Rise Up and Cool Down with the Arizer Bead Stem
Many of our favourite devices come equipped by default with a relatively short output that does very little to substantially impact the cooling of the vapour that’s created, resulting in unwanted coughs and unnecessary sore throats. Ideally, you’re going to want to run your rig through water for the best cooling, but if you’re out and about, that’s rarely an option. The Arizer Bead Stem is an incredibly effective cooling stem that will work with several of the most popular and powerful devices available. Let’s dig into what makes the Arizer Bead Stem so great.
Familiar Technology Executes Impressively for Better Cooling
By now, most of us are familiar with ball vapes, but for those who aren’t, essentially your flower is vaporized by a wand that’s head is full of quartz balls heated by an electric coil. With the Arizer Bead Stem, we went in the exact opposite direction; the quartz beads in the stem act to pull heat from your vapour to provide a more enjoyable session. These balls are on the larger side and are effective at drawing a tonne of heat out of your vapour while providing less airflow restriction than the smaller balls you’ll find in other stems.
A Lateral Evolution of the Rocket Stem
Speaking of the Rocket Stem, the Bead Stem has a thinner profile making it easier to take on the go. You can also remove the beads in the Bead Stem, making it even easier to clean than the Rocket Stem. The Bead Stem has a two-piece glass section, one section that holds the quartz balls in place and the second part that connects to the stem through a gasket connection. This choice for a two-piece construction allows for the easiest maintenance and maximum airflow possible.
Effective, Compacted and Ready to Take with You
The Arizer Bead Stem attaches to your device directly and includes a built-in permanent glass screen for easier maintenance. The Arizer Bead Stem works with the Solo 3, Solo 2, Solo 2 MAX, Air MAX, Air SE, and is a highly efficient, compact stem that will definitely outperform the standard dry stem that your device was shipped with.
If the Arizer Air 2 or Solo 2 are part of your vape game, well, here's a game changer! The BubbleMax gives you the cooling of a large water-piece in a compact package, delivering cool hits through your Arizer vape. The difference in performance after adding the BubbleMax is dramatic, while maintaining the discrete and portable attributes of Arizer vapes.
Standing 6" tall with a tube percolator boasting four slits for additional bubbling, the BubbleMax gives you an easy draw from a mouthpiece canted to a comfortable position, all through pure glass, tip to tip. We designed and built both variants of the BubbleMax here at Sneaky Pete Vaporizers to fit perfectly with the Multi-Stand, and it's an addition we're thrilled to share with you. Get the cooling you'd expect from a stand-alone water-piece and change your game.
Get the BubbleMax; it's cool.
- Compatible with the Arizer Air MAX, Solo 2, Air SE and Air 2- Numerous slits on percolator provide cooler temperature hits- Ultimate purity from all glass production with a permanent filter - Portable and discrete, but highly effective- Designed to be a significant improvement over the stock experience- We love this one!- Never leave a water piece unattended on your vape, remove between uses
A New Take On A Classic Tool
The J-Hook is a glass design that probably predates smoking shake out of an apple. Probably. It’s a great look and its incredibly effective for its size at cooling down vapour. The Beaded J-Hook is a blast to use and levels up this classic “cool without water” tool in a colourful fashion with small glass beads that act to cool down your vapour more than the original does.
Add Cooling Without Water
We really like using J-Hooks as a solution to cool down your vapour without needing to add water to the equation, because they use distance instead. This makes the design inherently more mobile than a water pipe because there’s no chance of spillage. The shape also holds your vaporizer a comfortable distance from your face and that makes it not only easier to see what you’re doing, but moves the heat away from your face, too.
Glass Beads Cool Your Vapour
The Beaded J-Hook includes a 14mm joint for maximum compatibility and to really get crazy with it, the secret to the Beaded J-Hook? Beads! Glass beads have an innate ability to absorb heat from the airpath so that it doesn’t reach your lungs as well as causing additional airpath disruption that enhances the cooling possibilities. Because of all the commotion, your vapour will hit every square millimetre of the J-Hook, proving cooling that the original never could.
Easy To Clean
As easy to clean as any piece of 100% glass, the Beaded J-Hook toes the line between form and function while providing an ideal waterless solution to cooling down your vapour. Enjoy the Beaded J-Hook and its colourful glass balls with your favourite 14mm vaporizers or use a Master Adapter for further options.
When you want extra cooling for your Puffco Peak Pro or Peak, the Bent-Neck Peak Pro Top is your ticket. The Pro Top holds a massive volume of water compared to the stock piece, and it will make every hit much cooler, while also adding additional filtration.
