A Mighty Performer, the Mighty+ Bead Stem
Many of our favourite devices come equipped by default with a relatively short output that does very little to substantially impact the cooling of the vapour that’s created, resulting in unwanted coughs and unnecessary sore throats. Ideally, you’re going to want to run your rig through water for the best cooling, but if you’re out and about, that’s rarely an option. The Mighty+ Bead Stem is an incredibly effective cooling stem that will work with several of the most popular and powerful devices available. Let’s dig into what makes the Mighty+ Bead Stem so great.
Familiar Technology Executes Impressively for Better Cooling
By now, most of us are familiar with ball vapes, but for those who aren’t, essentially your flower is vaporized by a wand that’s head is full of quartz balls heated by an electric coil. With the Bead Stem, we went in the exact opposite direction; the quartz beads in the stem act to pull heat from your vapour to provide a more enjoyable session. Those balls are on the larger side and are effective at drawing a tonne of heat out of your vapour while providing less airflow restriction than the smaller balls you’ll find in other stems.
A Lateral Evolution of the Rocket Stem
Speaking of the Rocket Stem, the Bead Stem has a thinner profile making it easier to take on the go. You can also remove the beads in the Bead Stem, making it even easier to clean than the Rocket Stem. The Bead Stem has a two-piece glass section, one section that holds the quartz balls in place and the second part that connects to the stem through a gasket connection. This choice for a two-piece construction allows for the easiest maintenance and maximum airflow possible.
Effective, Compacted and Ready to Take with You
The Mighty+ Bead Stem is compatible with the Mighty, Mighty+, Crafty, and Crafty+, bringing you the versatility you desire from a cooling stem. Like our popular Rocket Stems, this Bead Stem attaches to your device with a silicone connector. The Mighty+ Bead Stem is a highly efficient, compact stem that will definitely outperform the standard dry cooling unit that your device was shipped with.
Cool Down Your VENTY with the VENTY Bead Stem
Many of our favourite devices come equipped by default with a relatively short output that does very little to substantially impact the cooling of the vapour that’s created, resulting in unwanted coughs and unnecessary sore throats. Ideally, you’re going to want to run your rig through water for the best cooling, but if you’re out and about, that’s rarely an option. The VENTY Bead Stem is an incredibly effective cooling stem that will work with several of the most popular and powerful devices available. Let’s dig into what makes the VENTY Bead Stem so great.
Familiar Technology Executes Impressively for Better Cooling
By now, most of us are familiar with ball vapes, but for those who aren’t, essentially your flower is vaporized by a wand that’s head is full of quartz balls heated by an electric coil. With the VENTY Bead Stem, we went in the exact opposite direction; the quartz beads in the stem act to pull heat from your vapour to provide a more enjoyable session. These balls are on the larger side and are effective at drawing a tonne of heat out of your vapour while providing less airflow restriction than the smaller balls you’ll find in other stems.
A Lateral Evolution of the Rocket Stem
Speaking of the Rocket Stem, the Bead Stem has a thinner profile making it easier to take on the go. You can also remove the beads in the Bead Stem, making it even easier to clean than the Rocket Stem. The Bead Stem has a two-piece glass section, one section that holds the quartz balls in place and the second part that connects to the stem through a gasket connection. This choice for a two-piece construction allows for the easiest maintenance and maximum airflow possible.
Effective, Compacted and Ready to Take with You
Like our popular Rocket Stems, the VENTY Bead Stem attaches to your device with a silicone connector. The VENTY Bead Stem is a highly efficient, compact stem that will definitely outperform the standard cooling unit that your device was shipped with.
The Hand Globe: Your Portable Space Companion
Imagine a water piece that's as versatile as it is portable. The Hand Globe is a handheld marvel that brings the cosmos of convenience to your fingertips. Whether you're exploring the vastness of your backyard or the comfort of your couch, The Hand Globe is your go-to piece for seamless vaping on the go.
Designed for the Voyager in You
Unlike other pieces that are confined to your desktop, The Hand Globe is made to move. Hold it, take it anywhere you want, and enjoy the freedom to vape wherever your adventures take you. It's compact yet mighty, ensuring that your sessions are always out of this world.
Serious Compatibility
Equipped with an internal 14mm joint, The Hand Globe is compatible with the majority of vaporizers and water pipe adapters. No more fussing over fit – just plug in and launch into your session.
Zero Gravity Airflow
Experience unrestricted airflow with The Hand Globe's wide-open design. No draw resistance means smoother hits and a more enjoyable vaping experience. It's like floating in zero gravity – effortless and exhilarating.
Galactic Filtration
The Hand Globe features a 3-hole percolator, offering that classic chug and superior filtration. It holds a generous water capacity, perfect for high-temperature sessions. The low-placed percolator allows you to adjust the water level to your preference, making it adaptable for every star-studded adventure.
Ergonomic Excellence
The built-in mouthpiece with a flat end ensures a comfortable lip feel, enhancing your overall experience. Plus, the angled percolator and joint keep your vape away from your face, providing a safer and more enjoyable session.
