It’s M7… DynaVap M7
For many, 7 is a lucky number. For DynaVap, the newest generation of their perennial portable is known as the M7, and they went back to the drawing board to bring new and old fans alike the most sophisticated, high-performance torch powered portable vaporizer on the market. The M7 is a battery free vaporizer that is incredibly efficient with the amount of flower needed to straight up blow your doors off; we were shocked at how little dry herb we needed to use to light us right up.
Elegant in its Simplicity
Through years of experimentation and listening to their supporters, DynaVap has found a way to balance complexity with simplicity and that’s never been truer than it is with the M7. The new device has a simpler, more understated look than the previous device, the M Plus, but it’s still got the interesting visual vibe that we expect from DynaVap. Though hard to describe and truly meant for the eyes, the pattern wrapped around the M7 is akin to an overlapping and interwoven metal design but will only be truly visible under a macro lens.
If you take a look at the device from a wider view, the look is akin to carbon fibre, but the surface is actually rugged metal, a finishing process that was developed in-house by DynaVap.
The Best DynaVap Tip Yet
Another new development for this device is the innovative M7 tip that boasts the sharp Septa Serrated Crown that allows you to grind flower directly from a bud into the bowl. This completely redesigned tip has a completely functional half bowl adjustment that works infinitely better than in their previous models. The thermal mass has been moved under the oven leading to 20% less heat being transferred into the stem. The increase in mass translates into larger hits and though it’s hard to comprehend, DynaVap tips just keep getting better satisfying even the heaviest of hitters.
You’ll Want to Put it in Your Mouth
DynaVap didn’t leave the rest of the device out of the redesign process. The new mouthpiece feels natural in your mouth, and it fits natively into a 10mm water piece. The new airport has a zigzag design that provides a more interesting air displacement while matching the overall aesthetic of the M7’s design.
The M7 fits together simply and snugly. The tip and condenser each only use two o-rings, meaning you need only four for the entire device, and with o-rings, less is always better. The precision of which the tip connects to the body is just so clean, you can barely believe it.
Instead of going for an over the top, complicated design, the DynaVap M7 is a sleek, sophisticated device that won’t look out of place on your desk at work. This is a luxury product that both looks and feels like it and the performance is otherworldly. The M7 outperforms DynaVap’s previous M line iterations and actually comes in less expensive than their last one. It is unreal to see a price drop on a design this much better than the last, but we're into it.
Arizer Solo 3 Vaporizer – Ultra-Powerful, Smooth, and Long-Lasting
The Arizer Solo 3 delivers massive vapour, ultra-fast heat-up, and all-day battery life in a sleek, durable design—perfect for serious vapers.
Massive Vapour, Maximum Power
The Arizer Solo 3 packs a punch with its high-powered convection/conduction hybrid heating. It delivers smooth, flavourful vapour with massive cloud potential.
Ultra-Fast Heat-Up & Precision Control
Reach your ideal temperature in just 5 seconds with full digital precision control. Dial in your perfect session with customizable settings and an intuitive OLED display.
All-Day Battery Life
The Solo 3’s incredible battery delivers up to 3 hours of runtime per charge, keeping you powered through extended sessions without interruption.
Durable, Portable, and USB-C Charging
Built from premium materials, the Solo 3 is rugged yet portable, featuring USB-C fast charging for quick top-ups and convenient use on the go.
Effortless Maintenance & Pure Flavour
The signature Arizer glass aroma tubes preserve pure flavour, while the simple design makes cleaning easy—no complicated parts or deep scrubbing needed.
What's in the Box
1 x Arizer Solo 3 Vaporizer
1 x USB-C Charger (5V, 3A)
1 x XL Glass Aroma Tube (90mm)
1 x XL Frosted Glass Aroma Tube (14mm)
1 x Air/Solo Glass Aroma Tube (90mm)
1 x Air/Solo Frosted Glass Aroma Tube (14mm)
4 x Air/Solo Silicone Stem Caps
2 x PVC Travel Tubes w/ Caps (90mm)
2 x PVC Travel Tubes w/ Caps (70mm)
1 x Stainless Steel Stirring Tool
4 x Air/Solo Stainless Steel Filter Screens
1 x Solo 3 Owner’s Manual
Why Choose the Arizer Solo 3?
