Our XL Clear Terp Pearls are made of 100% pure quartz and they’re 6mm diameter instead of the traditional 4mm size. That may not sound like a huge difference, but it more than doubles the pearl’s surface area and triples its volume, so the pearl stays hot much, much, much, much longer (quadruple much-es!). Put a couple inside the bucket before heating and use the airflow from one of our carb caps to push them around in your oil. Hot pearls efficiently vaporize the oil as they roll, so they're perfect for taking huge slabs or micro-dabbing.
Key Features:
- Pure quartz- 6mm diameter- Comes in pack of 5- Adds XL efficiency and fun
This Sidestep Adapter is sized 14mm with a male joint at one end and a female joint at the other. There isn’t much vertical difference between the joints, but it moves the connection about 3.5” off to the side of the Mega Globe, so now your vapes and bangers won’t sit directly on your rig itself. Sidesteps are handy to catch debris and reclaim, keeping your water piece cleaner. You’ll also protect your Mega Globe (or another piece, it fits any 14mm rig) from being in direct contact with vapes or hot bangers. Keep your investment safe and save time on maintenance with our Sidestep Adapter for the Mega Globe.
The Aristocrat Stem introduces extra length and sophistication to your DynaVap set-up. Measuring in at an extended 90mm length, the Aristocrat Stem is easier to handle for large hands and also offers some additional cooling. Available in seven striking colours, add the purity of glass and a fancy look to your DynaVap.
* DynaVap Tip NOT included.
Key Features:
- Extended 90mm length- Works with any DynaVap tip- Add the purity of glass to the DynaVap- Does not have a carb hole- Available in seven different colour options
*Also works perfectly with the Healthy Rips Fury Edge
These adapters will allow you to use any two 14mm female joints together. The adapters are sturdy and approximately 2.5" tall, and will work with your favorite water piece and vaporizer adapter.
The Strong-Arm DynaVap Adapter will allow you to use your DynaVap Tip directly with a water pipe! Simply place a DynaVap Tip into the Strong-Arm and you're ready to hit your DynaVap through a 10mm, 14mm, or 18mm female water pipe. This is the easiest and most convenient way to use your DynaVap through a water pipe, and your vapour will touch nothing but the purity of glass.
Key features:
- Works with 10mm, 14mm, or 18mm female water pipes- Enhanced tighter fit- Approximately 3" in length
The Hula Stem V2 pairs with a stainless steel or titanium DynaVap tip to add cooling and the purity of glass to your DynaVap experience. Simply place any DynaVap tip onto the Hula Stem and heat like normal. The stem will help to cool down your vapour with its indentations that add surface area to the vapor pathway. By replacing your current DynaVap body with a glass Hula Stem V2, you are creating an incredibly pure vapor path, many people prefer glass, even over the higher-end metals like titanium.
** DynaVap Tip NOT included.
Key features:
- Indentations add surface area and help to cool vapor - Enhanced tighter fit- Add the purity of glass to the DynaVap- 2.5" total length- Available in seven different color options
**Do not over-tighten the adapter onto your vaporizer! It only needs a slight/eighth turn, over-tightening will damage your vaporizer.**
This water pipe adapter is designed to fit Crafty and Mighty vaporizers to take your vaping to the next level. Plumb in a water pipe to your vape set-up for cooler vapour, concentrating it through percolation for larger and cloudier hits. The adapter comes in 14mm and 18mm male vaporizer joint variations, and connects universally to 10mm, 14mm, and 18mm female water pieces.
Easy to install, simply remove the cooling unit on your vaporizer, then line up the slots on the adapter with the holes on your device. Very slightly twist the adapter to secure it; an eighth turn will make it completely secure. Be sure not to twist the adapter too much! Over-tightening will damage your vaporizer.
Once the adapter is secured, attach your modified vaporizer to your water pipe of choice and enjoy fresh water hits. Highly recommended for Crafty and Mighty users for a superior vape experience.
Key Features:
- Compatible with Crafty, Crafty+, Mighty, or Mighty+ vaporizers- Durable plastic housing contains borosilicate glass for a pure vapor path- Replaceable screen included- Easy to assemble - Available with a 14mm or 18mm male vaporizer joint- Universally adapts to 10mm, 14mm, and 18mm female water pieces
Cool Down Your Arizer Vaporizer
The Arizer 3D Flow Stem features visually striking and functional divots throughout the length of the stem to increase the surface area your vapor passes over. The increased surface area allows for more cooling of the vapor, resulting in a smoother draw. The divots do not restrict the airflow in any way, and the stems provide a clear draw for large and cool hits.
Key Features:
- Compatible with the Arizer Solo, Solo 2, and Air 2, Air MAX, Solo 2 MAX- The increased surface area provided by the divots reduces the vapor temperature- Great airflow- Easy to clean- Divots are visually striking- Durable glass construction
Glass it up! Add this optional glass mouthpiece to your Globe (or replace the one that comes with the Mega Globe) for a next level experience. The mouthpiece is small and lightweight, with great lip-feel and reduced draw resistance compared a whip.
Key Features:
- 4.25" length- Ends in a 14mm male joint- This mouthpiece can also be used with the Magic Flight Orbiter
Adapters are Cheaper Than New Glass
These adapters will allow you to use two male joints together. The adapters are sturdy and approximately 2.5" tall, and will work with your favorite water piece and vaporizer adapter.
Two Sizes Fit Your Needs
To attach two 14mm male pieces, select the 14mm Female to 14mm Female Adapter.
To attach one 14mm male and one 18mm male piece, select the 14mm Female to 18mm Female Adapter.