Perfect for Spacewalks and Couch Cruises
The Hand Globe is an excellent choice for those who prefer to use their bongs in hand. Whether you're on a spacewalk through your backyard or cruising on your couch, this handheld water piece is designed to be your trusty companion.
The High Rise Water Pipe System is a Huge Step Up
We’re movin’ on up, to the green side, in the sneakiest apartment in the sky-ighhh. From the innovative original creators of the Globe and Cube series, we’re here to ask if you’re ready to move up even higher in the haze to a skyscraper? If so, the incredibly high performing and pioneering High Rise Water Pipe System is ready for occupation.
An Impressive Water Pipe Holds Lots or a Little
Made from several components, the meat of the High Rise System starts with the water pipe, and it’s a considerable unit. With a wide base and massive reservoir, you’ll be able to fill it with enough water to cool down the hottest hits while being stable on the table. The High Rise features a high volume, ultra-bubbling, wide diameter percolator that both sits close to the bottom of the piece and is bolstered to it for additional strength. This low position lets you fill the water pipe with a small amount of water and still get some cooling which can be advantageous and provide the best flavour.
Whip it Good and Share with Your Friends
The glass piece has a 14mm input that is bolstered to the side of the unit for extra strength and on the top, you’ll find a second 14mm joint which is purposed for the included silicone whip. The High Rise is a true desktop centrepiece that you’ll want to share and show off as well.
Staying in the vein of being impressed by the High Rise, the glass is the least interesting part! Where the real magic happens is in the “scaffolding”, the non-glass components that surround the High Rise and provide it with the unique abilities that it brings to the party. The bottom section of the scaffolding is a precision, 3D printed base with a small rubber pad in the centre where the glass sits.
A Sturdy Scaffolding Protects the Glass
There are 4 metal posts that screw into the base and will then secure the top metal section that sits directly on the glass in place. Once again, there’s a rubber pad where the glass would contact the other surface for peace of mind and safety. Now that the High Rise is assembled, you will see how substantial of a structure it really is, with enough mass to stand reliably regardless of what device you’re using it with. Finally, for those of us who are always misplacing our tools, the High Rise has a built-in swing arm that is pitted with different sized holes to support your extra bowls, adapters, and tools of various sizes.
Light it Up While You Get Lit Up
But what’s that? Off the top rope (or under the base) with the coupe de grace there’s a controllable, colour changing LED light disc that will light up your High Rise in a multitude of colours. You can choose to have one colour displayed, or the light can cycle through the available colours in order, it’s totally up to you! Battery shipping laws are weird, so the included remote comes with the battery installed, but the light is powered by 3 x AAA batteries that you’ll have to supply on your own.
The High Rise is a special piece that brings both an impressive water pipe, a securely fastened protective cage, a tool organizer and a light show. We’re talking about high-end features in an extremely affordably priced rig that provide a significant step up from using a standard glass piece.
Find out even more about the High Rise here.
The new Puffco Peak is the evolution of the world’s most popular e-rig — redesigned from the ground up to make dabbing simpler, smoother, and more consistent. With 3D heating technology, an improved Joystick Cap, and real-time temperature control, it delivers effortless sessions and flawless flavour every time.
Sorry, your browser doesn’t support embedded videos.
New Puffco Peak — next-generation performance in a compact, refined form.
Quick take: If you want an easy, reliable e-rig with strong flavour and minimal setup friction, the New Puffco Peak is one of the best options in this price tier.
Simple workflow: quick setup and low-maintenance daily use.
Consistent results: 3D heating + real-time temp control keeps sessions steady.
Best fit for: users who want performance without a steep learning curve.
Buy with confidence: ships from Canada, support if you need help, and Sezzle financing at no extra cost to you.
For a noticeable upgrade over stock glass, pair it with the Peaker Recycler for New Puffco Peak.
Effortless Performance, Elevated Experience
The new Puffco Peak combines cutting-edge heating technology with intuitive design to deliver premium concentrate sessions without the learning curve. It features the latest 3D Chamber for even heating, a redesigned Joystick Cap for optimal airflow, and real-time heat monitoring that keeps every dab perfectly controlled from start to finish.
3D Chamber & Joystick Cap: Power Meets Precision
3D Chamber: Heats from the sides and bottom simultaneously for more even vaporization, richer flavour, and smoother hits.
Joystick Cap: Maximizes airflow and concentrate movement for denser vapour and superior extraction efficiency.
Smart Temperature Control
Advanced internal sensors actively adjust power to maintain precise heat throughout your session. Whether you’re after low-temp terpene flavour or high-temp potency, the Peak automatically keeps temperatures stable for perfect results every time.
Fast Charging & Long Battery Life
Up to 35 dabs per charge — impressive battery endurance for an e-rig this size.
USB-C to USB-C charging for fast, reliable recharges.
LED battery indicator provides instant power feedback at a glance.
Compatible with Peak & Peak Pro Glass
Customizing your setup is easy. The new Puffco Peak works with all Peak and Peak Pro glass attachments, giving you access to countless glass and cooling options.
