Age verification
Please confirm that you are 19 years or older to enter the shop.
Have patience...
You are not old enough to visit the shop yet.
If the Arizer Air 2 or Solo 2 are part of your vape game, well, here's a game changer! The BubbleMax gives you the cooling of a large water-piece in a compact package, delivering cool hits through your Arizer vape. The difference in performance after adding the BubbleMax is dramatic, while maintaining the discrete and portable attributes of Arizer vapes. Standing 6" tall with a tube percolator boasting four slits for additional bubbling, the BubbleMax gives you an easy draw from a mouthpiece canted to a comfortable position, all through pure glass, tip to tip. We designed and built both variants of the BubbleMax here at Sneaky Pete Vaporizers to fit perfectly with the Multi-Stand, and it's an addition we're thrilled to share with you. Get the cooling you'd expect from a stand-alone water-piece and change your game. Get the BubbleMax; it's cool. - Compatible with the Arizer Air MAX, Solo 2, Air SE and Air 2- Numerous slits on percolator provide cooler temperature hits- Ultimate purity from all glass production with a permanent filter - Portable and discrete, but highly effective- Designed to be a significant improvement over the stock experience- We love this one!- Never leave a water piece unattended on your vape, remove between uses
$34.99$15.99
The LittleFinger Adapter is the easiest, cleanest, and most convenient way to use any DynaVap tip with a waterpiece. With its universal 10, 14, or 18mm male joint, the LittleFinger truly does adapt to whatever your needs are. Two wide glass bands provide extra durability while also allowing you to set the unit down when it's hot, as it holds the tip suspended in the air rather than laying it on the table. Plus, it's enjoyable to watch the vapor travel through the glass. Fun, versatile, and super convenient. Get cooling hydration combined with the purity of glass with the LittleFinger Adapter.
$22.99$10.99
Connect a whip to any 10, 14, or 18mm female waterpiece with the Universal Whip Adapter. The multi-sized glass connector provides greater compatibility than our standard whip adapter. With its 8.1mm whip connector it can be used with a Volcano Hybrid, Arizer Extreme Q, and many more setups. Ready to whip it good? Get the Universal Whip Adapter.
$15.99$8.99
Must-Have MiniNail Accessory Get the perfect heating setup with MiniNail's Gen 2 Heater Coil Stand. Designed to hold your Quartz Banger, Hybrid Nail or Heater Coil securely so you can elevate your dabbing experience, while keeping things safe. Crafted from high-grade polished stainless steel and available in a beautiful gold finish, the MiniNail Heater Coil Stand also features a slot for storing useful accessory tools like dabbers close to the action, this stand is an essential companion of any MiniNail eNail set up. Store Your MiniNail Safely Storing your hot MiniNail on a stand like this is preferable for many users as compared to leaving a hot MiniNail on their favourite water piece, and this is the perfect place to store your MiniNail setup with your most used accessories right where you need them. The Coil Stand is priced right and will soon find a permanent place in your setup.
$28.99$16.99
Handmade in California from high quality German Schott glass, the MiniNail Glass Shovel Dabber is perfectly designed for scooping concentrates. Precision cut with a shaped shovel style dabber tip, it measures 3 1/2" in length, and can easily scoop materials that other dabbers struggle with. It will smoothly fit all the way to the base of any MiniNail type: Quartz Hybrid Nail, Titanium Nail, Quartz Hybrid DeepDish Nail, or Quartz e-bangers.
$39.99$25.99
Use 10mm Vapes with 14mm Glass Simply Bring harmony to your vape setup with this versatile adapter. This low profile adapter is the super easy way to turn your 14mm female joint into a 10mm female. It allows you to hook up your favorite 14mm female water piece to a 2020 DynaVap M, or any other 10mm male vaporizer or accessory, and you're all set. This low profile adapter will not add any height, is barely noticeable, and fits snugly. Bring flexibility to your vaping rig: Adapt!
$11.99$6.99
This bowl will fit into 14mm female joints. Three grips make it easy to use for the biggest hits!