Rapid 5-second heat-up, hybrid heating
Massive battery life – up to 3 hours per charge
USB-C fast charging for easy power-ups
Pure vapour quality with all-glass pathways
Rugged, yet portable design for everyday use
The Arizer Solo 3 is a powerhouse designed for serious users who demand premium vapour quality, long battery life, and effortless performance.
See our full video review of the Arizer Solo 3 here.
For US customers, please visit sneakypetestore.com to purchase the Solo 3.
The New DynaVap Helix Titanium Tip
It’s not news that DynaVap has a history of great aesthetic design, from the Omni to the VonG, but they’ve really taken it to the next level with the DynaVap Helix Titanium Tip. DynaVap is known for their engineering chops, and they are on full display with this piece.
Helix Design Leads to Better Results
We all love a good pun, and DynaVap never fails to deliver them. This time around it’s both actual and factual: the Helix Tip puts a whole new twist on their design. We’ll give you a second to collect yourself. Once you get past the pleasing aesthetic of the triple helix design, you’ll be happy to learn that the looks are not the only upgrade. The Helix Tip acts to reduce heat transfer from your Tip to your Stem, effectively keeping the thermal mass where you want it to be to provide you with the best vaporizing results.
Weighing in at just over 3 grams, this is DynaVap’s lightest tip yet and that was done with the purpose of reducing mass and increasing surface area to dampen the heat transfer. This added functionality and intent are the true differentiators of this DynaVap Tip. The walls of the chamber, though lighter, are thicker and that will act to retain heat and provide a nice even roast for your flower.
Add Convection Heat to the Mix
A first for DynaVap, this Tip has 3 ports that add convection heat to the equation, and that is a big departure from the 100% conduction heat we’re used to seeing in Tips. These 3 machined internal channels help with airflow and provide evenly distributed heat to the entire chamber of flower.
Like all recent DynaVap devices, it does include the Adjust-A-Bowl mechanism that provides the ability to switch between regular and half sized bowls and our Half-Bowl Converter works with it perfectly as well. The gold colour of the Tip is achieved through a newly developed surface treatment from Dynavap that doesn’t just look stylish, but also adds durability and scratch resistance to the titanium.
The DynaVap Helix Titanium Tip Delivers
Here's a final tip: you will always be impressed with your DynaVap products. They bring top notch design, engineering, and production in every build to bring you the best torch or induction heater powered portable vaporizer they possibly can, and DynaVap Helix Titanium Tip continues the legacy.
Magnetic Vape Shovel Makes Loading Easy
You know, although you’ve probably never seen your fingers ‘fing’, they’re definitely not for loading your favourite vaporizer. It’s actually kind of staggering how many elements of the vaping experience were improved upon before companies started addressing the need for vape loading tools, but now it’s an integral and necessary part of the process. The Magnetic Vape Loading Shovel makes loading your vaporizer much easier and cleaner to load with less flower ending up on the floor.
The Next Level of Loading Tools
Using a tool like the Vape Loading Shovel, you’ll find you have additional maneuverability while loading your vaporizer as this instrument was designed specifically for the job. Measuring just over 3” tall, the Magnetic Vape Loading Shovel has a magnetic base so that it secures in place on magnetic surfaces, and a healthy sized Loading Shovel on the other end.
Designed with Intent and Purpose
The Shovel features a small cut-out on the tubular shaft to provide your fingers a natural place to fing… err grip. The payload on the shovel is designed to fit with and load in the majority of popular vaporizers and is shaped to hold the flower while loading to limit spillage. Starting from the lip, the high edges taper as they go back to provide free access and precision to the edges of the shovel. The capacity is pretty “Goldilocks” (not too big, not too small); you’ll find a couple of shovels full will help you through your hardest days, white half a shovel is ideal for microdosers.
Brass or Titanium, We’ve Got You Covered
Please, keep in mind that this is metal, and you don’t want to scrape a metal tool on a metal grinder, so load in accordingly. Available in both brass and titanium, the Magnetic Vape Loading Shovel will ease the loading process with probably every vaporizer that you own.
DynaVap totally redesigned their Omni Titanium Tip for the 2021 season and the update amplified everything we loved about the previous year’s model. This intricately designed tip works and looks better.
