Keep Your Flavour Pure with New Screens
It doesn’t matter how much you spent on your vaporizer, it will need to be maintained and it’s in your best interest to replace any necessary parts with OEM parts from the manufacturer. In the case of the VENTY, the screens won’t break down, per se, but they will always perform better when they are regularly replaced. You’ll make sure that your airflow is unimpeded, and your taste is optimal by switching out the screens on your VENTY with the VENTY Screen set from Storz & Bickel.
The Mighty+ SkinStand Can Save Your Device
Football players wear helmets to protect their domes, cars have airbags, but what are you using to keep one of the most high-end vaporizers in your arsenal safe? The Mighty+ SkinStand is a precision-made silicone skin for your Mighty+ that has a high temperature tolerance that both mitigates heat while providing ample protection for your device. You know that we love it when a product is multi-faceted, so let’s take a look at this bad boy.
Not Speed Holes, Air Vents!
Proliferated with dappled holes and cut-outs throughout, these gaps act to allow your vape to vent heat naturally. The SkinStand also provide a much better grip on your device, and we all know how important that gets towards the end of a hardcore session. Not only do the cut-outs vent the heat from the vape, but they also provide full access to all buttons and ports including the screen and controls, the USB-C port, power button and even the kickstand!
Stand and Deliver
So far so good, am I right? The next benefit is almost as important as the added protection: the SkinStand acts as a support that will allow you to stand your device up, something the Mighty+ can’t do on its own. Similar to how our Mighty+ Stand works, you can now have your device standing up properly, making it much easier to load and allowing for a more natural use position.
Can’t Drop Your Device if it’s Tethered to You
The Mighty+ SkinStand includes a dust cover to keep the odours in while providing even more device protection. You’ll remove the dust cover while using the device, leaving the silicone to end below the cooling unit providing unfettered access to your chamber. Finally, there is a wrist strap tether included that will safely connect the device to your person. This should stop you from dropping it in the first place, something we refer to as the "belt and suspenders" setup.
Your Mighty+ wasn’t cheap in the slightest, being able to add protection that looks as good as the security it provides is a no brainer. The SkinStand is available in Neon Green if you’re feeling saucy or Black for that classic look. The Mighty+ SkinStand protects your device, helps keep it cooler and looks good doing it.
Magnetic Vape Shovel Makes Loading Easy
You know, although you’ve probably never seen your fingers ‘fing’, they’re definitely not for loading your favourite vaporizer. It’s actually kind of staggering how many elements of the vaping experience were improved upon before companies started addressing the need for vape loading tools, but now it’s an integral and necessary part of the process. The Magnetic Vape Loading Shovel makes loading your vaporizer much easier and cleaner to load with less flower ending up on the floor.
The Next Level of Loading Tools
Using a tool like the Vape Loading Shovel, you’ll find you have additional maneuverability while loading your vaporizer as this instrument was designed specifically for the job. Measuring just over 3” tall, the Magnetic Vape Loading Shovel has a magnetic base so that it secures in place on magnetic surfaces, and a healthy sized Loading Shovel on the other end.
Designed with Intent and Purpose
The Shovel features a small cut-out on the tubular shaft to provide your fingers a natural place to fing… err grip. The payload on the shovel is designed to fit with and load in the majority of popular vaporizers and is shaped to hold the flower while loading to limit spillage. Starting from the lip, the high edges taper as they go back to provide free access and precision to the edges of the shovel. The capacity is pretty “Goldilocks” (not too big, not too small); you’ll find a couple of shovels full will help you through your hardest days, white half a shovel is ideal for microdosers.
Brass or Titanium, We’ve Got You Covered
Please, keep in mind that this is metal, and you don’t want to scrape a metal tool on a metal grinder, so load in accordingly. Available in both brass and titanium, the Magnetic Vape Loading Shovel will ease the loading process with probably every vaporizer that you own.
All Clean Everything with Pipe Plugs
The next few days after we clean our glass, it’s common to notice that residual isopropyl smell. That smell isn’t coming from your glass, it’s on your fingers, from plugging the holes on your water piece while you shake it. The Pipe Plug completely erases the issue in the simplest of ways, and the results are a cleaner glass piece and normal smelling thumbs. Count us in!
