All Clean Everything with Pipe Plugs
The next few days after we clean our glass, it’s common to notice that residual isopropyl smell. That smell isn’t coming from your glass, it’s on your fingers, from plugging the holes on your water piece while you shake it. The Pipe Plug completely erases the issue in the simplest of ways, and the results are a cleaner glass piece and normal smelling thumbs. Count us in!
A Tight Seal in Two Colours
Pipe Plugs are made from either black or green silicone and are designed to seal the joints on your water piece to facilitate a more thoroughly sealed ISO shake. Even with your thumbs, some alcohol will leak out and if you don’t use any stopper at all, you’re about to make a sensational mess.
Easy to Use and Multi-Sized
Super simple to use, just 'screw' the Plug into your intake joint or mouthpiece and that’s it. We recommend giving it a less vigorous shake to start, just to make sure the Plug is in nice and tight. If you’re using a 14mm joint, make sure the pointy end of the Pipe Plug is point up, and the result will be a super tight seal. If you have a 10mm or 18mm joint, place the Plug pointy end down and then 'screw' it in place, tightly, until you have a proper seal.
When shaking liquid in any water piece, we recommend doing it over a sink and again, testing the seal before you get vigorous, just to be on the safe side. When you have the proper seal, you’ll be able to give it a good, proper shake, needling less ISO than you’re used to using.
Pipe Plugs Make Glass Cleaning Easy
The Pipe Plugs are not recommended to be used with male joints, but with females, they are the best way to plug the openings on your water piece. This is a much easier and more thorough way to clean your favourite water pipe.
