Featured Glass

The High Rise Water Pipe System is a Huge Step Up We’re movin’ on up, to the green side, in the sneakiest apartment in the sky-ighhh. From the innovative original creators of the Globe and Cube series, we’re here to ask if you’re ready to move up even higher in the haze to a skyscraper? If so, the incredibly high performing and pioneering High Rise Water Pipe System is ready for occupation. An Impressive Water Pipe Holds Lots or a Little Made from several components, the meat of the High Rise System starts with the water pipe, and it’s a considerable unit. With a wide base and massive reservoir, you’ll be able to fill it with enough water to cool down the hottest hits while being stable on the table. The High Rise features a high volume, ultra-bubbling, wide diameter percolator that both sits close to the bottom of the piece and is bolstered to it for additional strength. This low position lets you fill the water pipe with a small amount of water and still get some cooling which can be advantageous and provide the best flavour. Whip it Good and Share with Your Friends The glass piece has a 14mm input that is bolstered to the side of the unit for extra strength and on the top, you’ll find a second 14mm joint which is purposed for the included silicone whip. The High Rise is a true desktop centrepiece that you’ll want to share and show off as well. Staying in the vein of being impressed by the High Rise, the glass is the least interesting part! Where the real magic happens is in the “scaffolding”, the non-glass components that surround the High Rise and provide it with the unique abilities that it brings to the party. The bottom section of the scaffolding is a precision, 3D printed base with a small rubber pad in the centre where the glass sits. A Sturdy Scaffolding Protects the Glass There are 4 metal posts that screw into the base and will then secure the top metal section that sits directly on the glass in place. Once again, there’s a rubber pad where the glass would contact the other surface for peace of mind and safety. Now that the High Rise is assembled, you will see how substantial of a structure it really is, with enough mass to stand reliably regardless of what device you’re using it with. Finally, for those of us who are always misplacing our tools, the High Rise has a built-in swing arm that is pitted with different sized holes to support your extra bowls, adapters, and tools of various sizes. Light it Up While You Get Lit Up But what’s that? Off the top rope (or under the base) with the coupe de grace there’s a controllable, colour changing LED light disc that will light up your High Rise in a multitude of colours. You can choose to have one colour displayed, or the light can cycle through the available colours in order, it’s totally up to you! Battery shipping laws are weird, so the included remote comes with the battery installed, but the light is powered by 3 x AAA batteries that you’ll have to supply on your own. The High Rise is a special piece that brings both an impressive water pipe, a securely fastened protective cage, a tool organizer and a light show. We’re talking about high-end features in an extremely affordably priced rig that provide a significant step up from using a standard glass piece. Find out even more about the High Rise here.

Read more less

You Needed it, We Did It The poet laureate of Canada, Avril Lavigne, once pined, “why you gonna make things so complicated?” Well, keeping it simple is great and it has its place, and we visit that place often, but sometimes you just want to amp it up. Gear upon gear upon gear. Hell, we make a four-man water piece, you know we like to bring it now and then. Take the leap with us into the absolutely unique Pass-Through Micro Bubbler. A Bong for Your Bong The ingenuity of the PTMB starts with a 14mm intake that feeds into a micro bubbler from your main glass piece’s intake. Then attached to the side of the micro bubbler, there is another 10mm joint and there’s a matching glass stopper you can utilize with that joint like you would with any carb, but it will serve the function of not just emptying the micro bubbler, but your glass piece as well. Measure Twice, Buy Once While this is an incredible system, it will not work with all shapes and sizes, so make sure that your piece will fit before you go down that road. Or buy another piece that will fit, we’re not here to tell you what to do. Also, make sure the piece you’re connecting it to has some heft, as this PTMB has some weight to it as well and you don’t want the castle to come crumbling down. Double the Fun The Pass-Through Micro Bubbler is like putting another gun on your gun, a knife on your knife, a guitar on your guitar; you might think twice, but you’ll be glad that you did it. You’ll definitely look as cool as Jimmy Page while using the PTMB, that we can guarantee. Use it as a carb, extra hydration or just to look cool, just use it.

