All Glass Accessories

Connect a whip to any 10, 14, or 18mm female waterpiece with the Universal Whip Adapter. The multi-sized glass connector provides greater compatibility than our standard whip adapter. With its 8.1mm whip connector it can be used with a Volcano Hybrid, Arizer Extreme Q, and many more setups. Ready to whip it good? Get the Universal Whip Adapter.

Read more less

Complete your V.A.S. (Vaporizer Accessory Stand) with a Round Top or Flat Top Glass Stopper. Made from borosilicate glass, the Glass Stopper allows you to fill the reservoir arm with isopropyl alcohol and will prevent the alcohol from evaporating. Isopropyl alcohol is the ultimate cleaning solution for all of your vapes and accessories, so keep it close at hand at all times. Vape enthusiasts know the V.A.S. is the perfect accessory for all of your desktop organizational needs, and the Glass Stopper will give even more utility to your setup.

Read more less

This bowl will fit into 14mm female joints. Three grips make it easy to use for the biggest hits!

Read more less

This Sidestep Adapter is sized 14mm with a male joint at one end and a female joint at the other. There isn’t much vertical difference between the joints, but it moves the connection about 3.5” off to the side of the Mega Globe, so now your vapes and bangers won’t sit directly on your rig itself. Sidesteps are handy to catch debris and reclaim, keeping your water piece cleaner. You’ll also protect your Mega Globe (or another piece, it fits any 14mm rig) from being in direct contact with vapes or hot bangers. Keep your investment safe and save time on maintenance with our Sidestep Adapter for the Mega Globe.

Read more less

This is a replacement whip for the Mega Globe, or any water piece with a 14mm female fitting. This is a full replacement whip including the glass mouthpiece, 1 foot tubing, and either a 14mm 90 degree male adapter, or a 3-in-1 universal adapter. If you break a component of your whip, or if the silicone is getting a little funky, a replacement whip is an inexpensive way to get that brand new feeling back.

Read more less

These adapters will allow you to use any two 14mm female joints together.  The adapters are sturdy and approximately 2.5" tall, and will work with your favorite water piece and vaporizer adapter.

Read more less

The Strong-Arm DynaVap Adapter will allow you to use your DynaVap Tip directly with a water pipe! Simply place a DynaVap Tip into the Strong-Arm and you're ready to hit your DynaVap through a 10mm, 14mm, or 18mm female water pipe. This is the easiest and most convenient way to use your DynaVap through a water pipe, and your vapour will touch nothing but the purity of glass. Key features: - Works with 10mm, 14mm, or 18mm female water pipes- Enhanced tighter fit- Approximately 3" in length  

Read more less

These Glass Syringes are the perfect way to fill a TH2 Cartridge or to dispense your concentrate! The Syringe is made from glass and features a Luer Lock to keep the syringe contents fresh. The Short Blunt Tip Needle attaches to the Syringe for easy and mess-free filling or dispensing of your favorite concentrate. The Syringe includes graduated markings so you can carefully control how much you fill, and comes in a convenient plastic case with a magnetic clasp.

Read more less

**Do not over-tighten the adapter onto your vaporizer! It only needs a slight/eighth turn, over-tightening will damage your vaporizer.** This water pipe adapter is designed to fit Crafty and Mighty vaporizers to take your vaping to the next level. Plumb in a water pipe to your vape set-up for cooler vapour, concentrating it through percolation for larger and cloudier hits. The adapter comes in 14mm and 18mm male vaporizer joint variations, and connects universally to 10mm, 14mm, and 18mm female water pieces. Easy to install, simply remove the cooling unit on your vaporizer, then line up the slots on the adapter with the holes on your device. Very slightly twist the adapter to secure it; an eighth turn will make it completely secure. Be sure not to twist the adapter too much! Over-tightening will damage your vaporizer. Once the adapter is secured, attach your modified vaporizer to your water pipe of choice and enjoy fresh water hits. Highly recommended for Crafty and Mighty users for a superior vape experience.  Key Features: - Compatible with Crafty, Crafty+, Mighty, or Mighty+ vaporizers- Durable plastic housing contains borosilicate glass for a pure vapor path- Replaceable screen included- Easy to assemble - Available with a 14mm or 18mm male vaporizer joint- Universally adapts to 10mm, 14mm, and 18mm female water pieces

Read more less

Cool Down Your Arizer Vaporizer The Arizer 3D Flow Stem features visually striking and functional divots throughout the length of the stem to increase the surface area your vapor passes over. The increased surface area allows for more cooling of the vapor, resulting in a smoother draw. The divots do not restrict the airflow in any way, and the stems provide a clear draw for large and cool hits. Key Features: - Compatible with the Arizer Solo, Solo 2, and Air 2, Air MAX, Solo 2 MAX- The increased surface area provided by the divots reduces the vapor temperature- Great airflow- Easy to clean- Divots are visually striking- Durable glass construction

Read more less

Adapters are Cheaper Than New Glass These adapters will allow you to use two male joints together.  The adapters are sturdy and approximately 2.5" tall, and will work with your favorite water piece and vaporizer adapter.   Two Sizes Fit Your Needs To attach two 14mm male pieces, select the 14mm Female to 14mm Female Adapter. To attach one 14mm male and one 18mm male piece, select the 14mm Female to 18mm Female Adapter.

Read more less