A Tight Seal in Two Colours
Pipe Plugs are made from either black or green silicone and are designed to seal the joints on your water piece to facilitate a more thoroughly sealed ISO shake. Even with your thumbs, some alcohol will leak out and if you don’t use any stopper at all, you’re about to make a sensational mess.
Easy to Use and Multi-Sized
Super simple to use, just 'screw' the Plug into your intake joint or mouthpiece and that’s it. We recommend giving it a less vigorous shake to start, just to make sure the Plug is in nice and tight. If you’re using a 14mm joint, make sure the pointy end of the Pipe Plug is point up, and the result will be a super tight seal. If you have a 10mm or 18mm joint, place the Plug pointy end down and then 'screw' it in place, tightly, until you have a proper seal.
When shaking liquid in any water piece, we recommend doing it over a sink and again, testing the seal before you get vigorous, just to be on the safe side. When you have the proper seal, you’ll be able to give it a good, proper shake, needling less ISO than you’re used to using.
Pipe Plugs Make Glass Cleaning Easy
The Pipe Plugs are not recommended to be used with male joints, but with females, they are the best way to plug the openings on your water piece. This is a much easier and more thorough way to clean your favourite water pipe.
Add Convenience To The Tinymight 2
If you’ve been following us for a while, you’ll be well aware of how much we love Dosing Capsules in general, and if you haven’t, this is a great opportunity to learn why they’re so popular with vaporizer enthusiasts. Simply, Dosing Capsules are a great way to add a little proactivity to your sessions by enabling easy, clean reloading and the Tinymight 2 Dosing Capsules will satisfy those needs for everyone’s favourite portable vaporizer. Dosing Capsules are the most convenient way to add flower directly to the stem of your Tinymight 2. The amount is measured, the activity repeatable and the results are consistent. Using Dosing Capsules instead of filling your stem directly is not only quicker, but also cleaner and will result in less day-to-day maintenance for your device.
Preload A Full Day Of Vaping
The peak of convenient power is to head out with a few Dosing Capsules and a Tinymight 2. The device is super-efficient and it’s almost blasphemous not to capitalize on that by saving time with your packing as well by taking only seconds to preload an entire day’s worth of sessions and bringing them with you. After you’ve extracted all the active material from that Capsule’s cargo, swap it out with a fresh one! It literally takes seconds, causes no mess and is good to go.
Less Maintenance & Faster Reload
The Tinymight 2 Dosing Capsules are the size of the bowl of the device, so they’ll fit in your favourite stem as long as it’s standard sized. Made from a two-piece metal construction, the lid and body of the Capsule are pressure fit and will hold the preloaded capsule securely. What was a pleasant surprise was how similar the draw was when comparing using the Tinymight 2 natively to using it with a Dosing Capsule, so you shouldn’t see any loss in your ability to create the massive clouds the device is known for.
The Tinymight 2 Dosing Capsules are available in packs of 1 or a Tube of 5 and are the perfect complement to this great portable vaporizer. Repeatable results, big clouds, nice and clean… almost why you bought a Tinymight 2 in the first place :P
A Necessary Accessory For Your Mighty+
The Mighty+ Vaporizer Stand is a perfect way to enhance your Mighty+ experience! It allows full access to all functions and buttons on the Mighty+ while it's in the stand, meaning you can charge via USB-C and change temperatures while your Mighty sits happily upright on your desk. The stand is made from a hard and durable polycarbonate that will last for years while not scratching your Mighty+.
With the Mighty+ in a vertical position, viewing the screen and changing temperatures is much easier, it's the stand that the Mighty+ should have included!
The Replacement Filters for the Vapman are an OEM product made to replace the original, native filters. If your Vapman filter gets damaged or overused, or even if you’re just looking for that “fresh out of the box” appearance, this product will impress.
Durable and made from high quality stainless steel, the Vapman Replacement Filter is an easy to clean product that functions identically to the original.
These Replacement Springs for the Vapman are an OEM product, meaning they will fit and act exactly as you expect.
