Great White North Vaporizer Accessories

The Crafty+/Mighty+/DynaVap 14mm Whip Adapter is the perfect way to add some length to your air-path and cool your hits through a water pipe while using these top-notch dry herb vaporizers. This super direct and straightforward way to lower your vapour temperature attaches directly to the stock mouthpiece of your Crafty or Mighty; there is no need to remove the cooling unit. When using the Whip Adapter, you can keep your vape upright, there is no need to invert it, just hold it in your hand, sit it on a table, or whatever you prefer. Measuring just under 35cm long, the business end of the Whip ends in a 14mm male joint for maximum compatibility. The end which attaches to the mouthpiece of your vaporizer has a nice tight fit for a perfect seal. A great option for any owner of a Crafty, Crafty+, Mighty, or Mighty+, add the 14mm Whip Adapter for an easy, viable cooling option. This adapter will also work with any standard DynaVap body to add a 14mm male whip adapter to your favourite VapCap!

Read more less

This 18mm Female Glass Injector Bowl is a luxurious replacement for the default solution. The unfrosted 18mm female input joint allows the injector-style vaporizer to slide in and out smoothly, and is deep enough to accept any of the popular devices on the market. The bowl terminates in either a 14mm male or 18mm male to give you more options. The metal screen is rigid and stays in place even while stirring.  The fluted bowl allows for the screen to slot in place, leading to a near permanent solution when treated kindly.  Replacement screens are also available should you want install a new one at any point. The 18mm Female Glass Injector Bowl also includes a sturdy glass arm on the side that allows for easy movement and handling of the bowl, even while hot.

Read more less

Match your mug with your gear! Sneaky Pete’s logo embellished Coffee Mug can hold 10oz of your favorite beverage. The Sneaky Pete Mug is the standardized size, made from thermal ceramics and it is dishwasher and microwave safe.  Fill your Sneaky Pete Mug with your preferred roast, pack your device with your best flower, and wake up with the perfect ‘hippie speedball’ to start your day.

Read more less

Extend the Life of Your Flower with the Sneaky Pete Half-Bowl Converter What if I told you that you could increase the amount of time that your flower lasts with one small addition to your DynaVap tip? The Sneaky Pete Half-Bowl Converter is useful to any DynaVap owner who wants to improve the efficiency and ease-of-use of their device.  Precision Design and Quality Manufacturing Designed by Sneaky Pete and manufactured by DynaVap to the high level of precision and quality they are known for. This Half-Bowl Converter kit includes a stainless steel version, a titanium version, and a titanium CCD, to turn any DynaVap tip with an adjust-a-bowl into the perfect half-bowl setup. Simplified Use and Maintenance While the stock adjust-a-bowl is great, getting the CCD perfectly locked into the half-bowl position can be time consuming and difficult, especially if your CCD is less than pristine. The Half-Bowl Converter eliminates this problem. Pop the Half-Bowl Converter into the tip and your CCD will easily snap into place. It takes seconds and there is no chance of it coming out unless you want it to (but you won’t want it to!). It's also super easy to remove for cleaning, swapping to the other metal type, or if you want to switch back to a full bowl. Enhanced Thermal Mass with Stainless Steel The new stainless-steel version of the Converter adds even more thermal mass to your half-bowl setup, supercharging it to be able to take down a half-bowl load entirely in one hit by boosting the efficiency of vaporization. At 0.075g compared to the titanium version’s 0.045g, the stainless-steel Half-Bowl Converter has a clear weight difference and a slight bronze color compared to the titanium, so it’s easy to tell them apart. During in-house tests, we were seeing some of the biggest DynaVap hits that we’d ever produced. A nice side-effect, for sure. Titanium for Purity and Flavour We love the stainless, but the titanium Half-Bowl Converter is no slouch. The power boost is a little less pronounced, but vapers who prioritize flavour will appreciate the purity that titanium brings to the vaporization process when you’re refreshing your bowl often. Versatility and Cost Efficiency The Sneaky Pete Half-Bowl Converter works with induction heaters or a torch and is a super inexpensive accessory that will pay for itself quickly, thanks to the improved efficiency. Get more bang for your buck and enjoy your flower for longer with the Sneaky Pete Half-Bowl Converter. See the full review of the Sneaky Pete Half-Bowl Converter here.

