficionado. Compact and Convenient Standing just over 6” tall and featuring an unfrosted 14mm female joint, The Starship offers a compact and convenient solution for your next session. Upgrade your vaping experience with The Starship - compatibility and cooling taken to new heights. See our full video review on The Starship here.

Read more less

The VENTY Case Keeps Your Vape Safe If you’re anything like us, you do carry your vaporizers on the go, especially portable ones. Unfortunately, things happen; you trip, or someone bumps you and your costly vaporizer now has scuffs and potential breakage. In the case of the VENTY, Storz & Bickel make a great…case to help you avoid any bruises while you’re in the wild. Odour Free and Fits Accessories  This hard case is odour proof and sized perfectly to keep your VENTY safe and sound. With the perfect space for your VENTY to rest, you’ll have it with you at all times. Protect your beloved vaporizer with the VENTY Case.

Read more less

After the success of the Long Handled Dab Tool we are honoured to bring you another handcrafted piece from Ed’s TNT in the SPV Artisan Series - the Pack & Stir Tool. Ed is the master and commander of custom wood vaporizer accessories and his craftsmanship is unparalleled. This time, we’ve commissioned him to make us a jack-of-all-trades custom tool, designed to be used in every part of the vaporizer process. The Pack & Stir Tool measures in at 4.5” overall length, with a 1” stainless steel stir tool on one side and a 0.25” brass, ferruled tamp tool on the other end. The tamping end is designed to fit into even the smallest vapes to pack it just right and works in a DynaVap or Ed’s own WoodScents. The tool's handle has a flat section to prevent rolling, while also keeping the dirty parts elevated from your table, helping to prevent mess. Available in two lovely wood grains, the Pack & Stir Tool is a work of art. The Granadillo wood, which has been used by Ed for a decade, mostly in Arizer stems, is native to Guatemala, and features rich dark tones varying to bring orange heartwood. The Canarywood originates in South America and is typically yellow with irregular characteristics, this batch has vivid red and orange streaking that is strikingly similar to fire ripping through the wood. Ed is really excited to be using these woods to create a great stirring, cleaning and bowl emptying tool that we know you’ll love. Treat yourself to a versatile masterpiece, Ed’s TNT Pack & Stir Tool from the SPV Artisan Series.

Read more less

Sneaky Pete Pass-Through Injector Bowl The Sneaky Pete Pass-Through Injector Bowl is an 18mm female bowl designed to work with most injector vaporizers, including the Terp Hammer, Freight Train, B-Zero, and many more. Secure and Replaceable Metal Screen Featuring a 20mm metal screen, this bowl offers superior airflow for the biggest and smoothest hits. The screen stays securely in place, allowing you to stir your bowl without hassle. Additionally, it's removable and replaceable, so you can easily pop in a new one whenever needed. Universal Connection The Sneaky Pete Pass-Through Injector Bowl terminates in a 14mm male connection, making it compatible with the most popular water pieces. This ensures you can use it with your favourite setups without any compatibility issues. Innovative Pass-Through Design The standout feature of this bowl is its pass-through connection. This design allows you to easily clear your water pipe without needing to remove your vaporizer. This not only simplifies the process but also reduces the risk of breakage, as you can leave everything assembled and just remove the glass stopper to clear your pipe. Superior Airflow for Optimal Hits We chose a metal screen to provide superior airflow, allowing you to take the biggest and smoothest hits possible with minimal draw restriction. While glass screens have their own advantages, the metal screen in the Sneaky Pete Pass-Through Injector Bowl is specifically designed for maximum performance.

Read more less

We’re happy to bring you another beautiful piece from master craftsman Ed of Ed’s TNT, the Wooden Tinymight WPA. These wonderful works of art pair with your Tinymight to bring you a marvelous execution of a simple idea.  Made from beautiful cocobolo wood, this multi sized water pipe adapter (WPA) will work with 14mm and 18mm female joints. When using this adapter, you can skip the cooling unit in your stock stem as you will be taking advantage of water cooling. Simply place your flower in the conical screen (two included) and you’re all set. The fit and finish on these adapters is immaculate; you’re getting a truly beautiful and unique piece of art. Utilize the cooling power of water with your Tinymight by adding Ed’s TNT Wooden Tinymight WPA.