$5.99$2.99
Our XL Clear Terp Pearls are made of 100% pure quartz and they’re 6mm diameter instead of the traditional 4mm size. That may not sound like a huge difference, but it more than doubles the pearl’s surface area and triples its volume, so the pearl stays hot much, much, much, much longer (quadruple much-es!). Put a couple inside the bucket before heating and use the airflow from one of our carb caps to push them around in your oil. Hot pearls efficiently vaporize the oil as they roll, so they're perfect for taking huge slabs or micro-dabbing. Key Features: - Pure quartz- 6mm diameter- Comes in pack of 5- Adds XL efficiency and fun
$6.99$0.99
This Sidestep Adapter is sized 14mm with a male joint at one end and a female joint at the other. There isn’t much vertical difference between the joints, but it moves the connection about 3.5” off to the side of the Mega Globe, so now your vapes and bangers won’t sit directly on your rig itself. Sidesteps are handy to catch debris and reclaim, keeping your water piece cleaner. You’ll also protect your Mega Globe (or another piece, it fits any 14mm rig) from being in direct contact with vapes or hot bangers. Keep your investment safe and save time on maintenance with our Sidestep Adapter for the Mega Globe.
$16.99$4.99
This base piece fits on the bottom of your Pocket Micro Torch, giving it a wide and stable footing so it stands upright. While this torch is definitely one of the best available, many have said they want a way to keep it standing up when not in use. This add-on is a quick and affordable upgrade to do just that!
$7.99$2.99
These are official Healthy Rips replacement O-ring/Stainless-Steel Screen sets made to fit the Fury Edge SE or the Rogue SE. They come in a set of two and are perfect replacements if you've lost yours or just want some backups.
$13.99$9.99
The Sneaky Pete Master Adapter™ fits almost all vaporizers to any water tool with a female joint. The adapter itself is two separate individual accessories that perfectly fit together. The smaller piece goes neatly within the larger piece so it's all one very convenient package less than 1.5" tall. The smaller adapter has a gradual inner taper for more narrow round tips, while the larger adapter has distinct cutouts for specific vapes. Together, they fit your bong to any cartridge and all DynaVap stems and bodies. They also adapt for the Arizer Solo2, Air2 and ArGo, the Flowermate V-5 Nano, the DaVinci IQ, the RBT Splinters, the E-Nano… Pretty much any vape with a round mouthpiece works with this accessory thanks to its innovative design and silicone flexibility. The Master Adapter covers more vapes than any other adapter on the market. Key Features: - 100% silicone, durable and shape-able- For 10mm, 14mm and 18mm female joints- Works with more vapes than any other adapter- The most affordable way to adapt the most vapes for water use
$13.99$0.99
The Sneaky Pete Vape Tool is a 3" long stainless-steel multi-tool that’s great for loading extracts, stirring a bowl, scraping gunk off your vape or glass piece, and all kinds of other handy tasks. One end is rounded, curved and scooped so you can get herb out of corners and clean in small spaces, and the middle grip is flattened to help you easily hold and control the Vape Tool with your fingertips. Best of all, we sell the Sneaky Pete Vape Tool in a five-pack, so you can keep a few around the house and have extras for backup.
$3.49$0.49
These adapters will allow you to use any two 14mm female joints together. The adapters are sturdy and approximately 2.5" tall, and will work with your favorite water piece and vaporizer adapter.
$11.99$6.99
The Strong-Arm DynaVap Adapter will allow you to use your DynaVap Tip directly with a water pipe! Simply place a DynaVap Tip into the Strong-Arm and you're ready to hit your DynaVap through a 10mm, 14mm, or 18mm female water pipe. This is the easiest and most convenient way to use your DynaVap through a water pipe, and your vapour will touch nothing but the purity of glass. Key features: - Works with 10mm, 14mm, or 18mm female water pipes- Enhanced tighter fit- Approximately 3" in length
$20.99$11.99
The Hula Stem V2 pairs with a stainless steel or titanium DynaVap tip to add cooling and the purity of glass to your DynaVap experience. Simply place any DynaVap tip onto the Hula Stem and heat like normal. The stem will help to cool down your vapour with its indentations that add surface area to the vapor pathway. By replacing your current DynaVap body with a glass Hula Stem V2, you are creating an incredibly pure vapor path, many people prefer glass, even over the higher-end metals like titanium. ** DynaVap Tip NOT included. Key features: - Indentations add surface area and help to cool vapor - Enhanced tighter fit- Add the purity of glass to the DynaVap- 2.5" total length- Available in seven different color options
$12.99$1.99
The pack contains 10 x Ditanium Glass Handpiece Screens to replace the screen in your vaporizer's handpiece. These are the exact same screens that your vaporizer includes so they will provide a perfect fit for your handpiece.
$11.99$1.99
The Restrictor Discs are a game-changer for the Sticky Brick lineup! These 316 Stainless Steel discs sit between your flame and your herb in your Brick. They put your Sticky Brick on "Easy Mode", enabling you to learn the proper technique while greatly reducing the possibility of scorching your herb. They serve to reduce the direct heat that can come into contact with your flower to scorch it, and allow you to hold your flame much closer to your intake, or even to use a larger flame. If you've ever struggled trying to use a Sticky Brick, or want to experiment with a larger torch, or just want a more straightforward experience, I highly recommend these!