Read more less

Many of the common vaporizers on the market use an o-ring to fasten connections and eliminate airflow leaks. These bulk non-OEM o-rings act as a replacement and are an affordable, bulk solution that will fit on any tip.

Read more less

When you want extra cooling for your Puffco Peak Pro or Peak, the Bent-Neck Peak Pro Top is your ticket. The Pro Top holds a massive volume of water compared to the stock piece, and it will make every hit much cooler, while also adding additional filtration. The Bent-Neck Peak Pro Top is the perfect upgrade from the original water attachment of either Puffco Peak device. It’s sized to fit directly onto your Pro or Classic base and has an effective percolator that holds more water, effectively cooling those monster rips that the Peaks are known for.  Another advantage of this piece is the drawn out and bent neck. Compared to the straight opening in the top of the original model, the bent neck design more naturally matches the angle you use when operating the Pro or Classic, so it's much more comfortable - plus the bend helps to eliminate any accidental drinking.  The mouthpiece is flared and worked for a more natural feel. The glass is thick, durable, and attractive, complementing the Peak’s sophisticated design. The Bent-Neck Peak Pro Top is a true upgrade.

Read more less

Sometimes your tools need tools, the Scrape & Stir Tool is made for that situation. Coming in at 4” in total length and made from stainless steel, its comfortable feel and dimensions mean it will fit snugly in your hand, if you’ve found other vape tools too small, that won’t be a problem here. The Tool is composed of two sections: a 2.5” reinforced stirring/poking end and a 1.5” grip section. The stirring section is nice and long to get into deep bowls with ease, for general vape work and maintenance, or even to scrape off that stubborn detritus! The grip section is super useful for tamping down your bowl or to help place a DynaVap CCD in position. Finally, a stable, lengthy, and comfortable Scrape & Stir Tool that isn’t made for ants!

Read more less

**Capsules not included** After many requests for a way to carry more Dosing Capsules we created the Crafty+/Mighty+ XL Capsule Hauler to provide a secure place to store up to eight preloaded capsules. Super convenient and with a striking new colour scheme composed of a black main body with a red upper section, the Capsule Hauler is perfect for heavy and medicinal users who seek out long sessions and also want to limit the amount of baggage they have to carry. Hook this odour-proof and water-proof capsule to your key chain using the included key ring for handy use. All you’ll need to do is add your dosing capsules, fill them, and you will get a large number of full sessions from vapes including the Crafty, Crafty+, Mighty, Mighty+, and Volcano. You'll never be caught unprepared with the Crafty+/Mighty+ Capsule Hauler.

Read more less

Size matters! The Lubinski SK-79 is large enough to fit comfortably in your hand, while also housing a massive fuel reservoir. Perfect for taking on the road without the worry of needing to refuel, it also stands upright on its own, allowing for hands free usage when the need arises. The SK-79 comes with a dual-function flame lock, allowing you to both lock the torch to avoid accidentally igniting it, or lock the flame in the on position, eliminating the need to hold the trigger. To complete the user-friendly experience, there's also an analogue flame adjuster for temperature control.  Ideal for DynaVap or Sticky Brick users, the Lubinski SK-79 feels good in your hand, and with its enormous fuel reservoir, it will deliver the perfect flame for as long as your heart desires. Due to postal laws we are unable to ship lighters prefilled.