Read more less

The Donut Pipe Brings Considerable Cooling to Your 14mm Vaporizers Stoners like to show off their gear, especially the high-volume rigs that tend to come out more often when friends are over. You might not know this, but cannabis aficionados can often be quite clumsy, often because of enjoying the aforementioned rig. We love stable rigs with the capacity for a large volume of water, and the Donut Pipe hits the nail on the head. As the wise Homer Simpson said, “Mumm… donuts.” Yes, Homer, ‘mmm, donuts’ indeed. Shaped Like a Donut, Bubbles Like a Pipe Like its namesake, the Donut Pipe is round with a flat base. We focused on a few specific things with this design to ensure that not only did it fit a niche market, but it would also be pretty much anyone’s ideal first water piece. With a 14mm female intake joint that leads into our famous disc percolator, you can drop pretty much any vape that’s native to 14mm or has an adapter and see thousands of bubbles cool down your vapour. Just Add Water for Stability The construction of this piece has a focus on stability. With a capacity for a substantial amount of water, a low centre of gravity, and a whip mouthpiece for tabletop usage, this may be the shortest water piece that we’ve produced without sacrificing stability, water reservoir size or compatibility.  Great With Ball Vapes and More Our favourite way to use the Donut Pipe is with a ball vape and friends. The large amount of water combined with the disc percolator cool down those potent tokes and you won’t have to worry about instability because of the inherent size and weight and the whip is perfect for sharing. The Donut Pipe is also great for something like the Anvil; it’ll let you really milk up the water piece. There’s a Reason Everyone Loves Donuts From Federal Donuts in Philly to Cartems in Vancouver, this classic dessert is enjoyed by everyone. It’s a dependable snack that can easily punch above its weight. The Donut Pipe is an ideal solution for those looking for a water piece that is stable, holds a lot of water, a low-profile mouthpiece and the compatibility to work with most of your vaping arsenal. Find out more about the Donut Pipe here.

Read more less

Pobody’s Nerfect, not Even the VENTY We’ve used a lot of different cannabis related devices and what nots over the last decade, and even the absolute best pieces have “well I’d prefer if it…” factors about them, and this includes the VENTY from Storz & Bickel. While the VENTY is definitely one of the best vaporizers available, loading it can be slightly messy, but we’ve got you. From “Hard to Clean” to “Easy to Load” The VENTY Funnel is the perfect and wholly clean way to load your VENTY. The inherent design of the device leaves a “no man’s land” section between the bowl and the threads that becomes more difficult to clean the longer you leave it, and it’s not even easy after the first load. Installation is a Breeze Loading the VENTY requires the user to remove the cooling unit to load it regardless, so easily thread the Funnel on first and enjoy a superior, completely clean loading experience. Save Money, Vape Trees Unless you’ve got Saudi money, things are pretty tight for everyone right now, and you do not want to waste any of your valuable flower. The VENTY Funnel is an easy choice for those who plan on loading their VENTY often and want to do so without mess.

Read more less

Want to see an end game setup? Injector style vaporizers are here to stay, and the B-ZERO Injector Essentials Bundle is designed to not only get you in the game, but with a device you’ll both love to use and doesn’t break the bank. Instant, on demand vapour, substantial or flavour targeted hits, and ceaseless power with finesse, are you ready for it? The Injector arm of the B-ZERO is bored completely through and features two screen grooves that contain the ruby pearls where the heating coil contacts the body. I can’t emphasize this enough; you’re getting super-efficient heating and instant vapour with the B-ZERO. On top of that, the process is so simple and repeatable that you’ll be extracting like a master in just a few sessions. The B-ZERO doesn’t stop there, after all, it is an Essentials Bundle. Out of the box, you get everything that you need to get going minus your favourite 14mm water pipe and for the experience you can produce, the affordability is off the charts. The included Pass-Through Glass Bowl features an all-glass, screenless design to maintain the fidelity and purity of flavour. To top it off, the Insulated Heat Post is built into the PID controller, and functions as a practical and convenient stand to keep your Injector off the table and out of the way between uses. While the system can stay on for extended periods of time, for safety reasons you should never leave something turned on while unattended. The Cannabis Hardware B-ZERO Injector Essentials Bundle is a mean go getter that starts you off on the right foot, then keeps you going with the second. Cannabis Hardware are very respected in the space, and we can see why with this end game tier offering. This is truly a top-level system at an affordable rate.