Read more less

Sleek and Simple Design Standing at 7.5" tall, The Straight Shooter Pipe boasts a clean and minimalist aesthetic with no added fuss or muss. It's perfect for those who appreciate a straightforward, functional design. Versatile and Convenient Featuring a standard 14mm female intake, the most popular joint size, this pipe works with almost any adapter. The unfrosted bowl ensures your adapter slides in and out easily, making it a breeze to use. The joint sits at a 45° angle, ensuring that no matter the size of your vape, it won't hit your face or get in the way. This thoughtful design element enhances your overall experience. Classic 'Chug' Feel As vapour passes through the joint, it travels through the downstem into the 3-hole percolator mounted at the bottom of the pipe. This design provides that classic 'chug' feel and sound that enthusiasts love. With a very free airflow design, The Straight Shooter Pipe minimizes draw resistance, ensuring a smooth and enjoyable session every time. Unique and Comfortable The reservoir section features straight sides and a circular shape, giving the pipe a unique look. The straight tube mouthpiece offers a very comfortable using position, and is perfect for handheld use. The Straight Shooter Pipe is a must-have for any enthusiast seeking simplicity and performance in one elegant package.

Read more less

The Super Sub Pipe: More Capable than Most Navies Interesting bit of Canadian history: at one point in the late 80s, the West Edmonton Mall, at the time the largest mall in the world, had more nuclear submarines than the entire Canadian Navy. We may not have as many submarine themed devices as an entire country, even Canada, but we are happy to add another one to our fleet, the Super Sub Pipe. This cavernous water piece will have you exploring the depths of your couch with a pipe that is designed to make the chamber easy to empty without removing your vaporizer. A Built in Pass-Through You Say? Think of the Super Sub as a reworked, restructured version of our Submarine Pipe with one game changing addition: an additional, multipurpose joint. Essentially, the primary use for this joint is as a built-in, pass-through for your water pipe. This makes the chamber easy to empty and as it’s huge, you’ll be able to fill the Super Sub all the way to capacity with vapour and enjoy it all in one toke. Leave Your Vape in for the Entire Session With this built-in ability to clear the chamber, you do not need to remove your vaporizer during your session. We’ve prioritized the business end of the experience, but the operational elements of the pipe are just exceptional. Just drop your vape into the 14mm joint for the entirety of your session and use the included glass plug as a shotgun to exercise your lungs. This is both safer and easier than having to remove your vape each time you want to empty your piece, and everyone loves that. Stable, Large and an Impressive Cooler The Super Sub measures 5.5 inches long and 3.75 inches tall, with a stable base and a large tubular section that’s capable of handling the largest tokes. Its horizontal layout supports a large surface area that helps to efficiently cool and filter the vapour. The 14mm intake joint leads to a low horizontal slit percolator, allowing for varied water volumes. The other end of the piece features another 14mm joint compatible with the included whip, perfect for sharing sessions comfortably. Four glass feet stabilize the Super Sub, helping keep any mess off your surfaces and making it easy to maintain. Its horizontal design flow and whip let you hold your face away from hot vapour, offering a truly comfortable experience for all water pipe enjoyers. The Super Sub Pipe is enough of an upgrade that even owners of the original should take a look. The ability to empty your load with a glass stopper instead of fiddling with getting your hot vape out of a 14mm is the dream. The Super Sub Pipe is a well-rounded water pipe that shines in every aspect.

Read more less

The Donut Pipe Brings Considerable Cooling to Your 14mm Vaporizers Stoners like to show off their gear, especially the high-volume rigs that tend to come out more often when friends are over. You might not know this, but cannabis aficionados can often be quite clumsy, often because of enjoying the aforementioned rig. We love stable rigs with the capacity for a large volume of water, and the Donut Pipe hits the nail on the head. As the wise Homer Simpson said, “Mumm… donuts.” Yes, Homer, ‘mmm, donuts’ indeed. Shaped Like a Donut, Bubbles Like a Pipe Like its namesake, the Donut Pipe is round with a flat base. We focused on a few specific things with this design to ensure that not only did it fit a niche market, but it would also be pretty much anyone’s ideal first water piece. With a 14mm female intake joint that leads into our famous disc percolator, you can drop pretty much any vape that’s native to 14mm or has an adapter and see thousands of bubbles cool down your vapour. Just Add Water for Stability The construction of this piece has a focus on stability. With a capacity for a substantial amount of water, a low centre of gravity, and a whip mouthpiece for tabletop usage, this may be the shortest water piece that we’ve produced without sacrificing stability, water reservoir size or compatibility.  Great With Ball Vapes and More Our favourite way to use the Donut Pipe is with a ball vape and friends. The large amount of water combined with the disc percolator cool down those potent tokes and you won’t have to worry about instability because of the inherent size and weight and the whip is perfect for sharing. The Donut Pipe is also great for something like the Anvil; it’ll let you really milk up the water piece. There’s a Reason Everyone Loves Donuts From Federal Donuts in Philly to Cartems in Vancouver, this classic dessert is enjoyed by everyone. It’s a dependable snack that can easily punch above its weight. The Donut Pipe is an ideal solution for those looking for a water piece that is stable, holds a lot of water, a low-profile mouthpiece and the compatibility to work with most of your vaping arsenal. Find out more about the Donut Pipe here.