The 2021 Omni Tip has a contoured extraction chamber with a nona notched tip. It can act as a direct grinder to load flower into the chamber; just stab it into your flower and twist to load. The tip also has a trisected nine fin profile that helps cool down the extraction efficiently. The dual position Adjust–a–Bowl lets you choose your chamber size and works with the Sneaky Pete Half-Bowl Converter to help you get more bud for your buck.
Using a simplified two o-ring system, the 2021 Omni Tip is easier to maintain than its predecessor. The 2021 Omni Titanium Tip is your go to for a DynaVap experience concentrated on thermal cooling.
Blazer Firefox Torch
Compact. Controlled. Ready to Rip. The Blazer Firefox Torch is a lightweight, butane-refillable torch with the signature power and reliability Blazer is known for. With a 2500ºF wind-resistant blue flame and easy piezoelectric ignition, it delivers consistent heat in a compact, ergonomic body that’s made to move with you.
Perfect for the Anvil Vaporizer
This torch is a top pick for use with the Anvil vaporizer and similar setups that require consistent, controlled heating. Its continuous flame lock and steady output make it a trusted tool for dry herb connoisseurs who value both power and discretion.
Key Features:
2500ºF Blue Flame: Wind-resistant and hot enough for any torch-powered vaporizer.
Piezoelectric Ignition: Quick and easy startup with the push of a button.
Compact & Lightweight: Just 4.5” tall and only 7oz, great for on-the-go sessions.
Trigger Lock for Safety: Prevents accidental ignition and adds peace of mind.
Continuous Flame Lock: Keep the flame running without holding the trigger.
6g Gas Capacity: Provides approx. 20 minutes of burn time at full volume.
Durable Outer Finish: Sleek, discreet, and built to last.
Why Choose the Firefox?
It’s discreet, reliable, and efficient — a great companion for your torch-powered vape sessions. Whether you're at home or out and about, the Firefox offers the performance you need without taking up space or drawing attention.
Tech Specs:
Flame Temperature: 2500ºF
Ignition: Piezoelectric
Burn Time: ~20 minutes at max fill
Fuel Type: Refillable butane (not included)
Height: 4.5”
Weight: 7oz
Includes:
Blazer Firefox Torch
Built-in safety trigger lock and continuous flame switch
Consistent Heat. Zero Fuss.
The Blazer Firefox is everything you want in a compact torch: discreet, powerful, and designed for repeat performance. It's an ideal choice for the Anvil and other torch-based setups — all at a price that makes sense.
Product Overview
We love solid, easy to use 510 cartridge vaporizers, and CCell just upped the game with their latest offering the Rizo. We’ve been enjoying CCell vapes for years, and their newest model, the Rizo, is the Cadillac of the 510 vaporizer game, no doubt. Let’s take a gander at what they’ve brought to the table this time around.
Battery Life
Like their Palm and Silo, the Rizo works easily with almost any 510 cartridge you could find. Using a smart connect magnet, your cartridge sits snugly in the enhanced Rizo that is now packing a whopping 300mAh battery to keep you vaping all day long with the one that you want.
Rizo Size
The CCell Rizo is tiny and designed for your pocket measuring in with a miniature 62mm x 34mm x 15mm footprint. The body is made from a metal alloy that is sturdy and will last the life of the device. The Rizo also has a new LED battery indicator to provide information at a glance as well as a vibration motor that provides haptic feedback. This makes it even easier to use because you can now vape totally by feel.
How To Use
The Rizo is activated by inhaling, there’s no need for a button or anything of the sort; just breathe in when you’re ready. We’re also glad to see an upgrade to USB-C charging but the new feature that really blows all other 510 vaporizers away is the voltage switch that lets you amp up the ferocity of your session, choosing from flavour or vapour production focused options, with a selected voltage of 2.8v or 3.3v.
CCell is the goat, for sure of the 510 vaporizer game and the CCell Rizo is their best offering yet. For those of you hitting 510 cartridges on the go, there’s no better choice.
The Restrictor Discs are a game-changer for the Sticky Brick lineup! These 316 Stainless Steel discs sit between your flame and your herb in your Brick. They put your Sticky Brick on "Easy Mode", enabling you to learn the proper technique while greatly reducing the possibility of scorching your herb. They serve to reduce the direct heat that can come into contact with your flower to scorch it, and allow you to hold your flame much closer to your intake, or even to use a larger flame. If you've ever struggled trying to use a Sticky Brick, or want to experiment with a larger torch, or just want a more straightforward experience, I highly recommend these!