Read more less

Everyone likes their glass, adapters and equipment to look and operate like it's brand new. We want to make sure that you can keep your tubing looking and operating at peak performance for a reasonable cost. The 36” Globe Whip Tubing is designed especially for our C-150 and C-250 globe glass water pieces and is an exact replacement for the original tubing. Our tubing can replace your whip when it becomes too dirty, or even to add length to your existing whip if you’d like a longer extension from your water piece. Look sharp, with the Globe Whip Tubing extension/replacement. 

Read more less

These super versatile screens can be used for stems, bowls, and more. Made from high-quality pure stainless steel, they come in ½” or ¾” diameter and can be cut down to provide an exact fit. They have edges that will not fray or come apart, ensuring reliable and longer lasting use. Sold in packs of five; pick up a stack and you’ll never find yourself being caught unprepared again!

Read more less

Simple, elegant, and effective. This pure Glass Utility Stand features a wide, stable base, with three different joint options: 14 or 18mm male, or 14mm female. Easy to clean and versatile, they're a great place to store your vertical glass pieces, bangers, glass vaporizer adapters, or even a vape!  

Read more less

Take a stand for your 510 Cartridges! Our sturdy, custom-made, threaded stands will hold your cartridge firmly in place, which means they're always where you left them. The stands are also perfect for filling your cartridges, allowing the material to soak into and permeate the atomizer, so you don't get the dreaded 'dry hit' when you fire it up. There are multiple color options available for this durable, minimalist metal design. The 510 Cartridge Stand is an affordable way to keep your cartridges working their best, while keeping your vape setup orderly.

Read more less

When glass meets glass, ensure the connection stays secure with our plastic Keck Clips. Whether you're securing a freshly filled bowl of flower, or keeping your mouthpiece or Sidestep Adapter firmly in place, these clips ensure that your glass stays safe and attached, helping you avoid mishaps and breakages. Keck Clips are sturdy and stiff, but won't scratch your glass piece. For peace of mind, get clipped.

Read more less

The Sneaky Pete Multi-Stand brings extra stability to the Arizer Air or Air 2, providing a soft silicone base that'll keep your vape safely upright, which is especially useful if you're also using the BubbleMax. It's flexible enough to work with a variety of units, but it really shines with the Air or Air 2. The Multi-Stand is an affordable accessory that you'll find a host of uses for, and it comes in cool black silicone emblazoned with the Sneaky Pete logo. While it measures 24mm cubed (width, depth, and height) the pliable silicone will accept some larger vapes.  Add some stability to your vaping experience with the Sneaky Pete Multi-Stand.

Read more less

If the Arizer Air 2 or Solo 2 are part of your vape game, well, here's a game changer! The BubbleMax gives you the cooling of a large water-piece in a compact package, delivering cool hits through your Arizer vape. The difference in performance after adding the BubbleMax is dramatic, while maintaining the discrete and portable attributes of Arizer vapes.  Standing 6" tall with a tube percolator boasting four slits for additional bubbling, the BubbleMax gives you an easy draw from a mouthpiece canted to a comfortable position, all through pure glass, tip to tip. We designed and built both variants of the BubbleMax here at Sneaky Pete Vaporizers to fit perfectly with the Multi-Stand, and it's an addition we're thrilled to share with you. Get the cooling you'd expect from a stand-alone water-piece and change your game. Get the BubbleMax; it's cool. - Compatible with the Arizer Air MAX, Solo 2, Air SE and Air 2- Numerous slits on percolator provide cooler temperature hits- Ultimate purity from all glass production with a permanent filter - Portable and discrete, but highly effective- Designed to be a significant improvement over the stock experience- We love this one!- Never leave a water piece unattended on your vape, remove between uses

Read more less

Glass DynaVap Tip Adapter The LittleFinger Adapter is the easiest, cleanest, and most convenient way to use any DynaVap tip with a waterpiece. With its universal 10, 14, or 18mm male joint, the LittleFinger truly does adapt to whatever your needs are. Two wide glass bands provide extra durability while also allowing you to set the unit down when it's hot, as it holds the tip suspended in the air rather than laying it on the table. Plus, it's enjoyable to watch the vapor travel through the glass. Fun, versatile, and super convenient. Get cooling hydration combined with the purity of glass with the LittleFinger Adapter.