If your springs ever wear out, these Replacement Springs are what you need. They are made of the same special spring steel as the originals and will last just as long. So, if you want that brand-new look and feel again, re-spring your Vapman with Replacement Springs.
The Best Way To Store Your Cannabis
The Jyarz line of storage units is absolutely top notch and satisfies all the components you’re looking for in flower storage. Keeping your product properly stored is paramount in ensuring vapour quality as UV light and moisture loss can result in damaged trichomes and less overall active material in your bud.
Jyarz feature a three-layer solution to storage they call TripleBlock. The core layer is a borosilicate glass container that is surrounded in an exterior non-BPA plastic sleeve made entirely from recycled milk jug plastic. This provides the protection from light and elements necessary to keep your bud fresh.
Each Jyarz is rimmed with two Foodsafe latex gaskets that won’t add any taste to your flower and finally a top that screws in place to create an airtight seal.
The Big Papi is the largest of the Jyarz. It can hold a whopping 16 fl oz. If you’re storing large quantities, this is definitely your answer.
Jyarz are the ideal solution to flower storage as they keep it protected from UV, are airtight, and stored in materials that will never add odour to your flower. Ensure you’re getting the best out of your bud by storing it in Jyarz.
The Pordebowler from Old Head Trading Company is a travel debowler that facilitates emptying your devices and saving that precious ABV. Enjoying vapour from a multitude of devices is not only becoming more common, but they are now being utilized on-the-go more than ever.
Available in green or black, the Pordebowler is made from high grade, food safe plastic. The airtight seal secured by a silicone ring on the lid ensures that you’re not going to lose ABV in between sessions, while the deep reservoir provides ample room for weeks’ worth of use.
The Pordebowler includes a removable multi tool that not only functions as the debowler, but also acts as a tamping tool, and helps you easily remove or replace the CCD on your DynaVap devices. The debowler end of the multi tool reaches a very fine point, making it perfect for stirring flower in even the most difficult to reach bowls.
As cannabis is legalized in more places, hiding at home while you vape is no longer necessary, go mobile! And look good while doing it, with the Pordebowler.
**Capsules not included**
After many requests for a way to carry more Dosing Capsules we created the Crafty+/Mighty+ XL Capsule Hauler to provide a secure place to store up to eight preloaded capsules. Super convenient and with a striking new colour scheme composed of a black main body with a red upper section, the Capsule Hauler is perfect for heavy and medicinal users who seek out long sessions and also want to limit the amount of baggage they have to carry. Hook this odour-proof and water-proof capsule to your key chain using the included key ring for handy use.
All you’ll need to do is add your dosing capsules, fill them, and you will get a large number of full sessions from vapes including the Crafty, Crafty+, Mighty, Mighty+, and Volcano. You'll never be caught unprepared with the Crafty+/Mighty+ Capsule Hauler.
When glass meets glass, ensure the connection stays secure with our plastic Keck Clips. Whether you're securing a freshly filled bowl of flower, or keeping your mouthpiece or Sidestep Adapter firmly in place, these clips ensure that your glass stays safe and attached, helping you avoid mishaps and breakages. Keck Clips are sturdy and stiff, but won't scratch your glass piece. For peace of mind, get clipped.
The Sneaky Pete Multi-Stand brings extra stability to the Arizer Air or Air 2, providing a soft silicone base that'll keep your vape safely upright, which is especially useful if you're also using the BubbleMax. It's flexible enough to work with a variety of units, but it really shines with the Air or Air 2. The Multi-Stand is an affordable accessory that you'll find a host of uses for, and it comes in cool black silicone emblazoned with the Sneaky Pete logo. While it measures 24mm cubed (width, depth, and height) the pliable silicone will accept some larger vapes.
Add some stability to your vaping experience with the Sneaky Pete Multi-Stand.
Dab tools (used to scoop concentrate into your dab rig) are often makeshift: screwdrivers, nails, tent pegs, human teeth... They have to be metal to withstand the heat (ok forget the teeth) and they should be clean. What microscopic crud was on that screwdriver that you’re now inhaling into your lungs? Call me old fashioned but I believe in the adage 'a job for every tool, and a tool for every job'.