What’s Included
Puffco Peak Base
Peak Glass 2.0
Peak 3D Chamber
Joystick Cap
USB-C Charging Cable
Loading Tool
Cotton Swabs
Quick Start Guide
Frequently Asked Questions
What’s new compared to the original Puffco Peak?
The new Peak adds the 3D Chamber for superior efficiency and flavour, a Joystick Cap for better airflow, faster USB-C charging, and a lower price — all while keeping Puffco’s signature ease of use.
How long does the battery last?
Expect up to 35 sessions per charge depending on your heat level and session length. The LED battery indicator shows remaining power clearly.
Can I use my old Peak or Peak Pro glass?
Yes — all previous Puffco Peak and Peak Pro glass tops fit perfectly.
Is it easier to use than before?
Absolutely. Real-time temperature control and redesigned ergonomics make this the most effortless Peak yet — ideal for both new and experienced dabbers.
What’s the warranty?
Every unit includes a 2-year manufacturer warranty from Puffco covering materials and workmanship.
Final Thoughts
The new Puffco Peak streamlines the dabbing experience with faster heat-up, smarter control, and smoother airflow. Whether you’re upgrading from an older Peak or starting fresh, this version offers the perfect blend of convenience, design, and cutting-edge performance.
Read our full review of the New Puffco Peak here.
You Needed it, We Did It
The poet laureate of Canada, Avril Lavigne, once pined, “why you gonna make things so complicated?” Well, keeping it simple is great and it has its place, and we visit that place often, but sometimes you just want to amp it up. Gear upon gear upon gear. Hell, we make a four-man water piece, you know we like to bring it now and then. Take the leap with us into the absolutely unique Pass-Through Micro Bubbler.
A Bong for Your Bong
The ingenuity of the PTMB starts with a 14mm intake that feeds into a micro bubbler from your main glass piece’s intake. Then attached to the side of the micro bubbler, there is another 10mm joint and there’s a matching glass stopper you can utilize with that joint like you would with any carb, but it will serve the function of not just emptying the micro bubbler, but your glass piece as well.
Measure Twice, Buy Once
While this is an incredible system, it will not work with all shapes and sizes, so make sure that your piece will fit before you go down that road. Or buy another piece that will fit, we’re not here to tell you what to do. Also, make sure the piece you’re connecting it to has some heft, as this PTMB has some weight to it as well and you don’t want the castle to come crumbling down.
Double the Fun
The Pass-Through Micro Bubbler is like putting another gun on your gun, a knife on your knife, a guitar on your guitar; you might think twice, but you’ll be glad that you did it. You’ll definitely look as cool as Jimmy Page while using the PTMB, that we can guarantee. Use it as a carb, extra hydration or just to look cool, just use it.
Combustion Enthusiast's Dream
Unlike most of our pipes, The Sparrow Pipe is crafted specifically for those who savour the traditional art of combustion. It's a perfect blend of elegance and functionality, designed to elevate your smoking experience.
Also Available in 14mm
The Sparrow also comes in a 14mm version, perfect for use with your favourite vaporizer.
Sturdy and Stylish Design
Standing at a total height of 5.5”, The Sparrow Pipe is both compact and stylish. Its 3” flat bottom ensures stability on any surface, so you can enjoy your session without any wobbling.
Generous Bowl Capacity
The Sparrow Pipe features a generously sized bowl, allowing you to pack a significant amount of flower per load. However, you're in control – you don’t have to fill it entirely every time. The built-in bowl design means you don't have to worry about breaking or losing a separate bowl.
Innovative Ash Control
The bowl's smaller neck helps keep ash out of the pipe's body, maintaining a cleaner smoking experience. This feature, combined with the mini stereo matrix percolator, enhances airflow and bubbling for a smoother draw.
Elegant Mouthpiece
The built-in mouthpiece is both practical and elegant, fitting comfortably in your mouth with a lip guard to ensure perfect positioning. At 3.5” long, it keeps your face away from the flame while lighting.
Make The Sparrow Sing
Make The Sparrow Pipe sing with your favourite flower. We particularly enjoy it with cannabis. The Sparrow Pipe is more than just a smoking accessory; it's a statement piece for those who appreciate quality and design.
---
Key Features:
- Height: 5.5”
- Stable Base: 3” flat bottom
- Generous Bowl: Large enough for significant flower packing
- Built-in Bowl: No separate pieces to break
- Ash Control: Smaller neck to prevent ash build-up
- Percolator: Mini stereo matrix for enhanced airflow and bubbling
- Mouthpiece: 3.5” long with lip guard for comfort and safety
Experience the superior design and performance of The Sparrow Pipe, where tradition meets innovation in every puff.
Clean Your Rig the Easy Way, All in One Place
Everyone is always talking about their new bong this and their new vape that, but where’s all the parlay about the true hero of the vape world, cotton swabs dipped in isopropyl alcohol? Well, the concept is easy enough, but we wanted to take it to a place where cleaning was… cleaner. The Mop Bucket Cleaning Station is the perfect way to save your ISO between uses while storing your swabs together, in one package.