The Bent-Neck Peak Pro Top is the perfect upgrade from the original water attachment of either Puffco Peak device. It’s sized to fit directly onto your Pro or Classic base and has an effective percolator that holds more water, effectively cooling those monster rips that the Peaks are known for.
Another advantage of this piece is the drawn out and bent neck. Compared to the straight opening in the top of the original model, the bent neck design more naturally matches the angle you use when operating the Pro or Classic, so it's much more comfortable - plus the bend helps to eliminate any accidental drinking.
The mouthpiece is flared and worked for a more natural feel. The glass is thick, durable, and attractive, complementing the Peak’s sophisticated design. The Bent-Neck Peak Pro Top is a true upgrade.
**Do not over-tighten the adapter onto your vaporizer! It only needs a slight/eighth turn, over-tightening will damage your vaporizer.**
This water pipe adapter is designed to fit Crafty and Mighty vaporizers to take your vaping to the next level. Plumb in a water pipe to your vape set-up for cooler vapour, concentrating it through percolation for larger and cloudier hits. The adapter comes in 14mm and 18mm male vaporizer joint variations, and connects universally to 10mm, 14mm, and 18mm female water pieces.
Easy to install, simply remove the cooling unit on your vaporizer, then line up the slots on the adapter with the holes on your device. Very slightly twist the adapter to secure it; an eighth turn will make it completely secure. Be sure not to twist the adapter too much! Over-tightening will damage your vaporizer.
Once the adapter is secured, attach your modified vaporizer to your water pipe of choice and enjoy fresh water hits. Highly recommended for Crafty and Mighty users for a superior vape experience.
Key Features:
- Compatible with Crafty, Crafty+, Mighty, or Mighty+ vaporizers- Durable plastic housing contains borosilicate glass for a pure vapor path- Replaceable screen included- Easy to assemble - Available with a 14mm or 18mm male vaporizer joint- Universally adapts to 10mm, 14mm, and 18mm female water pieces
The Crafty+ and Mighty+ by Storz & Bickel are two of the most popular portable vaporizers on the market and we’re constantly looking for new ways to customize and improve them. These vapes are quite large for portables, and they have sizeable bowls as well, leading to you using more flower on a per session basis than you might with other vaporizers.
In the spirit of conservation and flavour enhancement, we’re proud to offer Crafty+/Mighty+ Glass Bowl Reducers. These pure glass Reducers allow you to retain the usual performance and flavour of your device while using substantially less flower.
The set includes two Reducers that have the same overall circumference but different gauges of chamber. Essentially, you can use the one to reduce the native bowl, or the second one to reduce it even further. This ensures you will be changing out your bowls more often, resulting in fresher hits with better overall flavour.
These Reducers are easy to use, just pop them in before you fill your bowl, and they’ll come out with gravity while debowling. The Reducer will be hot after use, so be careful.
Crafty+/Mighty+ Glass Bowl Reducers dramatically cut down the flower you need per session, provide better overall effects and flavor, and keep the taste and vapour performance the devices offer. What more could you want? No, seriously, tell us, we might make it.
The Crafty+/Mighty+ Mini Bubbler fits snugly on either device, and comes with a soft silicone base, or with a two-piece design depending on your preference. The bubbler delivers cooling hydration to your vape hits, while being small and discrete enough to take with you on-the-go, or keep out of sight at home. A screen on the bottom of the Mini Bubbler is designed to prevent flower from getting into the water piece, keeping the experience clean and pleasant. The Crafty+/Mighty+ Mini Bubbler is well built, and will elevate your vaping experience with cool, water-conditioned vapour.
Works with the Crafty, Crafty+, Mighty, or Mighty+ by Storz & Bickel.
Experience Serious Cooling On-The-Go
Get ready to be blown away by the extraordinary power and abundant vapour production of the Crafty+ and Mighty+ portable vaporizers. These incredible devices deliver some of the most voluminous and high-quality vapour available. However, we understand that the intense hit can sometimes leave you craving a cooler experience, especially when water isn't readily available on your travels. That's where the XL Rocket Stem for Crafty+ and Mighty+ comes in.
Unleash Cooling Power with Glass Beads
Designed with innovation in mind, the Rocket Stem offers substantial cooling in a compact form. With a built-in screen and easy maintenance, this stem incorporates clever glass beads that not only provide cooling but also help to trap any flower pieces, ensuring a smooth and clean vape session. Instead of hot vapour hitting your throat directly, it will pass through a screen and into the XL Rocket Stem, where it undergoes a cooling transformation.