Read more less

Connect a whip to any 10, 14, or 18mm female waterpiece with the Universal Whip Adapter. The multi-sized glass connector provides greater compatibility than our standard whip adapter. With its 8.1mm whip connector it can be used with a Volcano Hybrid, Arizer Extreme Q, and many more setups. Ready to whip it good? Get the Universal Whip Adapter.

Read more less

The Rattle Stem is a unique color stem for your favorite DynaVap tip, featuring 10 glass cooling beads. The beads provide more cooling surface area and disrupt the vapor pathway for a cooler, smoother hit. For even further cooling and more control over your hit, it features a carb hole to let you easily clear the stem, and control the amount of fresh air coming mixing with your vapor. Cover the carb hole for a thicker hit, or leave it open for something much cooler. The Rattle Stem works with any DynaVap tip, and comes in 4 vibrant colours. Key Features: - 3" total length- Available in 4 colors- 10 glass beads to cool and disrupt air flow- Carb hole to control strength of hit

Read more less

Use 10mm Vapes with 14mm Glass Simply Bring harmony to your vape setup with this versatile adapter. This low profile adapter is the super easy way to turn your 14mm female joint into a 10mm female. It allows you to hook up your favorite 14mm female water piece to a 2020 DynaVap M, or any other 10mm male vaporizer or accessory, and you're all set. This low profile adapter will not add any height, is barely noticeable, and fits snugly. Bring flexibility to your vaping rig: Adapt!

Read more less

Complete your V.A.S. (Vaporizer Accessory Stand) with a Round Top or Flat Top Glass Stopper. Made from borosilicate glass, the Glass Stopper allows you to fill the reservoir arm with isopropyl alcohol and will prevent the alcohol from evaporating. Isopropyl alcohol is the ultimate cleaning solution for all of your vapes and accessories, so keep it close at hand at all times. Vape enthusiasts know the V.A.S. is the perfect accessory for all of your desktop organizational needs, and the Glass Stopper will give even more utility to your setup.

Read more less

The Maraca Glass Stem combines many different cooling elements in one piece that’s convenient and comfortable to hold and use.  The tip end is sized to fit any stainless steel or titanium DynaVap tip, and The Maraca Stem’s glass it thick and durable.  Behind the tip is a shotgun carb to clear the entire stem with a massive rush to the head.  After the carb is a restriction point followed by an expansion chamber, causing even more cooling.  The chamber contains 3 glass beads to further condition and cool the vapor, and it's enclosed at the back end by a pinch point with 3 pokes.  Finally, 3 glass nipples agitate the vapor completely before ending at the mouthpiece, much cooler and cleaner than when it left the tip. On top of everything else, it can double as a musical instrument.  Name another DynaVap stem that can do that 😉 Key features: - 100% glass- 85mm length- Fits any DynaVap tip- Shotgun carb at tip end- Glass beads agitate and filter vapor- Restriction point/expansion chamber adds cooling- 3 glass nipples finalize conditioning and complete cooling

Read more less

This bowl will fit into 14mm female joints. Three grips make it easy to use for the biggest hits!

Read more less

Our XL Clear Terp Pearls are made of 100% pure quartz and they’re 6mm diameter instead of the traditional 4mm size.  That may not sound like a huge difference, but it more than doubles the pearl’s surface area and triples its volume, so the pearl stays hot much, much, much, much longer (quadruple much-es!).  Put a couple inside the bucket before heating and use the airflow from one of our carb caps to push them around in your oil.  Hot pearls efficiently vaporize the oil as they roll, so they're perfect for taking huge slabs or micro-dabbing. Key Features: - Pure quartz- 6mm diameter- Comes in pack of 5- Adds XL efficiency and fun

Read more less