Upgrade Your DynaVap: The BallR Cap for Enhanced Convection Vaping
Transform your DynaVap into a powerful ball vape with the BallR Cap—a revolutionary upgrade designed for better flavour, improved heat retention, and a pure convection experience.
What Is the BallR Cap?
The BallR Cap is an extended-length cap that works with any standard DynaVap tip. Inside the top portion, stainless steel balls absorb and retain heat from your torch or induction heater. When you inhale, the stored heat washes over your flower, providing a true ball vape experience with increased power and efficiency.
Why Upgrade to the BallR Cap?
Full Convection Heating: Unlike traditional DynaVap caps, which rely heavily on conduction, the BallR Cap shifts your vaping experience to pure convection. Heat is retained in the stainless steel balls and only released when you inhale, maximizing flavour and efficiency.
Stronger, More Potent Vapour: By eliminating preheating of your flower, terpenes and volatile compounds remain intact until inhalation, ensuring better flavour and stronger effects.
Improved Heat Retention: The stainless steel balls act as a heat reservoir, allowing for more consistent, powerful draws.
Universal Compatibility: Works with any standard DynaVap tip, making it an easy upgrade for any DynaVap user.
How to Use the BallR Cap
Attach the BallR Cap to any standard DynaVap tip.
Heat the cap using a torch or induction heater until it clicks.
Inhale for a smooth, convection-powered vaporization experience.
Enjoy the improved flavour, efficiency, and vapour density.
FAQs About the BallR Cap
Q: Will this fit my existing DynaVap setup?A: Yes! The BallR Cap is compatible with any standard DynaVap tip, making it a seamless upgrade.
Q: How is this different from a regular DynaVap cap?A: Unlike a standard cap, the BallR Cap uses stainless steel balls to retain heat, shifting the device to true convection vaping.
Q: Does this work with induction heaters?A: Yes! The BallR Cap works with both torch and induction heating, although performance is optimized for specific induction heaters like the Wand.
Q: Is this more efficient than a regular DynaVap cap?A: Yes! Better heat retention means you extract more from your material with less waste, making your sessions more efficient and flavourful.
Why Choose the BallR Cap?
Enhanced Vapour Quality: Stronger, smoother, and more flavourful convection vapor.
Budget-Friendly Upgrade: Affordable price for a game-changing enhancement.
Versatile & Durable: Works with any standard DynaVap tip, built to last.
Optimized for Induction & Torch Heating: Best performance with The Wand heater.
Elevate your DynaVap experience with the BallR Cap—the most accessible way to enjoy the power of ball vapes in a portable format.
Totally redesigned for 2021, the VonG Titanium Tip by DynaVap has a sophisticated new design that improves both form and function.
The Nona Notched Tip has a contoured extraction chamber and can be used directly as a grinder to easily load flower into the oven; just press the tip into your flower and twist to load. The trisected five fin profile is designed to retain more heat than other titanium DynaVap tips to optimize usage with a water piece. The dual position Adjust–a–Bowl lets you customize your chamber size and works perfectly with the Sneaky Pete Half-Bowl Converter.
Capitalizing on a two o-ring design for easy maintenance, the VonG has fewer fins than the 2021 Omni and is built with thicker fins for better heat retention and larger hits. Take advantage of the 2021 VonG Titanium Tip for a DynaVap experience that focuses on sizeable doses.
An Easier Way To Carry & Use Your DynaVap
Introducing the new SlingStash from DynaVap, a discreet and portable solution for storing your favourite DynaVap vaporizer in a slim, easy to carry package. Crafted from machined aluminum tubing and secured with an overlapping silicone Sling, this SlingStash gives you the convenience of on-the-go usage or general storage at home, without worrying about dirt or debris getting into your device.
Integrated DeCapper & Built In Flower Storage
The SlingStash is more than just a case though, it also includes a number of features that make the whole DynaVap experience easier. The case includes an integrated DeCapper which provides easy one-handed device use in any situation. And don't worry about hearing it rattle – the SlingStash is designed to eliminate that sound entirely, adding discretion to every carry. The tight fit of the connections helps to keep the smell inside the SlingStash rather than your pocket, and the silicone cup will hold about 3-5 cycles worth of material, meaning you can not only bring your vape but also your flower with you in this single convenient storage container.
