GWN5 INELIGIBLE PRODUCTS

Bring harmony to your vape setup with this versatile adapter. This low profile adapter is the super easy way to turn your 14mm female joint into a 10mm female. It allows you to hook up your favorite 14mm female water piece...
This adapter allows you to hook any of our 14mm male adapters to your 18mm female water tool.  If your water tool has an 18mm female joint, this is what you need to use any of our adapters.
These adapters will allow you to use two male joints together.  The adapters are sturdy and approximately 2.5" tall, and will work with your favorite water piece and vaporizer adapter.   To attach two 14mm male pieces, select the 14mm...
Complete your V.A.S. (Vaporizer Accessory Stand) with a Round Top or Flat Top Glass Stopper. Made from borosilicate glass, the Glass Stopper allows you to fill the reservoir arm with isopropyl alcohol and will prevent the alcohol from evaporating. Isopropyl alcohol is the ultimate...
This bowl will fit into 14mm female joints. Three grips make it easy to use for the biggest hits!
These adapters will allow you to use any two 14mm female joints together.  The adapters are sturdy and approximately 2.5" tall, and will work with your favorite water piece and vaporizer adapter.
These adapters will allow you to use any 18mm male joint with your favorite 14mm female water piece! The adapters are sturdy and approximately 2.5" tall, and will work with your favorite water piece and vaporizer adapter.
This 18mm Female to 14mm Male Bowl is a luxurious replacement for the default solution for the Terp Torch or Elev8r systems. Utilizing an unfrosted 18mm joint for smoother operation when compared to frosted, this glass bowl is as beautiful...
Everyone likes their glass, adapters and equipment to look and operate like it's brand new. We want to make sure that you can keep your tubing looking and operating at peak performance for a reasonable cost. The 36” Globe Whip...
Take a stand for your 510 Cartridges! Our sturdy, custom-made, threaded stands will hold your cartridge firmly in place, which means they're always where you left them. The stands are also perfect for filling your cartridges, allowing the material to...
Modeled after our 510 Cartridge Stand, the 510 Triple Cartridge Stand holds up to three cartridges at once. Ideal for multi-cartridge users, this lets you secure more cartridges in one place, whether it's for filling, on the go sessions, or...
An absolute necessity for vaporists and concentrate users, 99% Isopropyl Alcohol is the highest strength, purest cleaning alcohol available. Primarily used to remove that unwanted buildup and resin on your glass, you won’t find a more efficient product to keep...
The Aristocrat Stem introduces extra length and sophistication to your DynaVap set-up. Measuring in at an extended 90mm length, the Aristocrat Stem is easier to handle for large hands and also offers some additional cooling. Available in seven striking colours,...
With our Arizer 3-in-1 Glass Adapter, you can use your Solo 2 or Air 2 on any water piece with a female joint. It is the perfect option for any Arizer owner to enhance their experience with a water tool and keep an all-glass...
The Arizer 3D Flow Stem features visually striking and functional divots throughout the length of the stem to increase the surface area your vapor passes over. The increased surface area allows for more cooling of the vapor, resulting in a...
Have you ever wished you had a perfect place to organize your Arizer Air 2 (or original Arizer Air) and favorite stems? Well that wish has be fulfilled by the Arizer Air 2 Ultimate Debowler Stand. This multipurpose stand holds...
This adapter fits directly into your Arizer Air 2/Solo 2, replacing the traditional stem. It is very easy to install on your device, and it's just as easy to remove (it has a tight fit, heat your device before you...
A very cool stealth mod for the Arizer Solo 2!  These black glass stems are seriously cool and they bring a new look to your vaporizer.  You can choose from either the longer or shorter size, or the super comfortable...
If the Arizer Air 2 or Solo 2 are part of your vape game, well, here's a game changer! The BubbleMax gives you the cooling of a large water-piece in a compact package, delivering cool hits through your Arizer vape...
If you’re looking for a way to bring the effectiveness of water cooling to your Arizer vape without the water, look no further than the Arizer Coil Stem. Vapour will travel through over 12” of coiled cooling glass before it...
This 3-In-1 Adapter will allow you to use your Arizer Go (ArGo) with either a 10mm, 14mm, or 18mm female water piece! The Arizer Go is an amazing portable, but it's also a great vaporizer to run through water. You...
The Arizer High Airflow 3-in-1 adapter features one single large diameter hole in the vapor path protecting your herb with a stainless-steel screen. Sized to work perfectly with either the Solo 2 or Air 2, this adapter fits on any...
The Arizer High Airflow Coil Stem is an effective way to add the effects of boosted water cooling to your Arizer Air 2 or Solo 2 without needing to add liquid. Vapour will travel through over 12” of coiled cooling...
These screens will fit into any standard Arizer Stem (including the Black Stems available on our site, screens will need to be adjusted for use with the ArGo).  Adding a screen to your stem will prevent any plant material from...
Compatible with the Arizer Solo 2 and Air 2, the Arizer UltraDry Stem is a custom made stem featuring 10 pairs of glass cooling nipples to disrupt vapor flow and mellow out your hit. The UltraDry Stem also has an easily accessible carb hole to allow you...
We got these Quartz Bangers custom made to work with our glass, but they'll work with whatever you have! 90° bangers that have nice thick glass, 4mm all around. This will retain heat nicely, and allow you to time out...
Looking for a killer candle to help with unwanted odours in your place? Well your search is over, the Cannabis Killer Candle from Beamer will take care of those odours, and how! Packed into a 12oz mason jar for easy...
When you want extra cooling for your Puffco Peak Pro or Peak, the Bent-Neck Peak Pro Top is your ticket. The Pro Top holds a massive volume of water compared to the stock piece, and it will make every hit...
Glass blowing has been an art-form since its inception and since then there has been an almost endless supply of incredibly beautiful pieces. The Birds & Blossoms Dispersion Cap maintains that tradition - a creative, gorgeous piece that also offers...
Combining pure talent, decades of hard work and learning, and true passion for this industry and his art-form; Ed’s TNT makes some of the finest wooden vapes and accessories you can find on either side of the Mississippi River. Blackwood...
Sale
Featuring a unique angled head design that facilitates a better tilt towards your device than standard flat headed torches, the Blazer ES-1000 is a slim yet powerful micro torch that includes a top mounted flame temperature lever that allows for...