A Spot for Your Wets and Your Dries
The Mop Bucket Cleaning Station is conceived of two sections, the base that you’ll fill with ISO and the upper section that will hold your swabs. The lower section has two joints that can be easily capped by the included glass stoppers in order to help preserve your expensive ISO. No muss, no fuss, all simplicity and efficiency.
Clean Gear = Tasty Weed
Keeping your equipment clean isn’t only integral to its longevity, it’s also a major part of being able to enjoy your cannabis in premier settings; a clean rig leads to cleaner hits, and they tend to taste the best. Make cleaning easy and keep it all in one place with the Mop Bucket Cleaning Station.
A Powerful Stainless Steel Tip
The M 7 Stainless Steel Tip is designed for those seeking bigger rips and enhanced control. Its chamber and bowl, with increased mass, ensure excellent heat retention, perfect for one-hit extractions. Featuring a Finless Tip design, it reduces heat transfer to the stem by up to 20%, keeping fingers and your stem cool.
Bigger Hits With More Control
This innovative tip promotes even extraction by evenly distributing mass in the tip and chamber walls, which helps to avoid scorching and hot spots. The Captive Cap fitment boosts airflow, making each hit smoother and more enjoyable.
Microdose Ready With Adjust-A-Bowl
For those who prefer microdosing, the M 7 Tip includes the popular "adjust-a-bowl" feature that allows the chamber and bowl size to be reduced by half - and it's easier than ever to get your CCD in place.
The Super Sub Pipe: More Capable than Most Navies
Interesting bit of Canadian history: at one point in the late 80s, the West Edmonton Mall, at the time the largest mall in the world, had more nuclear submarines than the entire Canadian Navy. We may not have as many submarine themed devices as an entire country, even Canada, but we are happy to add another one to our fleet, the Super Sub Pipe. This cavernous water piece will have you exploring the depths of your couch with a pipe that is designed to make the chamber easy to empty without removing your vaporizer.
A Built in Pass-Through You Say?
Think of the Super Sub as a reworked, restructured version of our Submarine Pipe with one game changing addition: an additional, multipurpose joint. Essentially, the primary use for this joint is as a built-in, pass-through for your water pipe. This makes the chamber easy to empty and as it’s huge, you’ll be able to fill the Super Sub all the way to capacity with vapour and enjoy it all in one toke.
Leave Your Vape in for the Entire Session
With this built-in ability to clear the chamber, you do not need to remove your vaporizer during your session. We’ve prioritized the business end of the experience, but the operational elements of the pipe are just exceptional. Just drop your vape into the 14mm joint for the entirety of your session and use the included glass plug as a shotgun to exercise your lungs. This is both safer and easier than having to remove your vape each time you want to empty your piece, and everyone loves that.
Stable, Large and an Impressive Cooler
The Super Sub measures 5.5 inches long and 3.75 inches tall, with a stable base and a large tubular section that’s capable of handling the largest tokes. Its horizontal layout supports a large surface area that helps to efficiently cool and filter the vapour. The 14mm intake joint leads to a low horizontal slit percolator, allowing for varied water volumes. The other end of the piece features another 14mm joint compatible with the included whip, perfect for sharing sessions comfortably. Four glass feet stabilize the Super Sub, helping keep any mess off your surfaces and making it easy to maintain. Its horizontal design flow and whip let you hold your face away from hot vapour, offering a truly comfortable experience for all water pipe enjoyers.
The Super Sub Pipe is enough of an upgrade that even owners of the original should take a look. The ability to empty your load with a glass stopper instead of fiddling with getting your hot vape out of a 14mm is the dream. The Super Sub Pipe is a well-rounded water pipe that shines in every aspect.
Sneaky Pete Pass-Through Injector Bowl
The Sneaky Pete Pass-Through Injector Bowl is an 18mm female bowl designed to work with most injector vaporizers, including the Terp Hammer, Freight Train, B-Zero, and many more.
Secure and Replaceable Metal Screen
Featuring a 20mm metal screen, this bowl offers superior airflow for the biggest and smoothest hits. The screen stays securely in place, allowing you to stir your bowl without hassle. Additionally, it's removable and replaceable, so you can easily pop in a new one whenever needed.
Universal Connection
The Sneaky Pete Pass-Through Injector Bowl terminates in a 14mm male connection, making it compatible with the most popular water pieces. This ensures you can use it with your favourite setups without any compatibility issues.
Innovative Pass-Through Design
The standout feature of this bowl is its pass-through connection. This design allows you to easily clear your water pipe without needing to remove your vaporizer. This not only simplifies the process but also reduces the risk of breakage, as you can leave everything assembled and just remove the glass stopper to clear your pipe.
Superior Airflow for Optimal Hits
We chose a metal screen to provide superior airflow, allowing you to take the biggest and smoothest hits possible with minimal draw restriction. While glass screens have their own advantages, the metal screen in the Sneaky Pete Pass-Through Injector Bowl is specifically designed for maximum performance.