Works With Standard (92mm) & XL Stems
The SlingStash works with most DynaVap stems and setups as it has a removable silicone interior that allows it to work with XL devices like the OmniVap, but it is not recommended for glass DynaVap stems like the BB9 for example.
Are You Sponge Worthy?
We find that sometimes after big dabs, there can be concentrate left over in your banger, and if left alone it will typically bake on and become harder and harder to clean over time. Some concentrate fans swear by using Q-Tips, but it is probably because they’re ubiquitous rather than being a great solution. Enter the DabSponge, your new favourite way to thoroughly clean your dab rig or quartz banger.
A Better Way To Clean Bangers
The DabSponge isn’t just an alternative to using swabs, its closer to moving from using a broom to using a bat to hit a baseball; it’s a complete upgrade in every fashion and is more effective because of it. Cotton swabs have very little surface area, they absorb slowly, and their absorbent capacity is low as well, so they are truly an ineffective solution. If you really want to truly enjoy your concentrates you need a clean banger or nail, and the DabSponge will do that in a hurry.
Wider, More Absorbent & Reusable
The DabSponge is a wider, more absorbent solution compared to a cotton swab, and it will do a better job cleaning your residual concentrate, as it was purpose built for just that task. Not only is the diameter of the DabSponge more appropriate for a banger, but it can also absorb the volume of several Q-Tips. The surface of the sponge can handle temperatures up to 400°F, but things are easiest to clean at 100°F - 150°F. If you follow the manufacturer’s suggested process, you can get a lot of uses out of each sponge rather than tossing multiple Q-Tips per dab.
Works Better And Faster Than Q-Tips
Hey, we know you. You’re a dabber with impeccable tastes, who appreciates using the proper tools for the job, so we know that all of your dabs are sponge worthy. The DabSponge is a way better option than what’s currently on the market and will help your pieces stay clean and last longer. Clean it up right, the first time, with the DabSponge.
The VonG has gone Full Metal Jacket!
DynaVap has proudly rolled out the new VonG (i), a reinterpretation of their brilliant VonG portable vaporizer with a new super-tough titanium rotational middle section. This beast is unstoppable.
Built to Use with a Water Pipe
Like its predecessor, the VonG (i) prides itself on being the most water pipe friendly offering from DynaVap. It boasts all of the same features we loved so much on the original VonG - a trisected five fin profile, Adjust-A-Bowl, and a tip that creates complex airpaths. You’ll love the way the VonG (i) performs in all situations, and the included Zebrawood SlimStash makes it easy to bring everywhere you travel.
ISO and Wood Don't Mix Well
While the wood middle section of the original VonG is beautiful, it can be a little difficult to clean since it doesn’t lend itself well to the tried-and-true dunk in isopropyl alcohol method of cleaning. Replacing the wood with an easy to disassemble titanium section means that restoring it to brand new looks and feeling is now a snap. The rotational action itself has also been improved. DynaVap has a variety of interchangeable middle section sleeves coming soon, so you'll be able to personalize the looks of your VonG (i).
Gorgeous Inside and Out with Incredible Effects
Beautifully packaged in an aluminium case with wooden caps on each end, you’ll be thrilled to have this gorgeous piece in your collection. The original VonG was the best DynaVap vaporizer for use with water pipes, these incredible new upgrades have made it even better, add the VonG (i) to your arsenal today.
Improve your VENTY Setup with Water
The VENTY is an incredibly powerful device, and it’s so consistent and portable, we find that we take it everywhere. Unfortunately, if you’re chasing those big clouds that it is very capable of putting out, the vapour from the VENTY can get both plentiful and a little drying over extended use. Enter the VENTY Curved Bubbler, the ideal way to add a little hydration and cooling to your VENTY setup.
Easy to Install, Easy to Use, Easy to Clean
The Curved Bubbler is auto-levelling, so just add water to it for a few seconds and it will drain naturally to the appropriate level. All that’s left to do is let it dry so there is no residual water to drip down, then twist the whole thing back on your VENTY - just twist off the VENTY’s included cooling unit, then twist the silicone base piece on to your VENTY.
The Curved Bubbler is very easy to clean, just slide it out of the silicone base when it’s time to dunk the glass. We like to give the glass a good ISO bath every now and then to keep it looking brand new.