Cue the SPV Artisan Series - Long Handled Dab Tool. It’s purpose-built for dabbing, giving it optimal design and functionality. The pure grade 2 titanium spade was custom made by DynaVap, and it tapers to a spade, making it easy to scoop and manipulate your concentrate.
The handle is bespoke from Ed’s TNT, individually crafted from one of two woods: either Mexican T’zalam (pronounced salam) or Mexican Katalox. Both come from lumber with lots of curly stripes which gives a vibrant look. The Katalox is the denser of the two with a deep rich coffee/chocolate tone.
One of the best features of this piece is that no matter how you set it down, the tool won’t roll and the blade won’t ever touch the surface. This prevents contamination of the spade or losing precious material.
This is the first custom collaboration between two of our favorite vape artists, combining their strengths to form a line of connoisseur-grade vape tools.
Key Features:
- Brand new innovative dab tool- 4” long wooden handle by Ed’s TNT- 1.5” wide titanium blade by DynaVap- 5.5” total length- 0.5” thickness- Smart design prevents rolling and contact with surface- Wide titanium blade with a tapered point for ease of use- 100% made in the USA
These are official Healthy Rips replacement O-ring/Stainless-Steel Screen sets made to fit the Fury Edge SE or the Rogue SE. They come in a set of two and are perfect replacements if you've lost yours or just want some backups.
The Sneaky Pete Vape Tool is a 3" long stainless-steel multi-tool that’s great for loading extracts, stirring a bowl, scraping gunk off your vape or glass piece, and all kinds of other handy tasks.
One end is rounded, curved and scooped so you can get herb out of corners and clean in small spaces, and the middle grip is flattened to help you easily hold and control the Vape Tool with your fingertips. Best of all, we sell the Sneaky Pete Vape Tool in a five-pack, so you can keep a few around the house and have extras for backup.
The pack contains 10 x Ditanium Glass Handpiece Screens to replace the screen in your vaporizer's handpiece. These are the exact same screens that your vaporizer includes so they will provide a perfect fit for your handpiece.
The Restrictor Discs are a game-changer for the Sticky Brick lineup! These 316 Stainless Steel discs sit between your flame and your herb in your Brick. They put your Sticky Brick on "Easy Mode", enabling you to learn the proper technique while greatly reducing the possibility of scorching your herb. They serve to reduce the direct heat that can come into contact with your flower to scorch it, and allow you to hold your flame much closer to your intake, or even to use a larger flame. If you've ever struggled trying to use a Sticky Brick, or want to experiment with a larger torch, or just want a more straightforward experience, I highly recommend these!
This stainless steel herb funnel makes filling your favorite vaporizer simple and tidy. Place the funnel into the top of the chamber and gently pour your herb in. It helps to eliminate the mess and inconvenience that can take place when pouring directly from the grinder into a vaporizer. Works best with finely ground materials, but will also work with a more coarse blend.
This handy accessory allows you to pre-load capsules for your Crafty, Mighty, Plenty, or Volcano! Pre-loaded capsules are super convenient, and a clean and easy way to take multiple bowls with you on the road. Simply open up your vaporizer, toss a capsule in the bowl, and away you go! The Capsule Caddy will hook to your keychain for easy travel, and the container itself is leak and odour proof. A very affordable accessory that adds convenience and function to your Storz & Bickel vaporizer.
- Capsule caddy is odor, crush and leak proof- Pre-loaded capsules are convenient and easy to use- Makes loading a fresh bowl on the go simple and mess-free- Includes Capsule Caddy and 4 x Capsules
The Mighty Vaporizer Stand is a perfect way to enhance your Mighty experience! It allows full access to all functions and buttons on the Mighty while it's in the stand, meaning you can charge and change temperatures while your Mighty sits happily upright on your desk. The stand is made from a hard and durable polycarbonate that will last for years while not scratching your Mighty.
With the Mighty in a vertical position, viewing the screen and changing temperatures is much easier, it's the stand that the Mighty should have included! Once you put it onto your device you will leave it on!
Key Features:
- Designed specifically for the Mighty by Storz & Bickel- Charge & change temperatures while in the stand- Your Mighty will stand securely in place on a desk or table- A must-have accessory for any Mighty owner!- Secure fit