The Donut Pipe Brings Considerable Cooling to Your 14mm Vaporizers
Stoners like to show off their gear, especially the high-volume rigs that tend to come out more often when friends are over. You might not know this, but cannabis aficionados can often be quite clumsy, often because of enjoying the aforementioned rig. We love stable rigs with the capacity for a large volume of water, and the Donut Pipe hits the nail on the head. As the wise Homer Simpson said, “Mumm… donuts.” Yes, Homer, ‘mmm, donuts’ indeed.
Shaped Like a Donut, Bubbles Like a Pipe
Like its namesake, the Donut Pipe is round with a flat base. We focused on a few specific things with this design to ensure that not only did it fit a niche market, but it would also be pretty much anyone’s ideal first water piece. With a 14mm female intake joint that leads into our famous disc percolator, you can drop pretty much any vape that’s native to 14mm or has an adapter and see thousands of bubbles cool down your vapour.
Just Add Water for Stability
The construction of this piece has a focus on stability. With a capacity for a substantial amount of water, a low centre of gravity, and a whip mouthpiece for tabletop usage, this may be the shortest water piece that we’ve produced without sacrificing stability, water reservoir size or compatibility.
Great With Ball Vapes and More
Our favourite way to use the Donut Pipe is with a ball vape and friends. The large amount of water combined with the disc percolator cool down those potent tokes and you won’t have to worry about instability because of the inherent size and weight and the whip is perfect for sharing. The Donut Pipe is also great for something like the Anvil; it’ll let you really milk up the water piece.
There’s a Reason Everyone Loves Donuts
From Federal Donuts in Philly to Cartems in Vancouver, this classic dessert is enjoyed by everyone. It’s a dependable snack that can easily punch above its weight. The Donut Pipe is an ideal solution for those looking for a water piece that is stable, holds a lot of water, a low-profile mouthpiece and the compatibility to work with most of your vaping arsenal.
Find out more about the Donut Pipe here.
Premium XL Bowl Upgrade
Introducing the 18mm Female XL Glass Injector Bowl, a premium upgrade from the standard option.
Maximized Compatibility
Featuring an unfrosted 18mm female input joint, this injector bowl ensures your vaporizer slides in and out with ease. It's designed to fit a wide range of popular devices, ending in the widely used 14mm male joint size.
Enhanced XL Capacity For Heavy Hitters
This XL version offers a significantly larger bowl capacity compared to the original model. With double the size of the regular bowl, it's ideal for those who want bigger hits. You can pack a substantial amount of flower for massive hits or use a smaller amount for regular function.
Robust Metal Screen
The rigid metal screen stays securely in place, even during stirring. The fluted bowl design allows the screen to fit snugly, providing a durable solution when handled with care. Replacement screens are also available if you need a fresh one.
Easy To Handle
The 18mm Female XL Glass Injector Bowl comes with a sturdy glass arm on the side, making it easy to move and handle, even when hot.
Increase The Airflow in Your Solo 3
Get more airflow out of your vaping sessions with the High Airflow 14mm WPA for Arizer Solo 3. Specifically designed to optimize your Arizer Solo 3, this water pipe adapter ensures you get the most out of every draw.
Compatibility Across Models
Not just limited to the Arizer Solo 3, this versatile adapter is also compatible with a range of other Arizer models, including the Solo 2, Solo 2 MAX, Arizer Air, and Air MAX. Enjoy enhanced performance across your favourite devices.
Two Convenient Sizes
Choose the size that suits your needs with our standard-sized version or the new XL version. Both options are designed to work perfectly with your device, providing flexibility and convenience no matter what sort of session you have in mind.
Improved Airflow Design
Say goodbye to restricted draws. The High Airflow Stem replaces the traditional glass screen with a removable and replaceable metal screen. This innovative change significantly boosts airflow, allowing for less restricted draws.
The 14mm male joint works with a 14mm female joint - the most popular joint size, making this adapter compatible with the vast majority of water pieces we carry.
Increase The Airflow in Your Solo 3
Get more airflow out of your vaping sessions with the High Airflow Stem for Arizer Solo 3. Specifically designed to optimize your Arizer Solo 3, this stem ensures you get the most out of every draw.
Compatibility Across Models
Not just limited to the Arizer Solo 3, this versatile stem is also compatible with a range of other Arizer models, including the Solo 2, Solo 2 MAX, Arizer Air, and Air MAX. Enjoy enhanced performance across your favourite devices.
Two Convenient Sizes
Choose the size that suits your needs with our standard-sized version or the new XL version. Both options are designed to work perfectly with your device, providing flexibility and convenience no matter what sort of session you have in mind.
Improved Airflow Design
Say goodbye to restricted draws. The High Airflow Stem replaces the traditional glass screen with a removable and replaceable metal screen. This innovative change significantly boosts airflow, allowing for less restricted draws.
DynaVap HyperDyn: The Ultimate "Big Bowl" Vaporizer
A New Experience with State-of-the-Art Design
The HyperDyn is DynaVap’s first “Big Bowl” vaporizer, offering a completely new experience with its state-of-the-art tip and cap combination. Featuring a larger chamber volume (average of 0.25g), the HyperDyn is constructed with medical-grade titanium, colored and protected by DynaVap’s advanced DuraDyn coating technology. This innovative device boasts a 10mm and 14mm taper, accommodating water piece use, and remains modular with previous DynaVap midsections, tips, and mouthpieces.