Intentionally Designed for Comfort and Performance
We love the overall shape of this Bubbler. It’s a decent sized piece, so it will provide a healthy amount of cooling, and it’s tall so it’s comfortable to use. For those of you like to hit your VENTY from the couch, the curved mouthpiece makes using your device while inclined super comfortable, just be sure to keep your device upright while in use. While it does include a glass screen at the bottom to hold your flower in place, this device is even better when used with dosing capsules.
Different than the Included Cooling Unit
With the VENTY Curved Bubbler, a small amount of water and glass will significantly outperform the included dry cooling unit. With this Curved Bubbler, keep the portability of the VENTY while still being able to take advantage of water cooling.
For Experts Only
Chuga chuga, chuga chuga, chuga chuga get your water pipe ready, cos the Freight Train Engine is about to leave the station, ready to bring you that max relaxation. The next step in the evolution of one of our favs, the Freight Train, this behemoth is for serious conductors only. So, toot your whistle and let’s get moving.
Prepare for Super Charging
There is nothing wrong with the Freight Train; like, nothing at all; it is a great entry point for new injector vape users and pros alike. But it is focused on a consistent experience and its aim to be usable by beginners - it doesn’t really allow you to engage the supercharger, so to speak. The Freight Train is geared towards those hardcore vapers that demand clouds so big koopa troopas are dropping hammers on you.
Huge Clouds Will Challenge your Capacity
The Freight Train makes those big clouds happen by providing a wide-open air pathway that offers as little resistance as possible. Now, this really opens up the amount of vapour that can potentially come rushing at you, so if you’re not an elite vaper, take a few nibbles before biting all the way down or you might find yourself hit by the Freight Train so to speak.
Beautiful and Ready to Go
The Freight Train comes with a coil guard included and pre-installed, which is convenient and allows you to get up and going right out of the box. You’re also getting the new integrated heat shield/stand, which is a welcome improvement over the previous generation. While the Freight Train retains the majority of the theory and practice behind the original, and other injector style vaporizers, the FTP is distinguished, and will really put you down for the count. So, whether you’re upgrading from the original, another model, or if this is your first injector vaporizer, you’re about to use the top dog on the market.
WARNING:- High-Power Heater! Use with caution!- Exposed coil/element is extremely hot. Do NOT touch once powered on!- Do not leave unattended while powered on!
This base piece fits on the bottom of your Pocket Micro Torch, giving it a wide and stable footing so it stands upright. While this torch is definitely one of the best available, many have said they want a way to keep it standing up when not in use. This add-on is a quick and affordable upgrade to do just that!
Rise Up and Cool Down with the Arizer Bead Stem
Many of our favourite devices come equipped by default with a relatively short output that does very little to substantially impact the cooling of the vapour that’s created, resulting in unwanted coughs and unnecessary sore throats. Ideally, you’re going to want to run your rig through water for the best cooling, but if you’re out and about, that’s rarely an option. The Arizer Bead Stem is an incredibly effective cooling stem that will work with several of the most popular and powerful devices available. Let’s dig into what makes the Arizer Bead Stem so great.
Familiar Technology Executes Impressively for Better Cooling
By now, most of us are familiar with ball vapes, but for those who aren’t, essentially your flower is vaporized by a wand that’s head is full of quartz balls heated by an electric coil. With the Arizer Bead Stem, we went in the exact opposite direction; the quartz beads in the stem act to pull heat from your vapour to provide a more enjoyable session. These balls are on the larger side and are effective at drawing a tonne of heat out of your vapour while providing less airflow restriction than the smaller balls you’ll find in other stems.
A Lateral Evolution of the Rocket Stem
Speaking of the Rocket Stem, the Bead Stem has a thinner profile making it easier to take on the go. You can also remove the beads in the Bead Stem, making it even easier to clean than the Rocket Stem. The Bead Stem has a two-piece glass section, one section that holds the quartz balls in place and the second part that connects to the stem through a gasket connection. This choice for a two-piece construction allows for the easiest maintenance and maximum airflow possible.
Effective, Compacted and Ready to Take with You
The Arizer Bead Stem attaches to your device directly and includes a built-in permanent glass screen for easier maintenance. The Arizer Bead Stem works with the Solo 3, Solo 2, Solo 2 MAX, Air MAX, Air SE, and is a highly efficient, compact stem that will definitely outperform the standard dry stem that your device was shipped with.