A Visual Delight with Tri-Coloured Bead Design
Prepare to be mesmerized by the stunning array of red, green, and dark blue beads within the XL Rocket Stem. This one-of-a-kind design effectively disrupts the vapour's direct path, significantly cooling it down before it reaches your lips. As the vapour makes its journey through the glass beads, it absorbs heat, resulting in an even more enjoyable vaping experience. Plus, the beads are cleverly secured by glass pinches, ensuring they stay in place, no matter where you go.
Introducing the Ultimate Crafty+ or Mighty+ Stem
Measuring just over 4" tall, the Rocket Stem is the perfect travel companion, delivering exceptional cooling that surpasses what a regular straight stem of this length can provide. Whether you're embarking on an adventure with your Crafty+ or Mighty+, or even the original Crafty or Mighty vaporizer, the XL Rocket Stem is the ideal accessory to achieve a rich and flavourful vapour, all without the need for water. Elevate your vaping experience with the XL Rocket Stem for Crafty+ or Mighty+. Your ticket to cool, satisfying hits wherever you roam.
The Crafty and Mighty undoubtedly have some of the highest quality plastic construction you'll find on a vape, but even the best plastic will never be comparable to glass! This glass mouthpiece enhances your Crafty or Mighty experience by adding extra cooling, air-path purity, and an improved mouth feel, while still maintaining the same form and function as the original plastic mouthpiece. Once you try this glass mouthpiece you won't want to go back to the plastic one. Also works with the Boundless CFX!
Key features:
- Works with Crafty, Crafty+, Mighty, Mighty+, and Boundless CFX- Silicone ring holds glass in place- Much better than the original component
The Crafty+/Mighty+/DynaVap 14mm Whip Adapter is the perfect way to add some length to your air-path and cool your hits through a water pipe while using these top-notch dry herb vaporizers.
This super direct and straightforward way to lower your vapour temperature attaches directly to the stock mouthpiece of your Crafty or Mighty; there is no need to remove the cooling unit. When using the Whip Adapter, you can keep your vape upright, there is no need to invert it, just hold it in your hand, sit it on a table, or whatever you prefer.
Measuring just under 35cm long, the business end of the Whip ends in a 14mm male joint for maximum compatibility. The end which attaches to the mouthpiece of your vaporizer has a nice tight fit for a perfect seal.
A great option for any owner of a Crafty, Crafty+, Mighty, or Mighty+, add the 14mm Whip Adapter for an easy, viable cooling option.
This adapter will also work with any standard DynaVap body to add a 14mm male whip adapter to your favourite VapCap!
Keep Your Water Pipe Clean
Dry Herb Catchers are the must-have accessory that you never knew you needed. When using a water piece, as you inhale through a vaporizer, small bits of flower will inevitably pass through the adapter and enter into your water piece, which can make a mess. A Dry Herb Catcher sits on the intake joint of your water piece, and acts as first stage filtration to prevent the majority of that flower from entering into your water piece, keeping it way cleaner for much longer. As they are made from glass and hold no water themselves, they will not reduce the flavour or strength of that delicious vapour.
A Dry Herb Catcher can come in different shapes and styles, all having their own unique advantages. You can select from the Barrel, High Airflow, or the Mr. Twister version of Dry Herb Catcher, depending on your preferences.
All of our Dry Herb Catchers feature a 14mm female input joint and a 14mm male output joint.
There’s something about the simplicity of glass. DynaVap brings you the BB3, BB6 and BB9 glass stems to translate that straightforwardness and transparency to your DynaVap tips and experience.
Available in three different sizes, the BB system is the simplest and purest way to use your DynaVap. The BBs work with any tip or cap that you own, and do not require a condenser like most of the DynaVap and after-market stems.
Working well dry or through water filtration, the BB features an airport to easily clear a water piece without needing to remove the stem. The tube itself is fitted with glass nipples that both cool the vapour by creating a more complex vapour pathway and act to hold the blue diffusion balls in place.
As the shortest and most travel friendly stem, the BB3 has three diffusion balls and works with a 10mm female joint. The middle sized BB6 includes six diffusion balls and works with either a 14mm or 10mm female joint. Lastly, the largest BB9 offers the most cooling, with nine diffusion balls and like its middle sister, it works well with either 10mm or 14mm female joints.
By bringing you the BB system, DynaVap now has a glass option for its well-known tips. Enjoy the purity and simplicity of glass with the DynaVap BB3, 6 and 9 stems.