Who is the HyperDyn For?
Connoisseurs looking for a larger “session style” DynaVap vaping experience, and those yearning for a DynaVap with a bigger bowl.
Benefits
Massive Rips & Heavy Hits
Push thermal extractions to the limit with the HyperDyn's larger chamber.
Durability
Crafted from high-quality, medical-grade titanium and built to last a lifetime. Fully machined and crafted in Wisconsin, USA. Everything is titanium except for the o-rings and thermostat.
Flavour Explosion
Experience terpenes like never before with enhanced flavour from your dry herb and/or concentrate.
Prolong Your Session
Enjoy longer sessions with the larger capacity chamber, reducing the frequency of reloads.
Eliminate Combustion
Enter a smoke-free world of enjoyment with the HyperDyn, leaving combustion behind for good.
Discreet, Portable, & Modular
Designed to fit in your pocket and be enjoyed during any activity. Modular with previous DynaVap components.
Battery-Free
No need for batteries. Just use a torch lighter or induction heater, and you’re ready to go.
HyperDyn Features
- Massive Rips: Enjoy bigger hits with the larger tip chamber/bowl volume, approximately 2.5x the original chamber size.
- Extended Sessions: Prolong your vaping session with a larger capacity bowl that extends time between reloads.
- Scratch Resistant: Clean, scratch-resistant look from DynaVap’s DuraDyn coating technology.
- Durable Build: Hardened titanium guarantees a long-lasting device.
- Optimal Bong Fitment: Built-in 10mm and 14mm tapers for use with water pieces.
- Modular Compatibility: Compatible with all previous DynaVap midsections, tips, and mouthpieces. (Note: The Hyper Cap only fits the Hyper Tip.)
- Ergonomic Design: Ergonomically designed stem enables easy Airport usage.
- Precision Machined Cap: Titanium Cap that connects to the Hyper Tip without threads, consistent look and function with DynaVap’s Captive Cap technology.
- Adjustable Airflow: Airflow is adjustable via the connection between the Hyper Tip and Hyper Cap. Tailor your draw to your preference.
- Seven Unique Airflow Settings: Adjustable Airflow Control from seven settings controlled by the condenser depth within the mouthpiece.
- Optimal Temperature Control: Hyper Cap engineered to “click” when heated to the optimal vaporization temperature, ensuring an exceptional session.
How to Use
1. Remove the Cap
2. Load Your Dry Herb into the Tip chamber/bowl.
3. Place the Cap Back on the Tip
4. Heat the Cap with a Torch or Induction Heater until it Clicks.
5. Inhale from the mouthpiece end.
6. The Cap will click again when it has cooled down.
HyperDyn Parts
- DynaVap’s Hyper Cap
- Titanium Tip: Hyper
- Titanium CCD (Screen)
- High Temp O-Rings (2)
- Titanium Condenser Assembly with Mouthpiece: Hyper
- High Temp O-Rings (2)
- Titanium Stem: HyperDyn
- DynaStash XL: Wenge
- Hyper Dosing Capsule
Experience the new standard in vaporization with the DynaVap HyperDyn.
Read the full review: What Is The Dynavap Hyperdyn Top 5 Things To Know
Cannabis Hardware Aluminum Enail Handle Compatibility
Works with most ball or injector style vapes, ensuring versatility and convenience for a wide range of users (not just Cannabis Hardware).
Crafted in the USA
Precision-engineered and meticulously crafted from premium aluminum, this handle embodies American craftsmanship at its finest, guaranteeing durability and reliability for years to come.
Lifetime Investment
Designed to be a high-end piece of gear, this handle is not just a purchase, but an investment in your vaping experience. With its exceptional build quality, it promises to stand the test of time, providing unmatched performance with every use.
Enhanced Handling
You've invested in a quality vape, now enhance your experience with the Cannabis Hardware Aluminum Enail Handle. Its ergonomic design ensures a comfortable grip, making it easier to handle your vape with precision and control. Plus, it remains cool to the touch, even during extended sessions, for added comfort and safety.
Easy Assembly
While assembly is required, rest assured that it's one of the easier ones to put on. Enjoy hassle-free installation and get ready to elevate your vaping experience to new heights with minimal effort.
Minimalist Design, Maximum Performance
Discover the perfect fusion of minimalist design and exceptional performance with the Camouflet Injector. Lightweight and versatile, this injector heater is designed for use with 20mm coils powered by PID temperature controllers, or with the Camouflet Inductor induction heater (you can even use it with a big ol' torch as well).
Signature Technology, Unique Power
Utilizing the same cutting-edge technology developed for the Convector but applied in a larger format, the Camouflet Injector delivers a unique and powerful signature that's sure to tantalize your senses and delight your taste buds. The Injector is plenty powerful after a proper heating, don't let the small size fool you.