Behold the DynaVap M7 XL Colours – Fall Edition
Introducing the new limited-run DynaVap M7 XL Colours – a seasonal release featuring two stunning new variations: Obsidium and Rosium. When these exclusive Fall Colour versions are gone, they're gone for good.
The Obsidium edition showcases a sleek, dark aesthetic inspired by the natural beauty of volcanic lava cooling to form obsidian. The torch flame reveals smoky black tones with hints of amber, making this M7 XL not only a visual masterpiece but also a durable device that’s built to last.
The Rosium version offers a unique, ever-changing colour experience. It features vibrant hues of purple, pink, and gold, which shift and evolve over time with use. No two Rosium M7 XLs are alike, adding a personalized touch to each device while maintaining the exceptional performance DynaVap is known for.
Bigger is Better with the DynaVap M7 XL
The DynaVap M7 XL takes the beloved M7 design and expands it, offering a longer stem for enhanced cooling and a more comfortable experience. The XL’s tapered mouthpiece fits natively into a 10mm water piece, and the zigzag airport adds a unique visual and functional flair.
Redesigned Tip for Superior Hits
The M7 XL features a completely redesigned tip with a Septa Serrated Crown, allowing you to grind flower directly from the bud. The updated thermal mass under the oven delivers larger hits while transferring less heat into the stem, satisfying even the most demanding users.
Adjustable Airflow with Precision Design
The M7 XL’s condenser offers built-in adjustable airflow, which locks in place with a simple click. The device also boasts an o-ring free condenser for a smoother, more reliable experience.
A Sophisticated Look with High Performance
With its sleek and understated design, the DynaVap M7 XL is perfect for both personal and professional environments. Combining luxury aesthetics with world-class functionality, the M7 XL outshines previous iterations while coming in at a surprisingly accessible price point.
The Ditanium Vaporizer Quartz Nail Insert will work as a direct replacement for your included quartz. This bowl comes directly from the manufacturer so it will provide an exact fit. Quartz Nails will naturally whiten over a period of time, so it's recommended to change your nail out occasionally to retain the best flavor and function.
It is easy to replace the Quartz Nail Insert by turning your device off and unscrewing the assembly. Then, simply remove the old Quartz and replace it with your new Insert and you're done!
You Needed it, We Did It
The poet laureate of Canada, Avril Lavigne, once pined, “why you gonna make things so complicated?” Well, keeping it simple is great and it has its place, and we visit that place often, but sometimes you just want to amp it up. Gear upon gear upon gear. Hell, we make a four-man water piece, you know we like to bring it now and then. Take the leap with us into the absolutely unique Pass-Through Micro Bubbler.
A Bong for Your Bong
The ingenuity of the PTMB starts with a 14mm intake that feeds into a micro bubbler from your main glass piece’s intake. Then attached to the side of the micro bubbler, there is another 10mm joint and there’s a matching glass stopper you can utilize with that joint like you would with any carb, but it will serve the function of not just emptying the micro bubbler, but your glass piece as well.
Measure Twice, Buy Once
While this is an incredible system, it will not work with all shapes and sizes, so make sure that your piece will fit before you go down that road. Or buy another piece that will fit, we’re not here to tell you what to do. Also, make sure the piece you’re connecting it to has some heft, as this PTMB has some weight to it as well and you don’t want the castle to come crumbling down.
Double the Fun
The Pass-Through Micro Bubbler is like putting another gun on your gun, a knife on your knife, a guitar on your guitar; you might think twice, but you’ll be glad that you did it. You’ll definitely look as cool as Jimmy Page while using the PTMB, that we can guarantee. Use it as a carb, extra hydration or just to look cool, just use it.
Keep it clean, keep it wipey! Your glass items, vapes, and accessories will shine with Great White Wipes. Our individually wrapped wipes are made with 99% isopropyl alcohol, made of sturdy material to give them the strength to handle the toughest jobs. There's no scent or additives, and the purity of the alcohol means the Great White Wipes will leave your vaporizers clean and hygienic, with no residue left behind. Each wipe measures an expansive 20cm x 15cm, so there's no fussing with undersized wipes. Whether sharing a puff with a friend, or just doing some regular vape maintenance, these wipes will ensure fresh clean hits. Our wipes come in a bargain sized pack of 50 individually packaged wipes.
Wipe out grime and germs, and make your vapes pristine, with Great White Wipes.