Read more less

The Pass-Through Herb Catcher, a True Twofer Lots of people quote Churchill, not nearly enough quote Kevin Malone, and to paraphrase the laureate of The Office, “why have 2 things when 1 do job?” Throughout the years, we’ve released several really innovative and unique products that happen to be super functional, but two that really stick out as far as usability are the Pass-Through Adapter and the Dry Herb Catcher. After a highly elevated “development session” one evening, we thought, why not both? Meet the Pass-Through Dry Herb Catcher, a glass adapter that combines the benefits of a Pass-Through Adapter with the cleanativity of the Dry Herb Catcher. The Safest Way to Use a Shotgun The pass-through section has a 10mm joint mounted on the side, providing an avenue to clear your water piece by removing the included glass stopper, which is much simpler and safer than removing your vaporizer from a water piece. The adapter is fitted with a 14mm joint on either end, a true pass-through adapter. Keep Your Flower Out Of The Water The dry herb catching element keeps the vast majority of flower particulate in the basin, where it belongs, rather than in your water piece. Ideally, let your herb catching filter collect a little resin, as that will be the best tool to catch the smallest of particles.  Do More With Less Steve Jobs was probably pretty faded when he came up with the iPhone; it was an iPod, a phone, and an internet device all in one for heaven’s sake. We’re more than happy to follow that up with the Pass-Through Dry Herb Catcher, two of our most useful and popular custom glass accessories combined into one uber piece that serves multiple functions without needing multiple pieces.

Read more less

The Party Globe Brings Joy to the Masses We've got something to tell ya; we've got news for you. Gonna put some wheels in motion, get ready 'cause we're coming through with the Party Globe. Did we go to far? Arguably. Do we regret it? Nope. The Party Globe is everything that your guidance counsellor warned you about; this is your brain on drugs. As Wayne and Garth might say, “Party Time, excellent!” Building Off Our Best The Party Globe uses our super popular Mega Globe as its foundation, and our Flat Earth base as its… foundation.  Combining these two iconic pieces brings you something that you’re familiar with that also has the stability to handle even the most rambunctious sessions, and then we build upon that, further. Compatible With Most Vaporizers, Even Heavy Hitters The Party Globe has an 18mm input, wider than the Mega Globe, and this is super intentional as you’ll now be able to use larger vaporizers, and we’ll get into why size matters (just in this case, we swear). If you do want to stick with 14mm, though, we’ve included an adapter that works seamlessly and lets you use a wider variety of your arsenal. The Party Globe uses our most popular, free flowing percolator, the Stereo Matrix, to make sure you can pull as hard as you want and never get milkshake’d™️. Chase the biggest clouds with the least effort; sounds good, right? But, where’s the party? Four Score and Seven Grams Ago The Party Globe does take advantage of a 14mm output you can rip on with the included whips or the glass mouthpiece. Wait, there’s more? That many, seriously? The Party Globe has FOUR 14mm outputs with FOUR included whips for the most excellence of party times with your buds simultaneously. Amazing! Only need one or two whips? No problem, just use the included stoppers to open as many or as few outputs as desired. Hey now, hey now, hear what I say now, happiness is just around the corner; we'll be there for you, with the Party Globe. Whether you’re looking to party with a group, or be a one-man roving shindig, the Party Globe is the most unique piece we’ve designed, and we hope you’re as excited as we are with this free-flowing multi-person party machine.

Read more less