$10.97$1.99
**Do not over-tighten the adapter onto your vaporizer! It only needs a slight/eighth turn, over-tightening will damage your vaporizer.** This water pipe adapter is designed to fit Crafty and Mighty vaporizers to take your vaping to the next level. Plumb in a water pipe to your vape set-up for cooler vapour, concentrating it through percolation for larger and cloudier hits. The adapter comes in 14mm and 18mm male vaporizer joint variations, and connects universally to 10mm, 14mm, and 18mm female water pieces. Easy to install, simply remove the cooling unit on your vaporizer, then line up the slots on the adapter with the holes on your device. Very slightly twist the adapter to secure it; an eighth turn will make it completely secure. Be sure not to twist the adapter too much! Over-tightening will damage your vaporizer. Once the adapter is secured, attach your modified vaporizer to your water pipe of choice and enjoy fresh water hits. Highly recommended for Crafty and Mighty users for a superior vape experience. Key Features: - Compatible with Crafty, Crafty+, Mighty, or Mighty+ vaporizers- Durable plastic housing contains borosilicate glass for a pure vapor path- Replaceable screen included- Easy to assemble - Available with a 14mm or 18mm male vaporizer joint- Universally adapts to 10mm, 14mm, and 18mm female water pieces
$23.99$6.99
Cool Down Your Arizer Vaporizer The Arizer 3D Flow Stem features visually striking and functional divots throughout the length of the stem to increase the surface area your vapor passes over. The increased surface area allows for more cooling of the vapor, resulting in a smoother draw. The divots do not restrict the airflow in any way, and the stems provide a clear draw for large and cool hits. Key Features: - Compatible with the Arizer Solo, Solo 2, and Air 2, Air MAX, Solo 2 MAX- The increased surface area provided by the divots reduces the vapor temperature- Great airflow- Easy to clean- Divots are visually striking- Durable glass construction
$23.99$13.99
The Best Way To Store Your Cannabis The Jyarz line of storage units is absolutely top notch and satisfies all the components you’re looking for in flower storage. Keeping your product properly stored is paramount in ensuring vapour quality as UV light and moisture loss can result in damaged trichomes and less overall active material in your bud. Jyarz feature a three-layer solution to storage they call TripleBlock. The core layer is a borosilicate glass container that is surrounded in an exterior non-BPA plastic sleeve made entirely from recycled milk jug plastic. This provides the protection from light and elements necessary to keep your bud fresh. Each Jyarz is rimmed with two Foodsafe latex gaskets that won’t add any taste to your flower and finally a top that screws in place to create an airtight seal. The Classic is one of the most popular choices for those who are looking for a Jyarz to satisfy a day’s out worth of sessions. Easy to fit in your pocket, the Classic will hold about 3g of flower without having to force it at all. Jyarz are the ideal solution to flower storage as they keep it protected from UV, are airtight, and stored in materials that will never add odour to your flower. Ensure you’re getting the best out of your bud by storing it in Jyarz.
$24.99$13.99
The Honest Butane Torch Lighter is a great solution for use with all Sticky Brick and DynaVap products (as well as many others!). The torch features a dust cover connected with a chain, and is ignited by simply pressing down the button on top. Be sure to use at least triple-refined butane for best results and lighter longevity. Due to postal laws we are unable to ship torches prefilled.
$11.99$8.99
This stainless steel herb funnel makes filling your favorite vaporizer simple and tidy. Place the funnel into the top of the chamber and gently pour your herb in. It helps to eliminate the mess and inconvenience that can take place when pouring directly from the grinder into a vaporizer. Works best with finely ground materials, but will also work with a more coarse blend.
$5.49$2.49
This Storz & Bickel magazine is a handy accessory to preload capsules for your Crafty, Mighty, Plenty, or Volcano. Preloaded capsules are super convenient; a clean and easy way to take multiple bowls on the road. Simply open up your vaporizer, toss a capsule in the bowl, and away you go! The Magazine holds 8 preloaded dosing capsules, allowing for a ton of on-the-go use without having to reload. An affordable accessory that adds convenience and function to your Storz & Bickel vaporizer. Key Features: - Magazine will hold a full 8 Dosing Capsules- Preloaded capsules are convenient and easy to use- Makes loading a fresh bowl on the go simple and mess-free- Includes Magazine and 8 x Dosing Capsules
$17.99$9.99
Please confirm that you are 19 years or older to enter the shop.
You are not old enough to visit the shop yet.