Read more less

Healthy Rips Rogue 2 Vaporizer: High Performance, Great Value The Rogue 2 offers a perfect combination of power, convenience, and affordability for both beginner and advanced users. Built for those seeking top-tier vapour quality, extended battery life, and an excellent form factor, the Rogue 2 stands as one of the best-value vaporizers on the market.  More Power, Titanium Chamber, and Limited Edition Black Chrome Designed on the proven platform of Healthy Rips’ popular devices, the Rogue 2 integrates major upgrades for an even better experience. It features a 30% larger heating element, a titanium chamber for cleaner sessions, and a sleek limited-edition black chrome finish that combines durability with style. The larger 12mm chamber and 3000mAh battery mean longer sessions and fewer reloads, with rapid USB-C charging to get you back in action fast. Advanced Convection Heating Technology - Massive Vapour Output The Rogue 2's convection technology combines hot air convection with mild conduction heating, delivering powerful vapour from the first draw. This technology provides consistent, even extraction without needing to stir, making every session smooth and efficient. Whether you prefer short sips or deep draws, the Rogue 2 is engineered to handle it. Premium Build and Safety Features The Rogue 2 is crafted with an alloy unibody, an isolated glass air path, and food-grade stainless steel to ensure both safety and performance. The titanium chamber and stainless steel heating coil ensure lasting quality while maintaining safety standards (RoHS and CE certified). Key Features of the Rogue 2 - 30% Larger Heating Element for increased power - Titanium Chamber for pure flavour and durability - Advanced Convection Heating for consistent vapour - Low Draw Resistance and Haptic Feedback - OLED Digital Flip Screen and Precision Temperature Control (280°-430°F) - Fast USB-C Charging: Recharges in ~90 minutes for up to 100 minutes of use and use while charging What’s Included - Rogue 2 Device - Protective Travel Cover - Glass Cooling Stem and XL Glass Cooling Stem - Dosing Capsule - USB-C Charging Cord - Cleaning Tools and Accessories - 1 Year Warranty For anyone looking to upgrade to a capable, all-in-one vaporizer at an excellent price, the Rogue 2 is an outstanding choice. Discover the Healthy Rips Rogue—an ultra-powerful, pocket-sized vaporizer designed for unmatched performance and portability. Visit our blog for a detailed review and user guide to see why it’s the ultimate choice for on-the-go vaporization.

Read more less

The Crafty+/Mighty+ Mini Bubbler fits snugly on either device, and comes with a soft silicone base, or with a two-piece design depending on your preference. The bubbler delivers cooling hydration to your vape hits, while being small and discrete enough to take with you on-the-go, or keep out of sight at home. A screen on the bottom of the Mini Bubbler is designed to prevent flower from getting into the water piece, keeping the experience clean and pleasant. The Crafty+/Mighty+ Mini Bubbler is well built, and will elevate your vaping experience with cool, water-conditioned vapour. Works with the Crafty, Crafty+, Mighty, or Mighty+ by Storz & Bickel.

Read more less

The Ultimate DynaVap Wood Experience: The WoodWynd We really appreciate the amount of sheer skill it takes to work with wood at a cursory level, and growing up with a woodworking artisan, we saw some pretty fancy wooden creations in our life. Needless to say, we were blown away by the engineering, sophistication, and gorgeous aesthetic in the amazingingly functional new WoodWynd from DynaVap, their first new wooden vape since the VonG. Looking good is great but is definitely secondary to performance and the WoodWynd impresses there as well, with improvements and upgrades across the board. DynaVap spent years developing this magnificent product so let’s see what the hullaballoo is all about.  Sexy Shape Like a Cola Bottle from Tip to Helix Tip This sexy vape has a longer, sleeker profile than the VonG with an hourglass shape that sits naturally and comfortably in your hand or between your fingers. The wooden stem has a stainless-steel crown on either end and is finished with a matching titanium triple helix mouthpiece, condenser and Helix Titanium Tip. The entire device now only requires one size of o-ring for secure assembly. The wood and metal are married together in sections in a fashion that you’ll have to see to believe. Shockingly, the WoodWynd is half the weight of the M+ at only 10g. The WoodWynd Vaunts Improvements at Every Stage Looking at the engineering of the device, with the stainless crowns and titanium parts, you have a precise connection on both ends, a very high-end feel. DynaVap shows some innovation here as well, directly interfacing the condenser with the mouthpiece to create a modular system without any o-rings that we’re excited to start experimenting with. The WoodWynd features the aforementioned Helix Tip with its built-in airports, that will provide optimum air flow, as well as delivering an incredible Adjust-a-Bowl system that’s easier to use than ever. Big news: for the first time since 2017, DynaVap is introducing a new CCD! This new titanium CCD has more perforations than before, providing as much air flow as possible. Use With Water, No Adapter Needed Like its predecessor, the WoodWynd fits natively in a 10mm female joint with no adapter necessary. You can truly grip it and rip it, take advantage of that open air flow, and pump some thick clouds through water. The design is so intentional, that even the mouthpiece serves additional functions like CCD insertion to ensure you won’t need any additional tools to use or maintain this device. How often can you say that? The one size of o-rings continues this devotion to incredible design that even boasts mirrored triple helix designs on the tip and mouthpiece. What can we say, we really appreciate a good product. If you’re a cloud chaser or just a discerning vaper, you’ll appreciate all of what the WoodWynd brings to the table. We honestly can’t think of a use case this won’t satisfy and we are getting a tonne of use out of ours.

Read more less