Camouflet Injector Features:
- Stainless Steel Housing: Built to last, the Camouflet Injector features a durable stainless steel housing for longevity and durability.
- Patent-Pending Heater Matrix: Experience enhanced performance with the patent-pending heater matrix, ensuring rapid and consistent heating for optimal vaping sessions.
- 18mm Male Attachment: Compatible with 20mm e-nail coils with 4 or 5 coil wraps, the Camouflet Injector offers versatility and convenience.
- Compatible with the Inductor: Pair the Camouflet Injector with the Inductor for seamless integration, enhanced performance, and a little magic in your next session.
- 3mm Threading for Handle Connection: Connect with ease using the included handle or use a custom handle, offering flexibility and customization in usage.
- Tethered or Untethered Use: Enjoy the freedom to use the Camouflet Injector tethered or untethered, providing versatility to suit your preferences. A wireless/untethered Injector is the height of convenience and must be experienced for yourself to fully appreciate just how sweet it is.
What's Included:
- 1x Injector
- 1x Handle
- 1x Retention Ring
Sleek and Minimalist Design
The Convector comes in either stainless steel or titanium, and boasts a compact and minimalist design, offering a convection-focused heater that's user-friendly for novices and seasoned enthusiasts alike. Despite its size, this device packs a punch beyond its weight class, ensuring a satisfying vaping experience every time.
Customizable Air Path
Tailor your vaping experience with ease by choosing between the single-bore, high-flow ceramic air path tube or our quad-bore cooling tube. The single-bore tube provides lower draw resistance and exceptional flavour, while the quad-bore option increases cooling and slows draw speed. All of our Convector models are the quad-bore option, though a single-bore air path can be purchased separately.
Ultra-Fast Heating and Cooling
Equipped with a brand new, low thermal mass patent-pending heater design, the Convector delivers ultra-fast heat-up and cool-down times, allowing you to enjoy your vaping sessions where you want, when you want. You'll only heat the device for literally seconds, it heats up even faster than you expect it will.
Advanced Features
- Camo Cap: Featuring a precision heater plate assembly, the Camo Cap ensures optimal performance. Laser-welded heater plates with precise placement enhance heating consistency and prevent dislodging.
- Stem: Enjoy an 8mm precision bore throughout the stem, allowing for easy assembly with your preferred chamber or mouthpiece (DynaVap stems also use an 8mm connection). An improved taper ensures a better fit into 10mm glass joints, allowing you to use it with a 10mm female water piece without needing an adapter.
- Chamber: The ceramic tube can be inserted into the chamber's back/male connection side, simplifying assembly with a single O-ring. An extended chamber connection ensures a secure fit to the stem.
How to Use
Using the Convector is straightforward and doesn't have a huge learning curve. Simply place your ground material into the chamber, ensuring not to overpack it for proper airflow. Attach the Camo Cap, heat the tip for your desired length of time with either a torch or an induction heater, and inhale from the stem opening. For even better performance, pair the Convector with the Inductor heat source.
What's Included
- 1x Titanium Convector Device
- 1x Titanium Camo Cap
- 1x Titanium Chamber with O-rings
- 1x Stainless Steel Chamber Screen (Friction fit and replaceable)
- 1x Titanium or Stainless Stem
- 1x Bamboo Carrying Tube
Titanium Construction
Crafted from premium titanium, the Convector XL boasts durability and longevity for long-lasting performance and simple maintenance.
Enhanced Extraction Capability
Experience greater extraction capabilities with the Convector XL's large heater plate matrix, accommodating up to 0.2g of material for optimized sessions. The convection action delivers fantastic flavour and extra strong effects.
Cooling Fins and Friction-Fit Screen
Designed for optimal airflow and easy maintenance, the Convector XL features cooling fins on the chamber and a friction-fit replaceable screen. Do not underestimate the airflow on the Convector series, the extremely free airflow is one of the best features.
Quad Bore Ceramic Cooling Insert
Enjoy improved cooling with the optional quad bore ceramic cooling insert. The ceramic insert helps to improve the quality if your vapour before you inhale, leading to cool and comfortable hits.
14mm Male Tapered Stem
Achieve versatility and compatibility with glass accessories using the 14mm male tapered stem, ensuring seamless integration with your favourite 14mm female water pipe - no adapter required.
Modular Design for Versatility
Unlock endless possibilities with the Convector XL's modular design, featuring a DynaVap stem sized 8mm connection for seamless customization tailored to your preferences.
The Next Evolution in Vaping
The Convector XL's large diameter and shallow chamber design offers "one hit" extraction capability. When you combine this with the large chamber size of the XL, you get a monster heavy hitter with convection strength.
Unmatched Rapid Extraction
With a 70% larger heater matrix than the standard sized Convector, the Convector XL ensures rapid extraction and uniform convection penetration, raising the bar for efficiency in vaping.
How to Use
Simply load your favourite ground material into the chamber, ensuring not to pack too tightly for optimal airflow, attach the Convector cap, heat the tip for only a few seconds, and inhale from the stem opening. For truly next level performance, pair with the Inductor heat source for flame free heating.