Replace Your Screwball/Pinch Hitter/Ace Bowl Screens
The Screwball Bowl Screens are OEM replacements, designed for the original screens included in your kit. Crafted from high-quality stainless steel, they come in two sizes: 15mm for the micro bowl and 20mm for the full-size bowl, ensuring the perfect fit for your needs.
Replacing your screens regularly is essential for maintaining proper airflow and maximizing performance. These screens are affordable, easy to swap out, and ensure your device continues to deliver consistent results. With quick and simple installation, you can keep your bowl functioning at its best in no time.
A New Ball/Injector Vaporizer From MiniNail
Many started using an enail as a primary dab unit right around the time working from home became more common and we swear there’s no correlation. The MiniNail enail is an incredibly durable, consistent, easy to operate desktop dab rig that remains the best option available to this day. Not known to rest of their laurels, flash forward a few years, technological advancements and now, Seattle based MiniNail is ready to enter the Ball Vape space with the MiniNail Flower Wand Dry Herb Vaporizer Kit. Let’s get to know your next desktop vape.
Built In Seattle, All Day Convenience
Utilizing the power of quartz balls and a 20mm heating coil, the MiniNail Flower Wand is extraordinarily well thought out. The coil heats the quartz balls and creates a huge heat reserve, and this instantly surrounds your flower with full convection heating when you inhale, providing a the strongest and most flavourful experience possible. You can dial in your ideal temperature by the degree and it only takes about 3 minutes to reach it from cold. Couple this with a brief 10-minute cooldown time, if you decide to turn it off, and your Flower Wand will be hot when you want it to be, and you can even control things with a smart plug should you wish. In addition to that, the MiniNail Flower Wand includes a silicon handle and a stand, so safety is a priority from this team. The MiniNail crew builds and tests every unit in Seattle and their warranty is great; they really stand behind their products.
Powerful Flower Wand Produces Maximum Vapour
Ball vapes, by nature, are designed for heavy hitters who love getting one big, flavourful cloud at a time and their extreme power keeps the temperature up, enabling you to hit back-to-back to your heart’s whim. But that doesn’t mean they can’t be incredible microdosers as well. MiniNail said - let’s do both. The included bowl is one of the most functional we’ve seen, made from grade 2 titanium with a removable screen and a 0.5g capacity if you’ve got the lungs to try. The MiniNail Flower Wand is a truly bulletproof option for users of any level of experience and is compatible with almost any water piece, regardless of the size or orientation of the joint! This is truly a whopper of a kit..but wait… there’s more.
Accessory Bundle Available For Current MiniNail Owners
Anyone who currently owns a MiniNail enail can purchase JUST the Flower Wand Accessory Bundle and turn their current equipment into a dual threat at a more affordable price point. And on the flip side of that coin, if you own a Flower Wand, you can buy the enail piece and achieve the same effect. As they’d say on 30 Rock, that’s a Twofer. A Ball Vape with premium airflow and construction, the MiniNail Flower Wand was not something we were expecting from a company known for extract rigs, but when the end product is so good, you gotta love being surprised.
Read our full review of the MiniNail Flower Wand here.
Glass Adapter For The Venty Vaporizer
Intensify your vaping experience with our 3-in-1 or 14mm glass water pipe adapter designed for the Venty vaporizer. By integrating a water pipe into your vape setup, you'll experience cooler vapour and smoother, fuller hits. This versatile adapter fits snugly into 10mm, 14mm, and 18mm female water pieces - or comes as a 14mm only option - ensuring compatibility across different setups.
Easy To Install & Remove
Installation is a breeze: remove the cooling unit from your vaporizer, align the slots on the adapter with the device's slots, and gently twist to secure it in place. Be sure not to over tighten, partial turn is all that is required to secure it in place. Once attached, connect your Venty to the water pipe of your choice and savour the smooth, water-enhanced hits. Venty users seeking an enhanced vaping experience will find this adapter indispensable after some time with it.
2 Piece Design Keeps It Easy To Clean
Crafted with a durable plastic housing that surrounds borosilicate glass for a pure vapour path, our adapter also comes with a replaceable screen for added convenience.
The Venty 3-In-1 Glass Adapter is NOT compatible with Dosing Capsules.
The Venty 14mm Glass Adapter IS compatible with Dosing Capsules.
