The Crossing Heated Dab Tool is the easy way to load sticky concentrates into your wax pen or e-rig without scraping the sides of the bowl. A ceramic hot-knife tip, three voltage levels, and simple one-button controls let you warm and release your dab with precision. It’s compact, USB-C rechargeable, and comes with a protective cap for pocket-safe carry.
Key Features
-
Heated ceramic tip for smooth, mess-free loading
-
3 voltages (Blue / Green / Red) to match different concentrate textures
-
Two heat modes: quick cycle (double-click) or manual hold
-
USB-C charging with included cable
-
Protective cover cap for safe storage
-
550 mAh battery for plenty of reloads between charges
-
One-button operation—fast to learn, easy to use
Why You’ll Like It
-
Less mess: Warm the tip and your dab slides cleanly into the chamber—no more hard scraping.
-
Better control: Choose a lower level for softer waxes or higher for firmer concentrates like shatter.
-
Pocket-friendly: Lightweight, capped, and ready to travel.
How to Use the Crossing Heated Dab Tool
- Remove the glass/plastic cap.
-
Power on: Press the button 5× to turn on (repeat to turn off).
-
Select voltage: Press 3× to cycle Blue → Green → Red.
-
Heat the tip:
-
Quick cycle: Press 2× to start a short auto heat.
-
Manual: Press & hold to heat while you load.
- Scoop your concentrate, hover over the chamber, then warm the tip—after a few seconds the dab will slide off cleanly.
- Replace the cap when finished and power off.
Tip: Use Blue/low for most waxes; bump to Red/high for firmer textures.
Battery & Charging
The integrated 550 mAh battery delivers many reloads per charge. Top up with the included USB-C cable. As with any small device, actual run-time will vary by heat level and usage.
Easy Cleaning
While the tip is still warm (not red-hot), wipe it with a vape-safe cleaning wipe to remove residue. Keep the protective cap on during storage to extend tip life and prevent debris.
Specifications
Tip |
Ceramic heated “hot-knife” style |
Heat Levels |
3 voltages (Blue / Green / Red) |
Controls |
1 button • 5× power • 3× level • 2× cycle • hold to heat |
Battery |
550 mAh (integrated) |
Charging |
USB-C |
Cap |
Included protective cover |
Use Case |
Loading wax pens & e-rig chambers |
What’s in the Box
- Crossing Heated Dab Tool (Hot Knife)
- Protective tip cover
- USB-C charging cable
- Owner’s manual
FAQs
Which heat level should I use?
Start on Blue for softer waxes. If the dab doesn’t release cleanly, step up to Green or Red for firmer concentrates like shatter.
How do I keep the tip clean?
Wipe the tip while warm with a vape-safe cleaning wipe every few sessions. Avoid scraping with metal tools.
Will it work with my wax pen or e-rig?
Yes—this tool is brand-agnostic. It simply helps you transfer concentrates cleanly into most chambers.
Is there an auto shut-off?
The quick-cycle heat runs for a short, pre-set interval. Always power off when finished and replace the cap.
Safety Notes
- The tip gets hot—keep away from skin, fabrics, and flammables.
- Allow the tip to cool before capping or cleaning.
- Charge with a quality USB-C cable and reputable power source.
- Store capped, out of reach of children and pets.