What's Included
1x XL Convector Device
1x XL Camo Cap
1x XL Titanium Chamber with O-Rings
1x XL Stainless Steel Chamber Screen - Friction fit and replaceable
1x XL Titanium Stem
1x XL Ceramic Quad bore cooling tube with O-Rings
1x Bambox
1x Burner Torch Lighter
Find out more about the Convector XL in our full review here.
The Easiest Way to Upgrade Your Venty
Upgrade your vaping setup with the Venty Titanium Mouthpiece, designed to replace the standard plastic option for a premium feel. Crafted from durable titanium, this mouthpiece offers a superior mouthfeel, providing a smoother and more enjoyable vaping experience.
Easier to Clean
Say goodbye to difficult cleaning routines – titanium is easy to clean, ensuring hassle-free maintenance and optimal hygiene. With a secure and snug fit, the Venty Titanium Mouthpiece ensures a solid connection to your device, minimizing leaks and maximizing vapour quality.
Tight Fit for a Solid Connection
For added convenience, the mouthpiece comes with an extra ring, providing a backup in case of loss or damage. Plus, it still allows the mouthpiece to swing closed and remain protected within the cooling unit, ensuring safe and secure storage between sessions.
Easy to Enjoy
Affordable and practical, the Venty Titanium Mouthpiece is a logical upgrade for your Venty device, offering improved overall vaping enjoyment. Experience the difference today and enhance your vaping experience with the Venty Titanium Mouthpiece.
Behold The Starship - Universal Beaded Stem
Say goodbye to the hassle of searching for specific Sneaky Pete Rocket Stems for your vaporizer. The Starship is here to revolutionize your vaping experience with its universal beaded stem, designed to fit any 14mm male water pipe adapter.
Universal Compatibility
Our Rocket Stems have garnered huge popularity, but the need for different ones for each vaporizer isn’t ideal. The Starship eliminates this hassle by offering a universal solution that fits any 14mm adapter, ensuring compatibility across various devices.
Advanced Filtration
Filled with an array of small, multicoloured glass beads, The Starship acts as a superior filtration system. These beads effectively sift out large particulate matter before it reaches your mouth, providing a smoother and cleaner vaping experience, and less Scooby Snacks along the way.
Enhanced Cooling
Experience a significant cooling effect on your vapour with The Starship. As the vapour travels through the beads, they efficiently absorb heat along the way, preventing you from inhaling that heat. The result? A noticeably cooler and more enjoyable vaping session.
Substantial Design and Function
Crafted to be more than just a functional accessory, The Starship is a substantial piece that can replace a small water pipe. Its robust build ensures durability while providing substantial cooling to any number of vapes you throw at it.
Full Flavour Preservation
Unlike traditional water pipes, The Starship offers substantial cooling without sacrificing flavour to any degree. By bypassing water filtration, it retains the full flavour profile of your vapour, which is appreciated by the true aficionado.
Compact and Convenient
Standing just over 6” tall and featuring an unfrosted 14mm female joint, The Starship offers a compact and convenient solution for your next session. Upgrade your vaping experience with The Starship - compatibility and cooling taken to new heights.
See our full video review on The Starship here.
The Easiest Way to Upgrade Your Venty
Upgrade your vaping setup with the Venty Glass Mouthpiece, designed to replace the standard plastic option for a premium feel. Crafted from high-quality glass, this mouthpiece offers a superior mouthfeel, providing a smoother and more enjoyable vaping experience.
Easier to Clean
Say goodbye to difficult cleaning routines – the glass material is easy to clean, ensuring hassle-free maintenance and optimal hygiene. With a secure and snug fit, the Venty Glass Mouthpiece ensures a solid connection to your device, minimizing leaks and maximizing vapour quality.
Tight Fit for a Solid Connection
For added convenience, the mouthpiece comes with an extra ring, providing a backup in case of loss or damage. Plus, it still allows the mouthpiece to swing closed and remain protected within the cooling unit, ensuring safe and secure storage between sessions.
Easy to Enjoy
Affordable and practical, the Venty Glass Mouthpiece is a logical upgrade for your Venty device, offering improved overall vaping enjoyment. Experience the difference today and enhance your vaping experience with the Venty Glass Mouthpiece.
Microdose in your Dosing Capsules
Introducing the Filling Pads for Dosing Capsules, precision-crafted in Germany by Storz & Bickel. Compatible with a range of vaporizers including the Mighty, Mighty+, Crafty, Crafty+, Volcano, Volcano Hybrid, and Venty models - if it can use a Dosing Capsule, you can use the Filling Pad.
Less Material Per Load
Filling Pads reduce the amount of material needed in each capsule, and are ideal for microdosing or for those seeking a lighter load. Reusable and durable, they offer both convenience and sustainability.
Keeps Things Cleaner
Say goodbye to wasted material and messy spills - Filling Pads ensure that even the tiniest particles stay securely contained within the capsule. Upgrade your vaping routine with the Filling Pads for Dosing Capsules from Storz & Bickel.
